[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210329075634.004206230@linuxfoundation.org>
Date: Mon, 29 Mar 2021 09:55:42 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Alex Marginean <alexandru.marginean@....com>,
Claudiu Manoil <claudiu.manoil@....com>,
Jason Liu <jason.hui.liu@....com>,
Vladimir Oltean <vladimir.oltean@....com>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.11 026/254] net: enetc: set MAC RX FIFO to recommended value
From: Alex Marginean <alexandru.marginean@....com>
[ Upstream commit 1b2395dfff5bb40228a187f21f577cd90673d344 ]
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@....com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@....com>
Reviewed-by: Jason Liu <jason.hui.liu@....com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 ++
drivers/net/ethernet/freescale/enetc/enetc_pf.c | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index de0d20b0f489..00938f7960a4 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -234,6 +234,8 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_PM0_MAXFRM 0x8014
#define ENETC_SET_TX_MTU(val) ((val) << 16)
#define ENETC_SET_MAXFRM(val) ((val) & 0xffff)
+#define ENETC_PM0_RX_FIFO 0x801c
+#define ENETC_PM0_RX_FIFO_VAL 1
#define ENETC_PM_IMDIO_BASE 0x8030
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index ca02f033bea2..224fc37a6757 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -490,6 +490,12 @@ static void enetc_configure_port_mac(struct enetc_hw *hw)
enetc_port_wr(hw, ENETC_PM1_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN |
ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC);
+
+ /* On LS1028A, the MAC RX FIFO defaults to 2, which is too high
+ * and may lead to RX lock-up under traffic. Set it to 1 instead,
+ * as recommended by the hardware team.
+ */
+ enetc_port_wr(hw, ENETC_PM0_RX_FIFO, ENETC_PM0_RX_FIFO_VAL);
}
static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode)
--
2.30.1
Powered by blists - more mailing lists