| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 28 Mar 2021 16:28:37 +0100
From: Mark O'Donovan <shiftee@...teo.net>
To: corbet@....net
Cc: linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
Mark O'Donovan <shiftee@...teo.net>
Subject: [PATCH] Documentation: Add leading slash to some paths
Change multiple sys/xyz to /sys/xyz
Signed-off-by: Mark O'Donovan <shiftee@...teo.net>
---
Documentation/admin-guide/mm/numaperf.rst | 2 +-
Documentation/fb/fbcon.rst | 4 ++--
Documentation/hid/intel-ish-hid.rst | 2 +-
Documentation/leds/leds-lm3556.rst | 28 +++++++++++------------
4 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst
index c2f826409bf0..166697325947 100644
--- a/Documentation/admin-guide/mm/numaperf.rst
+++ b/Documentation/admin-guide/mm/numaperf.rst
@@ -151,7 +151,7 @@ Each cache level's directory provides its attributes. For example, the
following shows a single cache level and the attributes available for
software to query::
- # tree sys/devices/system/node/node0/memory_side_cache/
+ # tree /sys/devices/system/node/node0/memory_side_cache/
/sys/devices/system/node/node0/memory_side_cache/
|-- index1
| |-- indexing
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index 57f66de2f7e1..212f7003cfba 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -207,9 +207,9 @@ Documentation/driver-api/console.rst. To summarize:
Echo a value to the bind file that represents the framebuffer console
driver. So assuming vtcon1 represents fbcon, then::
- echo 1 > sys/class/vtconsole/vtcon1/bind - attach framebuffer console to
+ echo 1 > /sys/class/vtconsole/vtcon1/bind - attach framebuffer console to
console layer
- echo 0 > sys/class/vtconsole/vtcon1/bind - detach framebuffer console from
+ echo 0 > /sys/class/vtconsole/vtcon1/bind - detach framebuffer console from
console layer
If fbcon is detached from the console layer, your boot console driver (which is
diff --git a/Documentation/hid/intel-ish-hid.rst b/Documentation/hid/intel-ish-hid.rst
index f6ce44ff611d..7a851252267a 100644
--- a/Documentation/hid/intel-ish-hid.rst
+++ b/Documentation/hid/intel-ish-hid.rst
@@ -345,7 +345,7 @@ Documentation/ABI/testing/sysfs-bus-iio for IIO ABIs to user space.
To debug ISH, event tracing mechanism is used. To enable debug logs::
echo 1 > /sys/kernel/debug/tracing/events/intel_ish/enable
- cat sys/kernel/debug/tracing/trace
+ cat /sys/kernel/debug/tracing/trace
3.8 ISH IIO sysfs Example on Lenovo thinkpad Yoga 260
-----------------------------------------------------
diff --git a/Documentation/leds/leds-lm3556.rst b/Documentation/leds/leds-lm3556.rst
index 1ef17d7d800e..32e3983473ba 100644
--- a/Documentation/leds/leds-lm3556.rst
+++ b/Documentation/leds/leds-lm3556.rst
@@ -23,7 +23,7 @@ from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
or by pulling the STROBE pin HIGH.
-LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
+LM3556 Flash can be controlled through /sys/class/leds/flash/brightness file
* if STROBE pin is enabled, below example control brightness only, and
ON / OFF will be controlled by STROBE pin.
@@ -32,17 +32,17 @@ Flash Example:
OFF::
- #echo 0 > sys/class/leds/flash/brightness
+ #echo 0 > /sys/class/leds/flash/brightness
93.75 mA::
- #echo 1 > sys/class/leds/flash/brightness
+ #echo 1 > /sys/class/leds/flash/brightness
...
1500 mA::
- #echo 16 > sys/class/leds/flash/brightness
+ #echo 16 > /sys/class/leds/flash/brightness
Torch Mode
^^^^^^^^^^
@@ -51,7 +51,7 @@ In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
hardware TORCH input.
-LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
+LM3556 torch can be controlled through /sys/class/leds/torch/brightness file.
* if TORCH pin is enabled, below example control brightness only,
and ON / OFF will be controlled by TORCH pin.
@@ -59,22 +59,22 @@ Torch Example:
OFF::
- #echo 0 > sys/class/leds/torch/brightness
+ #echo 0 > /sys/class/leds/torch/brightness
46.88 mA::
- #echo 1 > sys/class/leds/torch/brightness
+ #echo 1 > /sys/class/leds/torch/brightness
...
375 mA::
- #echo 8 > sys/class/leds/torch/brightness
+ #echo 8 > /sys/class/leds/torch/brightness
Indicator Mode
^^^^^^^^^^^^^^
-Indicator pattern can be set through sys/class/leds/indicator/pattern file,
+Indicator pattern can be set through /sys/class/leds/indicator/pattern file,
and 4 patterns are pre-defined in indicator_pattern array.
According to N-lank, Pulse time and N Period values, different pattern wiill
@@ -87,13 +87,13 @@ Indicator pattern example:
pattern 0::
- #echo 0 > sys/class/leds/indicator/pattern
+ #echo 0 > /sys/class/leds/indicator/pattern
...
pattern 3::
- #echo 3 > sys/class/leds/indicator/pattern
+ #echo 3 > /sys/class/leds/indicator/pattern
Indicator brightness can be controlled through
sys/class/leds/indicator/brightness file.
@@ -102,17 +102,17 @@ Example:
OFF::
- #echo 0 > sys/class/leds/indicator/brightness
+ #echo 0 > /sys/class/leds/indicator/brightness
5.86 mA::
- #echo 1 > sys/class/leds/indicator/brightness
+ #echo 1 > /sys/class/leds/indicator/brightness
...
46.875mA::
- #echo 8 > sys/class/leds/indicator/brightness
+ #echo 8 > /sys/class/leds/indicator/brightness
Notes
-----
--
2.25.1
Powered by blists - more mailing lists