linux-kernel - [PATCH v3 04/14] PCI: xilinx: Don't allocate extra memory for the MSI capture address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210330151145.997953-5-maz@kernel.org>
Date:   Tue, 30 Mar 2021 16:11:35 +0100
From:   Marc Zyngier <maz@...nel.org>
To:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>
Cc:     Frank Wunderlich <frank-w@...lic-files.de>,
        Thierry Reding <treding@...dia.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Rob Herring <robh@...nel.org>, Will Deacon <will@...nel.org>,
        "K. Y. Srinivasan" <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Stephen Hemminger <sthemmin@...rosoft.com>,
        Michael Kelley <mikelley@...rosoft.com>,
        Wei Liu <wei.liu@...nel.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Ryder Lee <ryder.lee@...iatek.com>,
        Marek Vasut <marek.vasut+renesas@...il.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Michal Simek <michal.simek@...inx.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Bharat Kumar Gogada <bharatku@...inx.com>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-hyperv@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        linux-renesas-soc@...r.kernel.org, kernel-team@...roid.com
Subject: [PATCH v3 04/14] PCI: xilinx: Don't allocate extra memory for the MSI capture address

A long cargo-culted behaviour of PCI drivers is to allocate memory
to obtain an address that is fed to the controller as the MSI
capture address (i.e. the MSI doorbell).

But there is no actual requirement for this address to be RAM.
All it needs to be is a suitable aligned address that will
*not* be DMA'd to.

Use the physical address of the 'port' data structure as the MSI
capture address, aligned on a 4K boundary.

Tested-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Marc Zyngier <maz@...nel.org>
---
 drivers/pci/controller/pcie-xilinx.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c
index fa5baeb82653..e127a7b6e535 100644
--- a/drivers/pci/controller/pcie-xilinx.c
+++ b/drivers/pci/controller/pcie-xilinx.c
@@ -94,7 +94,6 @@
  * struct xilinx_pcie_port - PCIe port information
  * @reg_base: IO Mapped Register Base
  * @irq: Interrupt number
- * @msi_pages: MSI pages
  * @dev: Device pointer
  * @msi_domain: MSI IRQ domain pointer
  * @leg_domain: Legacy IRQ domain pointer
@@ -103,7 +102,6 @@
 struct xilinx_pcie_port {
 	void __iomem *reg_base;
 	u32 irq;
-	unsigned long msi_pages;
 	struct device *dev;
 	struct irq_domain *msi_domain;
 	struct irq_domain *leg_domain;
@@ -274,10 +272,10 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
 
 	irq_set_msi_desc(irq, desc);
 
-	msg_addr = virt_to_phys((void *)port->msi_pages);
+	msg_addr = ALIGN_DOWN(virt_to_phys(port), SZ_4K);
 
-	msg.address_hi = 0;
-	msg.address_lo = msg_addr;
+	msg.address_hi = upper_32_bits(msg_addr);
+	msg.address_lo = lower_32_bits(msg_addr);
 	msg.data = irq;
 
 	pci_write_msi_msg(irq, &msg);
@@ -330,13 +328,9 @@ static int xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
 {
 	phys_addr_t msg_addr;
 
-	port->msi_pages = __get_free_pages(GFP_KERNEL, 0);
-	if (!port->msi_pages)
-		return -ENOMEM;
-
-	msg_addr = virt_to_phys((void *)port->msi_pages);
-	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
-	pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2);
+	msg_addr = ALIGN_DOWN(virt_to_phys(port), SZ_4K);
+	pcie_write(port, upper_32_bits(msg_addr), XILINX_PCIE_REG_MSIBASE1);
+	pcie_write(port, lower_32_bits(msg_addr), XILINX_PCIE_REG_MSIBASE2);
 
 	return 0;
 }
-- 
2.29.2