| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL9mu0+CB4Tp_Ar_oqi0rFAx0cOf7SPRzv8zjCshKLiydLK4-Q@mail.gmail.com>
Date: Wed, 31 Mar 2021 07:06:06 +0800
From: dillon min <dillon.minfei@...il.com>
To: Alexandre TORGUE <alexandre.torgue@...s.st.com>
Cc: Rob Herring <robh@...nel.org>,
Valentin CARON - foss <valentin.caron@...s.st.com>,
rong.a.chen@...el.com, Ahmad Fatoum <a.fatoum@...gutronix.de>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-stm32@...md-mailman.stormreply.com,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux@...linux.org.uk, afzal.mohd.ma@...il.com,
gregkh@...uxfoundation.org,
Erwan LE-RAY - foss <erwan.leray@...s.st.com>,
Erwan LE RAY <erwan.leray@...com>,
linux-serial@...r.kernel.org, lkp@...el.com,
Patrice CHOTARD <patrice.chotard@...s.st.com>
Subject: Re: [PATCH v8 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to
support stm32h750
On Wed, Mar 31, 2021 at 12:44 AM Alexandre TORGUE
<alexandre.torgue@...s.st.com> wrote:
>
>
>
> On 3/30/21 10:58 AM, dillon.minfei@...il.com wrote:
> > From: dillon min <dillon.minfei@...il.com>
> >
> > This patch is intend to add support stm32h750 value line,
> > just add stm32h7-pinctrl.dtsi for extending, with following changes:
> >
> > - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
> > - update stm32h743i-{dico/eval}.dtsi to include stm32h7-pinctrl.dtsi
> > - add dts binding usart3, uart4
> > usart3/uart4 pinctrl in stm32h7-pinctrl.dtsi
> > usart3/uart4 register in stm32h743.dtsi
> > - add dts binding sdmmc2
> > sdmmc2 pinctrl in stm32h7-pinctrl.dtsi
> > sdmmc2 register in stm32h743.dtsi
> > - add spi1_pins pinctrl in stm32h7-pinctrl.dtsi
> > - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi, to
> > fix make dtbs_check warrnings
> > arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@...05C00',
> > 'i2c@...01C00' do not match any of the regexes:
> > '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'
> >
> > Signed-off-by: dillon min <dillon.minfei@...il.com>
> > ---
> > v8:
> > - drop '[PATCH v7 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to
> > support stm32h750' - stm32h743-pinctrl.dtsi file
> > - move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi
> > to stm32h743.dtsi
> > - update stm32h743i-{dico/eval}.dtsi to include stm32h7-pinctrl.dtsi
> > - move file stm32h743.dtsi submit position to [PATCH V8 3/6]
> >
> > arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 306 ---------------------------
> > arch/arm/boot/dts/stm32h743.dtsi | 165 ++++++++++++++-
> > arch/arm/boot/dts/stm32h743i-disco.dts | 2 +-
> > arch/arm/boot/dts/stm32h743i-eval.dts | 2 +-
> > 5 files changed, 506 insertions(+), 310 deletions(-)
> > create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
> > delete mode 100644 arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> >
> > diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
> > new file mode 100644
> > index 000000000000..a5c295eca081
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
> > @@ -0,0 +1,341 @@
> > +/*
> > + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@...com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +#include <dt-bindings/pinctrl/stm32-pinfunc.h>
> > +
> > +&pinctrl {
> > +
> > + gpioa: gpio@...20000 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 0 16>;
> > + };
> > +
>
> You could move those entries directly into stm32h743.dtsi no ?
Agree, will add this change to v9.
thanks.
