| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210330230445.26619-6-digetx@gmail.com>
Date: Wed, 31 Mar 2021 02:04:44 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-tegra@...r.kernel.org
Subject: [PATCH v2 5/6] dt-bindings: memory: tegra20: emc: Convert to schema
Convert Tegra20 External Memory Controller binding to schema.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
.../memory-controllers/nvidia,tegra20-emc.txt | 130 --------
.../nvidia,tegra20-emc.yaml | 294 ++++++++++++++++++
2 files changed, 294 insertions(+), 130 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
deleted file mode 100644
index d2250498c36d..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-Embedded Memory Controller
-
-Properties:
-- name : Should be emc
-- #address-cells : Should be 1
-- #size-cells : Should be 0
-- compatible : Should contain "nvidia,tegra20-emc".
-- reg : Offset and length of the register set for the device
-- nvidia,use-ram-code : If present, the sub-nodes will be addressed
- and chosen using the ramcode board selector. If omitted, only one
- set of tables can be present and said tables will be used
- irrespective of ram-code configuration.
-- interrupts : Should contain EMC General interrupt.
-- clocks : Should contain EMC clock.
-- nvidia,memory-controller : Phandle of the Memory Controller node.
-- #interconnect-cells : Should be 0.
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: One bitfield indicating SoC process ID mask
-
- A bitwise AND is performed against this value and if any bit
- matches, the OPP gets enabled.
-
-Optional properties:
-- power-domains: Phandle of the SoC "core" power domain.
-
-Child device nodes describe the memory settings for different configurations and clock rates.
-
-Example:
-
- opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp@...00000 {
- opp-microvolt = <950000 950000 1300000>;
- opp-hz = /bits/ 64 <36000000>;
- };
- ...
- };
-
- memory-controller@...0f400 {
- #address-cells = < 1 >;
- #size-cells = < 0 >;
- #interconnect-cells = <0>;
- compatible = "nvidia,tegra20-emc";
- reg = <0x7000f400 0x400>;
- interrupts = <0 78 0x04>;
- clocks = <&tegra_car TEGRA20_CLK_EMC>;
- nvidia,memory-controller = <&mc>;
- power-domains = <&domain>;
- operating-points-v2 = <&opp_table>;
- }
-
-
-Embedded Memory Controller ram-code table
-
-If the emc node has the nvidia,use-ram-code property present, then the
-next level of nodes below the emc table are used to specify which settings
-apply for which ram-code settings.
-
-If the emc node lacks the nvidia,use-ram-code property, this level is omitted
-and the tables are stored directly under the emc node (see below).
-
-Properties:
-
-- name : Should be emc-tables
-- nvidia,ram-code : the binary representation of the ram-code board strappings
- for which this node (and children) are valid.
-
-
-
-Embedded Memory Controller configuration table
-
-This is a table containing the EMC register settings for the various
-operating speeds of the memory controller. They are always located as
-subnodes of the emc controller node.
-
-There are two ways of specifying which tables to use:
-
-* The simplest is if there is just one set of tables in the device tree,
- and they will always be used (based on which frequency is used).
- This is the preferred method, especially when firmware can fill in
- this information based on the specific system information and just
- pass it on to the kernel.
-
-* The slightly more complex one is when more than one memory configuration
- might exist on the system. The Tegra20 platform handles this during
- early boot by selecting one out of possible 4 memory settings based
- on a 2-pin "ram code" bootstrap setting on the board. The values of
- these strappings can be read through a register in the SoC, and thus
- used to select which tables to use.
-
-Properties:
-- name : Should be emc-table
-- compatible : Should contain "nvidia,tegra20-emc-table".
-- reg : either an opaque enumerator to tell different tables apart, or
- the valid frequency for which the table should be used (in kHz).
-- clock-frequency : the clock frequency for the EMC at which this
- table should be used (in kHz).
-- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
- for operation at the 'clock-frequency' setting.
