[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1616662832-27048-2-git-send-email-victor.liu@nxp.com>
Date: Thu, 25 Mar 2021 17:00:28 +0800
From: Liu Ying <victor.liu@....com>
To: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org
Cc: kishon@...com, vkoul@...nel.org, robh+dt@...nel.org,
a.hajda@...sung.com, narmstrong@...libre.com,
Laurent.pinchart@...asonboard.com, jonas@...boo.se,
jernej.skrabec@...l.net, airlied@...ux.ie, daniel@...ll.ch,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com, agx@...xcpu.org,
robert.chiras@....com, martin.kepplinger@...i.sm,
robert.foss@...aro.org
Subject: [PATCH v5 1/5] drm/bridge: nwl-dsi: Set PHY mode in nwl_dsi_enable()
The Northwest Logic MIPI DSI host controller embedded in i.MX8qxp
works with a Mixel MIPI DPHY + LVDS PHY combo to support either
a MIPI DSI display or a LVDS display. So, this patch calls
phy_set_mode() from nwl_dsi_enable() to set PHY mode to MIPI DPHY
explicitly.
Cc: Guido Günther <agx@...xcpu.org>
Cc: Robert Chiras <robert.chiras@....com>
Cc: Martin Kepplinger <martin.kepplinger@...i.sm>
Cc: Andrzej Hajda <a.hajda@...sung.com>
Cc: Neil Armstrong <narmstrong@...libre.com>
Cc: Laurent Pinchart <Laurent.pinchart@...asonboard.com>
Cc: Jonas Karlman <jonas@...boo.se>
Cc: Jernej Skrabec <jernej.skrabec@...l.net>
Cc: David Airlie <airlied@...ux.ie>
Cc: Daniel Vetter <daniel@...ll.ch>
Cc: NXP Linux Team <linux-imx@....com>
Reviewed-by: Guido Günther <agx@...xcpu.org>
Signed-off-by: Liu Ying <victor.liu@....com>
---
v4->v5:
* No change.
v3->v4:
* No change.
v2->v3:
* No change.
v1->v2:
* Add Guido's R-b tag.
drivers/gpu/drm/bridge/nwl-dsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 66b6740..be6bfc5 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -678,6 +678,12 @@ static int nwl_dsi_enable(struct nwl_dsi *dsi)
return ret;
}
+ ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to set DSI phy mode: %d\n", ret);
+ goto uninit_phy;
+ }
+
ret = phy_configure(dsi->phy, phy_cfg);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
--
2.7.4
Powered by blists - more mailing lists