linux-kernel - Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 30 Mar 2021 15:15:16 +0300
From:   Andy Shevchenko <andy.shevchenko@...il.com>
To:     Henning Schild <henning.schild@...mens.com>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Linux LED Subsystem <linux-leds@...r.kernel.org>,
        Platform Driver <platform-driver-x86@...r.kernel.org>,
        linux-watchdog@...r.kernel.org,
        Srikanth Krishnakar <skrishnakar@...il.com>,
        Jan Kiszka <jan.kiszka@...mens.com>,
        Gerd Haeussler <gerd.haeussler.ext@...mens.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Mark Gross <mgross@...ux.intel.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Pavel Machek <pavel@....cz>, Enrico Weigelt <lkml@...ux.net>
Subject: Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens
 Industial PCs

On Tue, Mar 30, 2021 at 2:58 PM Henning Schild
<henning.schild@...mens.com> wrote:
> Am Tue, 30 Mar 2021 14:04:35 +0300
> schrieb Andy Shevchenko <andy.shevchenko@...il.com>:
> > On Mon, Mar 29, 2021 at 8:59 PM Henning Schild
> > <henning.schild@...mens.com> wrote:
> > >
> > > This driver adds initial support for several devices from Siemens.
> > > It is based on a platform driver introduced in an earlier commit.
> >
> > ...
> >
> > > +#define SIMATIC_IPC_LED_PORT_BASE      0x404E
> >
> > > +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> > > +       {1 << 15, "green:" LED_FUNCTION_STATUS "-1" },
> > > +       {1 << 7,  "yellow:" LED_FUNCTION_STATUS "-1" },
> > > +       {1 << 14, "red:" LED_FUNCTION_STATUS "-2" },
> > > +       {1 << 6,  "yellow:" LED_FUNCTION_STATUS "-2" },
> > > +       {1 << 13, "red:" LED_FUNCTION_STATUS "-3" },
> > > +       {1 << 5,  "yellow:" LED_FUNCTION_STATUS "-3" },
> > > +       { }
> > > +};
> >
> > > +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> > > +       {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
> > > +       {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
> > > +       {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
> > > +       {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
> > > +       {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
> > > +       {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
> > > +       { }
> > > +};
> >
> > It seems to me like poking GPIO controller registers directly. This
> > is not good. The question still remains: Can we simply register a
> > GPIO (pin control) driver and use an LED GPIO driver with an
> > additional board file that instantiates it?
>
> I wrote about that in reply to the cover letter. My view is still that
> it would be an abstraction with only one user, just causing work and
> likely not ending up as generic as it might eventually have to be.
>
> The region is reserved, not sure what the problem with the "poking" is.


> Maybe i do not understand all the benefits of such a split at this
> point in time. At the moment i only see work with hardly any benefit,
> not just work for me but also for maintainers. I sure do not mean to be
> ignorant. Maybe you go into details and convince me or we wait for other
> peoples opinions on how to proceed, maybe there is a second user that i
> am not aware of?
> Until i am convinced otherwise i will try to argue that a
> single-user-abstraction is needless work/code, and should be done only
> when actually needed.

I have just read your messages (there is a cover letter and additional
email which was sent lately).

I would like to know what the CPU model number on that board is. Than
we can continue to see what possibilities we have here.

-- 
With Best Regards,
Andy Shevchenko