| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Mar 2021 22:24:42 +0800
From: Kai-Heng Feng <kai.heng.feng@...onical.com>
To: Takashi Iwai <tiwai@...e.de>
Cc: Takashi Iwai <tiwai@...e.com>, Jaroslav Kysela <perex@...ex.cz>,
Pavel Skripkin <paskripkin@...il.com>,
Chris Chiu <chiu@...lessm.com>,
Mark Brown <broonie@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Tom Yan <tom.ty89@...il.com>, Joe Perches <joe@...ches.com>,
"moderated list:SOUND" <alsa-devel@...a-project.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] ALSA: usb-audio: Check connector value on resume
On Thu, Mar 25, 2021 at 9:55 PM Kai-Heng Feng
<kai.heng.feng@...onical.com> wrote:
>
> On Thu, Mar 25, 2021 at 9:41 PM Takashi Iwai <tiwai@...e.de> wrote:
> >
> > On Thu, 25 Mar 2021 13:12:48 +0100,
> > Kai-Heng Feng wrote:
> > >
> > > Rear Mic on Lenovo P620 cannot record after S3, despite that there's no
> > > error and the other two functions of the USB audio, Line In and Line
> > > Out, work just fine.
> > >
> > > The mic starts to work again after running userspace app like "alsactl
> > > store". Following the lead, the evidence shows that as soon as connector
> > > status is queried, the mic can work again.
> > >
> > > So also check connector value on resume to "wake up" the USB audio to
> > > make it functional.
> > >
> > > This can be device specific, however I think this generic approach may
> > > benefit more than one device.
> > >
> > > While at it, also remove reset-resume path to consolidate mixer resume
> > > path.
> > >
> > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> > > ---
> > > v2:
> > > - Remove reset-resume.
> > > - Fold the connector checking to the mixer resume callback.
> >
> > That's not what I meant exactly... I meant to put both into the
> > single resume callback, but handle each part conditionally depending
> > on reset_resume argument.
>
> OK, I get what you mean now.
>
> >
> > But this turned out to need more changes in mixer_quirks.c
> > unnecessarily. Maybe adding the two resume functions is a better
> > approach in the end, but not for the specific connection thing but
> > generically both resume and reset_resume callbacks. Something like
> > below.
>
> This approach looks good. Let me send another one.
Actually, it works really well and I don't I think I should send the
code you wrote.
Is it possible to push your version with my commit log, and with my tested tag?
Tested-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> Kai-Heng
>
> >
> >
> > thanks,
> >
> > Takashi
> >
> >
> > diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
> > index b004b2e63a5d..1dab281bb269 100644
> > --- a/sound/usb/mixer.c
> > +++ b/sound/usb/mixer.c
> > @@ -3615,20 +3615,43 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list)
> > return 0;
> > }
> >
> > +static int default_mixer_resume(struct usb_mixer_elem_list *list)
> > +{
> > + struct usb_mixer_elem_info *cval = mixer_elem_list_to_info(list);
> > +
> > + /* get connector value to "wake up" the USB audio */
> > + if (cval->val_type == USB_MIXER_BOOLEAN && cval->channels == 1)
> > + get_connector_value(cval, NULL, NULL);
> > +
> > + return 0;
> > +}
> > +
> > +static int default_mixer_reset_resume(struct usb_mixer_elem_list *list)
> > +{
> > + int err = default_mixer_resume(list);
> > +
> > + if (err < 0)
> > + return err;
> > + return restore_mixer_value(list);
> > +}
> > +
> > int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume)
> > {
> > struct usb_mixer_elem_list *list;
> > + usb_mixer_elem_resume_func_t f;
> > int id, err;
> >
> > - if (reset_resume) {
> > - /* restore cached mixer values */
> > - for (id = 0; id < MAX_ID_ELEMS; id++) {
> > - for_each_mixer_elem(list, mixer, id) {
> > - if (list->resume) {
> > - err = list->resume(list);
> > - if (err < 0)
> > - return err;
> > - }
> > + /* restore cached mixer values */
> > + for (id = 0; id < MAX_ID_ELEMS; id++) {
> > + for_each_mixer_elem(list, mixer, id) {
> > + if (reset_resume)
> > + f = list->reset_resume;
> > + else
> > + f = list->resume;
> > + if (f) {
> > + err = list->resume(list);
> > + if (err < 0)
> > + return err;
> > }
> > }
> > }
> > @@ -3647,6 +3670,7 @@ void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list,
> > list->id = unitid;
> > list->dump = snd_usb_mixer_dump_cval;
> > #ifdef CONFIG_PM
> > - list->resume = restore_mixer_value;
> > + list->resume = default_mixer_resume;
> > + list->reset_resume = default_mixer_reset_resume;
> > #endif
> > }
> > diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
> > index c29e27ac43a7..e5a01f17bf3c 100644
> > --- a/sound/usb/mixer.h
> > +++ b/sound/usb/mixer.h
> > @@ -69,6 +69,7 @@ struct usb_mixer_elem_list {
> > bool is_std_info;
> > usb_mixer_elem_dump_func_t dump;
> > usb_mixer_elem_resume_func_t resume;
> > + usb_mixer_elem_resume_func_t reset_resume;
> > };
> >
> > /* iterate over mixer element list of the given unit id */
> > diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
> > index ffd922327ae4..b7f9c2fded05 100644
> > --- a/sound/usb/mixer_quirks.c
> > +++ b/sound/usb/mixer_quirks.c
> > @@ -151,7 +151,7 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer,
> > *listp = list;
> > list->mixer = mixer;
> > list->id = id;
> > - list->resume = resume;
> > + list->reset_resume = resume;
> > kctl = snd_ctl_new1(knew, list);
> > if (!kctl) {
> > kfree(list);
Powered by blists - more mailing lists