| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210329075635.365861689@linuxfoundation.org>
Date: Mon, 29 Mar 2021 09:58:38 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Robert Hancock <robert.hancock@...ian.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 187/221] net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616S
From: Robert Hancock <robert.hancock@...ian.com>
[ Upstream commit 3afd0218992a8d1398e9791d6c2edd4c948ae7ee ]
The default configuration for the BCM54616S PHY may not match the desired
mode when using 1000BaseX or SGMII interface modes, such as when it is on
an SFP module. Add code to explicitly set the correct mode using
programming sequences provided by Bel-Fuse:
https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf
https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf
Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
Acked-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/phy/broadcom.c | 84 ++++++++++++++++++++++++++++++++------
include/linux/brcmphy.h | 4 ++
2 files changed, 76 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 88e9708e0562..6f6e64f81924 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -103,6 +103,64 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm54616s_config_init(struct phy_device *phydev)
+{
+ int rc, val;
+
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_1000BASEX)
+ return 0;
+
+ /* Ensure proper interface mode is selected. */
+ /* Disable RGMII mode */
+ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ if (val < 0)
+ return val;
+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN;
+ val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+ rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+ val);
+ if (rc < 0)
+ return rc;
+
+ /* Select 1000BASE-X register set (primary SerDes) */
+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
+ if (val < 0)
+ return val;
+ val |= BCM54XX_SHD_MODE_1000BX;
+ rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+ if (rc < 0)
+ return rc;
+
+ /* Power down SerDes interface */
+ rc = phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
+ if (rc < 0)
+ return rc;
+
+ /* Select proper interface mode */
+ val &= ~BCM54XX_SHD_INTF_SEL_MASK;
+ val |= phydev->interface == PHY_INTERFACE_MODE_SGMII ?
+ BCM54XX_SHD_INTF_SEL_SGMII :
+ BCM54XX_SHD_INTF_SEL_GBIC;
+ rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+ if (rc < 0)
+ return rc;
+
+ /* Power up SerDes interface */
+ rc = phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+ if (rc < 0)
+ return rc;
+
+ /* Select copper register set */
+ val &= ~BCM54XX_SHD_MODE_1000BX;
+ rc = bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, val);
+ if (rc < 0)
+ return rc;
+
+ /* Power up copper interface */
+ return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+}
+
/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
static int bcm50610_a0_workaround(struct phy_device *phydev)
{
@@ -281,15 +339,17 @@ static int bcm54xx_config_init(struct phy_device *phydev)
bcm54xx_adjust_rxrefclk(phydev);
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
+ switch (BRCM_PHY_MODEL(phydev)) {
+ case PHY_ID_BCM54210E:
err = bcm54210e_config_init(phydev);
- if (err)
- return err;
- } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
+ break;
+ case PHY_ID_BCM54612E:
err = bcm54612e_config_init(phydev);
- if (err)
- return err;
- } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
+ break;
+ case PHY_ID_BCM54616S:
+ err = bcm54616s_config_init(phydev);
+ break;
+ case PHY_ID_BCM54810:
/* For BCM54810, we need to disable BroadR-Reach function */
val = bcm_phy_read_exp(phydev,
BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
@@ -297,9 +357,10 @@ static int bcm54xx_config_init(struct phy_device *phydev)
err = bcm_phy_write_exp(phydev,
BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
val);
- if (err < 0)
- return err;
+ break;
}
+ if (err)
+ return err;
bcm54xx_phydsp_config(phydev);
@@ -478,7 +539,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
static int bcm54616s_probe(struct phy_device *phydev)
{
- int val, intf_sel;
+ int val;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
if (val < 0)
@@ -490,8 +551,7 @@ static int bcm54616s_probe(struct phy_device *phydev)
* RGMII-1000Base-X is properly supported, but RGMII-100Base-FX
* support is still missing as of now.
*/
- intf_sel = (val & BCM54XX_SHD_INTF_SEL_MASK) >> 1;
- if (intf_sel == 1) {
+ if ((val & BCM54XX_SHD_INTF_SEL_MASK) == BCM54XX_SHD_INTF_SEL_RGMII) {
val = bcm_phy_read_shadow(phydev, BCM54616S_SHD_100FX_CTRL);
if (val < 0)
return val;
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index d0bd226d6bd9..54665952d6ad 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -136,6 +136,7 @@
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100
#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
@@ -222,6 +223,9 @@
/* 11111: Mode Control Register */
#define BCM54XX_SHD_MODE 0x1f
#define BCM54XX_SHD_INTF_SEL_MASK GENMASK(2, 1) /* INTERF_SEL[1:0] */
+#define BCM54XX_SHD_INTF_SEL_RGMII 0x02
+#define BCM54XX_SHD_INTF_SEL_SGMII 0x04
+#define BCM54XX_SHD_INTF_SEL_GBIC 0x06
#define BCM54XX_SHD_MODE_1000BX BIT(0) /* Enable 1000-X registers */
/*
--
2.30.1
Powered by blists - more mailing lists