linux-kernel - [PATCH v3 3/4] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1617002411-9015-3-git-send-email-chunfeng.yun@mediatek.com>
Date:   Mon, 29 Mar 2021 15:20:10 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mathias Nyman <mathias.nyman@...el.com>
CC:     Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <linux-usb@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Eddie Hung <eddie.hung@...iatek.com>,
        Nicolas Boichat <drinkcat@...omium.org>
Subject: [PATCH v3 3/4] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v2~3: no changes
---
 drivers/usb/host/xhci-mtk.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c1bc40289833..4e3d53cc24f4 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 	if (mtk->lpm_support)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	/*
+	 * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
+	 * and it's 3 when support it.
+	 */
+	if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
 }
 
 /* called during probe() after chip reset completes */
@@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	if (ret)
 		goto put_usb3_hcd;
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
 		xhci->shared_hcd->can_do_streams = 1;
 
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
-- 
2.18.0