>
> > + gpiob: gpio@...20400 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 16 16>;
> > + };
> > +
> > + gpioc: gpio@...20800 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 32 16>;
> > + };
> > +
> > + gpiod: gpio@...20c00 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 48 16>;
> > + };
> > +
> > + gpioe: gpio@...21000 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 64 16>;
> > + };
> > +
> > + gpiof: gpio@...21400 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 80 16>;
> > + };
> > +
> > + gpiog: gpio@...21800 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 96 16>;
> > + };
> > +
> > + gpioh: gpio@...21c00 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 112 16>;
> > + };
> > +
> > + gpioi: gpio@...22000 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 128 16>;
> > + };
> > +
> > + gpioj: gpio@...22400 {
> > + status = "okay";
> > + ngpios = <16>;
> > + gpio-ranges = <&pinctrl 0 144 16>;
> > + };
> > +
> > + gpiok: gpio@...22800 {
> > + status = "okay";
> > + ngpios = <8>;
> > + gpio-ranges = <&pinctrl 0 160 8>;
> > + };
> > +
> > + i2c1_pins_a: i2c1-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
> > + <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
> > + bias-disable;
> > + drive-open-drain;
> > + slew-rate = <0>;
> > + };
> > + };
> > +
> > + ethernet_rmii: rmii-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('G', 11, AF11)>,
> > + <STM32_PINMUX('G', 13, AF11)>,
> > + <STM32_PINMUX('G', 12, AF11)>,
> > + <STM32_PINMUX('C', 4, AF11)>,
> > + <STM32_PINMUX('C', 5, AF11)>,
> > + <STM32_PINMUX('A', 7, AF11)>,
> > + <STM32_PINMUX('C', 1, AF11)>,
> > + <STM32_PINMUX('A', 2, AF11)>,
> > + <STM32_PINMUX('A', 1, AF11)>;
> > + slew-rate = <2>;
> > + };
> > + };
> > +
> > + sdmmc1_b4_pins_a: sdmmc1-b4-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> > + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
> > + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> > + slew-rate = <3>;
> > + drive-push-pull;
> > + bias-disable;
> > + };
> > + };
> > +
> > + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> > + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
> > + slew-rate = <3>;
> > + drive-push-pull;
> > + bias-disable;
> > + };
> > + pins2{
> > + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> > + slew-rate = <3>;
> > + drive-open-drain;
> > + bias-disable;
> > + };
> > + };
> > +
> > + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
> > + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
> > + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
> > + };
> > + };
> > +
> > + sdmmc2_b4_pins_a: sdmmc2-b4-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
> > + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
> > + <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
> > + slew-rate = <3>;
> > + drive-push-pull;
> > + bias-disable;
> > + };
> > + };
> > +
> > + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
> > + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
> > + slew-rate = <3>;
> > + drive-push-pull;
> > + bias-disable;
> > + };
> > + pins2{
> > + pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
> > + slew-rate = <3>;
> > + drive-open-drain;
> > + bias-disable;
> > + };
> > + };
> > +
> > + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
> > + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
> > + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
> > + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
> > + <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
> > + <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
> > + };
> > + };
> > +
> > + sdmmc1_dir_pins_a: sdmmc1-dir-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
> > + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
> > + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
> > + slew-rate = <3>;
> > + drive-push-pull;
> > + bias-pull-up;
> > + };
> > + pins2{
> > + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
> > + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
> > + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
> > + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
> > + };
> > + };
> > +
> > + usart1_pins: usart1-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <0>;
> > + };
> > + pins2 {
> > + pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
> > + bias-disable;
> > + };
> > + };
> > +
> > + usart2_pins: usart2-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <0>;
> > + };
> > + pins2 {
> > + pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
> > + bias-disable;
> > + };
> > + };
> > +
> > + usart3_pins: usart3-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
> > + <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <0>;
> > + };
> > + pins2 {
> > + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
> > + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
> > + bias-disable;
> > + };
> > + };
> > +
> > + uart4_pins: uart4-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <0>;
> > + };
> > + pins2 {
> > + pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
> > + bias-disable;
> > + };
> > + };
> > +
> > + usbotg_hs_pins_a: usbotg-hs-0 {
> > + pins {
> > + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
> > + <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
> > + <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
> > + <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
> > + <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
> > + <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
> > + <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
> > + <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
> > + <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
> > + <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
> > + <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
> > + <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <2>;
> > + };
> > + };
> > +
> > + spi1_pins: spi1-0 {
> > + pins1 {
> > + pinmux = <STM32_PINMUX('A', 5, AF5)>,
> > + /* SPI1_CLK */
> > + <STM32_PINMUX('B', 5, AF5)>;
> > + /* SPI1_MOSI */
> > + bias-disable;
> > + drive-push-pull;
> > + slew-rate = <2>;
> > + };
> > + pins2 {
> > + pinmux = <STM32_PINMUX('G', 9, AF5)>;
> > + /* SPI1_MISO */
> > + bias-disable;
> > + };
> > + };
> > +};
> > +
> > diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> > deleted file mode 100644
> > index fa5dcb6a5fdd..000000000000
> > --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> > +++ /dev/null
> > @@ -1,306 +0,0 @@
> > -/*
> > - * Copyright 2017 - Alexandre Torgue <alexandre.torgue@...com>
> > - *
> > - * This file is dual-licensed: you can use it either under the terms
> > - * of the GPL or the X11 license, at your option. Note that this dual
> > - * licensing only applies to this file, and not this project as a
> > - * whole.