- The order and contents of the registers are:
- RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
- WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
- PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
- TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
- ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
- ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
- CFG_CLKTRIM_1, CFG_CLKTRIM_2
-
- emc-table@...000 {
- reg = <166000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 166000 >;
- nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 >;
- };
-
- emc-table@...000 {
- reg = <333000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 333000 >;
- nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 >;
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
new file mode 100644
index 000000000000..f25264cd9217
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC External Memory Controller
+
+maintainers:
+ - Dmitry Osipenko <digetx@...il.com>
+ - Jon Hunter <jonathanh@...dia.com>
+ - Thierry Reding <thierry.reding@...il.com>
+
+description: |
+ The External Memory Controller (EMC) interfaces with the off-chip SDRAM to
+ service the request stream sent from Memory Controller. The EMC also has
+ various performance-affecting settings beyond the obvious SDRAM configuration
+ parameters and initialization settings. Tegra20 EMC supports multiple JEDEC
+ standard protocols: DDR1, LPDDR2 and DDR2.
+
+properties:
+ compatible:
+ const: nvidia,tegra20-emc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#interconnect-cells":
+ const: 0
+
+ nvidia,memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle of the Memory Controller node.
+
+ power-domains:
+ maxItems: 1
+ description:
+ Phandle of the SoC "core" power domain.
+
+ operating-points-v2:
+ description:
+ Should contain freqs and voltages and opp-supported-hw property, which
+ is a bitfield indicating SoC process ID mask.
+
+ nvidia,use-ram-code:
+ type: boolean
+ description:
+ If present, the emc-tables@ sub-nodes will be addressed.
+
+patternProperties:
+ "^emc-table@[0-9]+$":
+ type: object
+ properties:
+ compatible:
+ const: nvidia,tegra20-emc-table
+
+ clock-frequency:
+ description:
+ Memory clock rate in kHz.
+ minimum: 1000
+ maximum: 900000
+
+ reg:
+ maxItems: 1
+ description:
+ Either an opaque enumerator to tell different tables apart, or
+ the valid frequency for which the table should be used (in kHz).
+
+ nvidia,emc-registers:
+ description:
+ EMC timing characterization data. These are the registers
+ (see section "15.4.1 EMC Registers" in the TRM) whose values
+ need to be specified, according to the board documentation.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: EMC_RC
+ - description: EMC_RFC
+ - description: EMC_RAS
+ - description: EMC_RP
+ - description: EMC_R2W
+ - description: EMC_W2R
+ - description: EMC_R2P
+ - description: EMC_W2P
+ - description: EMC_RD_RCD
+ - description: EMC_WR_RCD
+ - description: EMC_RRD
+ - description: EMC_REXT
+ - description: EMC_WDV
+ - description: EMC_QUSE
+ - description: EMC_QRST
+ - description: EMC_QSAFE
+ - description: EMC_RDV
+ - description: EMC_REFRESH
+ - description: EMC_BURST_REFRESH_NUM
+ - description: EMC_PDEX2WR
+ - description: EMC_PDEX2RD
+ - description: EMC_PCHG2PDEN
+ - description: EMC_ACT2PDEN
+ - description: EMC_AR2PDEN
+ - description: EMC_RW2PDEN
+ - description: EMC_TXSR
+ - description: EMC_TCKE
+ - description: EMC_TFAW
+ - description: EMC_TRPAB
+ - description: EMC_TCLKSTABLE
+ - description: EMC_TCLKSTOP
+ - description: EMC_TREFBW
+ - description: EMC_QUSE_EXTRA
+ - description: EMC_FBIO_CFG6
+ - description: EMC_ODT_WRITE
+ - description: EMC_ODT_READ
+ - description: EMC_FBIO_CFG5
+ - description: EMC_CFG_DIG_DLL
+ - description: EMC_DLL_XFORM_DQS
+ - description: EMC_DLL_XFORM_QUSE
+ - description: EMC_ZCAL_REF_CNT
+ - description: EMC_ZCAL_WAIT_CNT
+ - description: EMC_AUTO_CAL_INTERVAL
+ - description: EMC_CFG_CLKTRIM_0
+ - description: EMC_CFG_CLKTRIM_1
+ - description: EMC_CFG_CLKTRIM_2
+
+ required:
+ - clock-frequency
+ - compatible
+ - reg
+ - nvidia,emc-registers
+
+ additionalProperties: false
+
+ "^emc-tables@[a-z0-9-]+$":
+ type: object
+ properties:
+ nvidia,ram-code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Value of RAM_CODE this timing set is used for.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^emc-table@[0-9]+$":
+ type: object
+ properties:
+ compatible:
+ const: nvidia,tegra20-emc-table
+
+ clock-frequency:
+ description:
+ Memory clock rate in kHz.
