[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YGRB/42Q6aVBLoAq@vkoul-mobl.Dlink>
Date: Wed, 31 Mar 2021 15:03:51 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Pratyush Yadav <p.yadav@...com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...com>,
Peter Ujfalusi <peter.ujfalusi@...il.com>,
Maxime Ripard <mripard@...nel.org>,
Benoit Parrot <bparrot@...com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Alexandre Courbot <acourbot@...omium.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Stanimir Varbanov <stanimir.varbanov@...aro.org>,
Helen Koike <helen.koike@...labora.com>,
Michael Tretter <m.tretter@...gutronix.de>,
Peter Chen <peter.chen@....com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org,
dmaengine@...r.kernel.org, Vignesh Raghavendra <vigneshr@...com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: Re: [PATCH 00/16] CSI2RX support on J721E
On 30-03-21, 23:03, Pratyush Yadav wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY
> driver, and finally adds the TI CSI2RX wrapper driver.
>
> Tested on TI's J721E with OV5640 sensor.
>
> Paul Kocialkowski (1):
> phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
>
> Pratyush Yadav (15):
> phy: cdns-dphy: Prepare for Rx support
> phy: cdns-dphy: Allow setting mode
> phy: cdns-dphy: Add Rx support
> media: cadence: csi2rx: Add external DPHY support
> media: cadence: csi2rx: Soft reset the streams before starting capture
> media: cadence: csi2rx: Set the STOP bit when stopping a stream
> media: cadence: csi2rx: Fix stream data configuration
> media: cadence: csi2rx: Turn subdev power on before starting stream
> media: cadence: csi2rx: Add wrappers for subdev calls
> dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
> dt-bindings: media: Add DT bindings for TI CSI2RX driver
> media: ti-vpe: csi2rx: Add CSI2RX support
> dt-bindings: phy: Convert Cadence DPHY binding to YAML
> dt-bindings: phy: cdns,dphy: make clocks optional
> dt-bindings: phy: cdns,dphy: add power-domains property
Is there any dependency between patches to various subsystems, if not
please do consider sending a series per subsystem...
Thanks
>
> .../devicetree/bindings/media/ti,csi2rx.yaml | 70 ++
> .../devicetree/bindings/phy/cdns,dphy.txt | 20 -
> .../devicetree/bindings/phy/cdns,dphy.yaml | 52 +
> MAINTAINERS | 7 +
> drivers/dma/ti/k3-psil-j721e.c | 10 +
> drivers/media/platform/Kconfig | 11 +
> drivers/media/platform/cadence/cdns-csi2rx.c | 269 ++++-
> drivers/media/platform/ti-vpe/Makefile | 1 +
> drivers/media/platform/ti-vpe/ti-csi2rx.c | 964 ++++++++++++++++++
> drivers/phy/cadence/cdns-dphy.c | 407 +++++++-
> include/linux/phy/phy-mipi-dphy.h | 13 +
> 11 files changed, 1754 insertions(+), 70 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c
>
> --
> 2.30.0
--
~Vinod
Powered by blists - more mailing lists