> > - *
> > - * a) This file is free software; you can redistribute it and/or
> > - * modify it under the terms of the GNU General Public License as
> > - * published by the Free Software Foundation; either version 2 of the
> > - * License, or (at your option) any later version.
> > - *
> > - * This file is distributed in the hope that it will be useful,
> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > - * GNU General Public License for more details.
> > - *
> > - * Or, alternatively,
> > - *
> > - * b) Permission is hereby granted, free of charge, to any person
> > - * obtaining a copy of this software and associated documentation
> > - * files (the "Software"), to deal in the Software without
> > - * restriction, including without limitation the rights to use,
> > - * copy, modify, merge, publish, distribute, sublicense, and/or
> > - * sell copies of the Software, and to permit persons to whom the
> > - * Software is furnished to do so, subject to the following
> > - * conditions:
> > - *
> > - * The above copyright notice and this permission notice shall be
> > - * included in all copies or substantial portions of the Software.
> > - *
> > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > - * OTHER DEALINGS IN THE SOFTWARE.
> > - */
> > -
> > -#include <dt-bindings/pinctrl/stm32-pinfunc.h>
> > -
> > -/ {
> > - soc {
> > - pin-controller {
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - compatible = "st,stm32h743-pinctrl";
> > - ranges = <0 0x58020000 0x3000>;
> > - interrupt-parent = <&exti>;
> > - st,syscfg = <&syscfg 0x8>;
> > - pins-are-numbered;
> > -
> > - gpioa: gpio@...20000 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x0 0x400>;
> > - clocks = <&rcc GPIOA_CK>;
> > - st,bank-name = "GPIOA";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpiob: gpio@...20400 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x400 0x400>;
> > - clocks = <&rcc GPIOB_CK>;
> > - st,bank-name = "GPIOB";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpioc: gpio@...20800 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x800 0x400>;
> > - clocks = <&rcc GPIOC_CK>;
> > - st,bank-name = "GPIOC";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpiod: gpio@...20c00 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0xc00 0x400>;
> > - clocks = <&rcc GPIOD_CK>;
> > - st,bank-name = "GPIOD";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpioe: gpio@...21000 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x1000 0x400>;
> > - clocks = <&rcc GPIOE_CK>;
> > - st,bank-name = "GPIOE";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpiof: gpio@...21400 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x1400 0x400>;
> > - clocks = <&rcc GPIOF_CK>;
> > - st,bank-name = "GPIOF";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpiog: gpio@...21800 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x1800 0x400>;
> > - clocks = <&rcc GPIOG_CK>;
> > - st,bank-name = "GPIOG";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpioh: gpio@...21c00 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x1c00 0x400>;
> > - clocks = <&rcc GPIOH_CK>;
> > - st,bank-name = "GPIOH";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpioi: gpio@...22000 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x2000 0x400>;
> > - clocks = <&rcc GPIOI_CK>;
> > - st,bank-name = "GPIOI";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpioj: gpio@...22400 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x2400 0x400>;
> > - clocks = <&rcc GPIOJ_CK>;
> > - st,bank-name = "GPIOJ";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - gpiok: gpio@...22800 {
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - reg = <0x2800 0x400>;
> > - clocks = <&rcc GPIOK_CK>;
> > - st,bank-name = "GPIOK";
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - };
> > -
> > - i2c1_pins_a: i2c1-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
> > - <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
> > - bias-disable;
> > - drive-open-drain;
> > - slew-rate = <0>;
> > - };
> > - };
> > -
> > - ethernet_rmii: rmii-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('G', 11, AF11)>,
> > - <STM32_PINMUX('G', 13, AF11)>,
> > - <STM32_PINMUX('G', 12, AF11)>,
> > - <STM32_PINMUX('C', 4, AF11)>,
> > - <STM32_PINMUX('C', 5, AF11)>,
> > - <STM32_PINMUX('A', 7, AF11)>,
> > - <STM32_PINMUX('C', 1, AF11)>,
> > - <STM32_PINMUX('A', 2, AF11)>,
> > - <STM32_PINMUX('A', 1, AF11)>;