+ minimum: 1000
+ maximum: 900000
+
+ reg:
+ maxItems: 1
+ description:
+ Either an opaque enumerator to tell different tables apart, or
+ the valid frequency for which the table should be used (in kHz).
+
+ nvidia,emc-registers:
+ description:
+ EMC timing characterization data. These are the registers
+ (see section "15.4.1 EMC Registers" in the TRM) whose values
+ need to be specified, according to the board documentation.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: EMC_RC
+ - description: EMC_RFC
+ - description: EMC_RAS
+ - description: EMC_RP
+ - description: EMC_R2W
+ - description: EMC_W2R
+ - description: EMC_R2P
+ - description: EMC_W2P
+ - description: EMC_RD_RCD
+ - description: EMC_WR_RCD
+ - description: EMC_RRD
+ - description: EMC_REXT
+ - description: EMC_WDV
+ - description: EMC_QUSE
+ - description: EMC_QRST
+ - description: EMC_QSAFE
+ - description: EMC_RDV
+ - description: EMC_REFRESH
+ - description: EMC_BURST_REFRESH_NUM
+ - description: EMC_PDEX2WR
+ - description: EMC_PDEX2RD
+ - description: EMC_PCHG2PDEN
+ - description: EMC_ACT2PDEN
+ - description: EMC_AR2PDEN
+ - description: EMC_RW2PDEN
+ - description: EMC_TXSR
+ - description: EMC_TCKE
+ - description: EMC_TFAW
+ - description: EMC_TRPAB
+ - description: EMC_TCLKSTABLE
+ - description: EMC_TCLKSTOP
+ - description: EMC_TREFBW
+ - description: EMC_QUSE_EXTRA
+ - description: EMC_FBIO_CFG6
+ - description: EMC_ODT_WRITE
+ - description: EMC_ODT_READ
+ - description: EMC_FBIO_CFG5
+ - description: EMC_CFG_DIG_DLL
+ - description: EMC_DLL_XFORM_DQS
+ - description: EMC_DLL_XFORM_QUSE
+ - description: EMC_ZCAL_REF_CNT
+ - description: EMC_ZCAL_WAIT_CNT
+ - description: EMC_AUTO_CAL_INTERVAL
+ - description: EMC_CFG_CLKTRIM_0
+ - description: EMC_CFG_CLKTRIM_1
+ - description: EMC_CFG_CLKTRIM_2
+
+ required:
+ - clock-frequency
+ - compatible
+ - reg
+ - nvidia,emc-registers
+
+ additionalProperties: false
+
+ required:
+ - nvidia,ram-code
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - nvidia,memory-controller
+ - "#interconnect-cells"
+ - operating-points-v2
+
+additionalProperties: false
+
+examples:
+ - |
+ external-memory-controller@...0f400 {
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x400>;
+ interrupts = <0 78 4>;
+ clocks = <&clock_controller 57>;
+
+ nvidia,memory-controller = <&mc>;
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
+
+ #interconnect-cells = <0>;
+
+ nvidia,use-ram-code;
+
+ emc-tables@0 {
+ nvidia,ram-code = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ emc-table@...000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <333000>;
+ nvidia,emc-registers = <0x00000018 0x00000033
+ 0x00000012 0x00000004 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000bff
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x00000008
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xf0440303
+ 0x007fe010 0x00001414 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ };
+ };
--
2.30.2
Powered by blists - more mailing lists