> > - slew-rate = <2>;
> > - };
> > - };
> > -
> > - sdmmc1_b4_pins_a: sdmmc1-b4-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> > - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> > - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> > - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> > - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
> > - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> > - slew-rate = <3>;
> > - drive-push-pull;
> > - bias-disable;
> > - };
> > - };
> > -
> > - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
> > - pins1 {
> > - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> > - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> > - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> > - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> > - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
> > - slew-rate = <3>;
> > - drive-push-pull;
> > - bias-disable;
> > - };
> > - pins2{
> > - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> > - slew-rate = <3>;
> > - drive-open-drain;
> > - bias-disable;
> > - };
> > - };
> > -
> > - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
> > - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
> > - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
> > - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
> > - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
> > - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
> > - };
> > - };
> > -
> > - sdmmc1_dir_pins_a: sdmmc1-dir-0 {
> > - pins1 {
> > - pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
> > - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
> > - <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
> > - slew-rate = <3>;
> > - drive-push-pull;
> > - bias-pull-up;
> > - };
> > - pins2{
> > - pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
> > - bias-pull-up;
> > - };
> > - };
> > -
> > - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
> > - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
> > - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
> > - <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
> > - };
> > - };
> > -
> > - usart1_pins: usart1-0 {
> > - pins1 {
> > - pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
> > - bias-disable;
> > - drive-push-pull;
> > - slew-rate = <0>;
> > - };
> > - pins2 {
> > - pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
> > - bias-disable;
> > - };
> > - };
> > -
> > - usart2_pins: usart2-0 {
> > - pins1 {
> > - pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
> > - bias-disable;
> > - drive-push-pull;
> > - slew-rate = <0>;
> > - };
> > - pins2 {
> > - pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
> > - bias-disable;
> > - };
> > - };
> > -
> > - usbotg_hs_pins_a: usbotg-hs-0 {
> > - pins {
> > - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
> > - <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
> > - <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
> > - <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
> > - <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
> > - <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
> > - <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
> > - <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
> > - <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
> > - <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
> > - <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
> > - <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
> > - bias-disable;
> > - drive-push-pull;
> > - slew-rate = <2>;
> > - };
> > - };
> > - };
> > - };
> > -};
> > diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
> > index 4ebffb0a45a3..b58cae967b2a 100644
> > --- a/arch/arm/boot/dts/stm32h743.dtsi
> > +++ b/arch/arm/boot/dts/stm32h743.dtsi
> > @@ -135,6 +135,22 @@
> > clocks = <&rcc USART2_CK>;
> > };
> >
> > + usart3: serial@...04800 {
> > + compatible = "st,stm32h7-uart";
> > + reg = <0x40004800 0x400>;
> > + interrupts = <39>;
> > + status = "disabled";
> > + clocks = <&rcc USART3_CK>;
> > + };
> > +
> > + uart4: serial@...04c00 {
> > + compatible = "st,stm32h7-uart";
> > + reg = <0x40004c00 0x400>;
> > + interrupts = <52>;
> > + status = "disabled";
> > + clocks = <&rcc UART4_CK>;
> > + };
> > +
> > i2c1: i2c@...05400 {
> > compatible = "st,stm32f7-i2c";
> > #address-cells = <1>;
> > @@ -159,7 +175,7 @@
> > status = "disabled";
> > };
> >
> > - i2c3: i2c@...05C00 {
> > + i2c3: i2c@...05c00 {
> > compatible = "st,stm32f7-i2c";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > @@ -368,6 +384,20 @@
> > max-frequency = <120000000>;
> > };
> >
> > + sdmmc2: mmc@...22400 {
> > + compatible = "arm,pl18x", "arm,primecell";
> > + arm,primecell-periphid = <0x10153180>;
> > + reg = <0x48022400 0x400>;
> > + interrupts = <124>;
> > + interrupt-names = "cmd_irq";
> > + clocks = <&rcc SDMMC2_CK>;
> > + clock-names = "apb_pclk";
> > + resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
> > + cap-sd-highspeed;
> > + cap-mmc-highspeed;
> > + max-frequency = <120000000>;
> > + };
> > +
> > exti: interrupt-controller@...00000 {
> > compatible = "st,stm32h7-exti";
> > interrupt-controller;
> > @@ -392,7 +422,7 @@
> > status = "disabled";
> > };
> >
> > - i2c4: i2c@...01C00 {
> > + i2c4: i2c@...01c00 {
> > compatible = "st,stm32f7-i2c";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > @@ -555,6 +585,137 @@
> > snps,pbl = <8>;
> > status = "disabled";
> > };
> > +
> > + pinctrl: pin-controller@...20000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "st,stm32h743-pinctrl";
> > + ranges = <0 0x58020000 0x3000>;
> > + interrupt-parent = <&exti>;
> > + st,syscfg = <&syscfg 0x8>;
> > + pins-are-numbered;
> > +
> > + gpioa: gpio@...20000 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x0 0x400>;
> > + clocks = <&rcc GPIOA_CK>;
> > + st,bank-name = "GPIOA";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpiob: gpio@...20400 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x400 0x400>;
> > + clocks = <&rcc GPIOB_CK>;
> > + st,bank-name = "GPIOB";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpioc: gpio@...20800 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x800 0x400>;
> > + clocks = <&rcc GPIOC_CK>;
> > + st,bank-name = "GPIOC";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpiod: gpio@...20c00 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0xc00 0x400>;
> > + clocks = <&rcc GPIOD_CK>;
> > + st,bank-name = "GPIOD";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpioe: gpio@...21000 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x1000 0x400>;
> > + clocks = <&rcc GPIOE_CK>;
> > + st,bank-name = "GPIOE";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpiof: gpio@...21400 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x1400 0x400>;
> > + clocks = <&rcc GPIOF_CK>;
> > + st,bank-name = "GPIOF";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpiog: gpio@...21800 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x1800 0x400>;
> > + clocks = <&rcc GPIOG_CK>;
> > + st,bank-name = "GPIOG";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpioh: gpio@...21c00 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x1c00 0x400>;
> > + clocks = <&rcc GPIOH_CK>;
> > + st,bank-name = "GPIOH";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpioi: gpio@...22000 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x2000 0x400>;
> > + clocks = <&rcc GPIOI_CK>;
> > + st,bank-name = "GPIOI";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpioj: gpio@...22400 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x2400 0x400>;
> > + clocks = <&rcc GPIOJ_CK>;
> > + st,bank-name = "GPIOJ";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > +
> > + gpiok: gpio@...22800 {
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + reg = <0x2800 0x400>;
> > + clocks = <&rcc GPIOK_CK>;
> > + st,bank-name = "GPIOK";
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + status = "disabled";
> > + };
> > + };
> > };
> > };
> >
> > diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
> > index e446d311c520..59e01ce10318 100644
> > --- a/arch/arm/boot/dts/stm32h743i-disco.dts
> > +++ b/arch/arm/boot/dts/stm32h743i-disco.dts
> > @@ -42,7 +42,7 @@
> >
> > /dts-v1/;
> > #include "stm32h743.dtsi"
> > -#include "stm32h743-pinctrl.dtsi"
> > +#include "stm32h7-pinctrl.dtsi"
> >
> > / {
> > model = "STMicroelectronics STM32H743i-Discovery board";
> > diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
> > index 8f398178f5e5..38cc7faf6884 100644
> > --- a/arch/arm/boot/dts/stm32h743i-eval.dts
> > +++ b/arch/arm/boot/dts/stm32h743i-eval.dts
> > @@ -42,7 +42,7 @@
> >
> > /dts-v1/;
> > #include "stm32h743.dtsi"
> > -#include "stm32h743-pinctrl.dtsi"
> > +#include "stm32h7-pinctrl.dtsi"
> >
> > / {
> > model = "STMicroelectronics STM32H743i-EVAL board";
> >
Powered by blists - more mailing lists