lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210331111120.GC15610@work>
Date:   Wed, 31 Mar 2021 16:41:20 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     Bhaumik Bhatt <bbhatt@...eaurora.org>
Cc:     linux-arm-msm@...r.kernel.org, hemantk@...eaurora.org,
        jhugo@...eaurora.org, linux-kernel@...r.kernel.org,
        carl.yin@...ctel.com, naveen.kumar@...ctel.com,
        loic.poulain@...aro.org, abickett@...eaurora.org
Subject: Re: [PATCH v1 4/7] bus: mhi: core: Add support for Flash Programmer
 execution environment

On Mon, Mar 29, 2021 at 06:28:21PM -0700, Bhaumik Bhatt wrote:
> From: Carl Yin <carl.yin@...ctel.com>
> 
> MHI WWAN modems support downloading firmware to NAND or eMMC
> using Firehose protocol with process as follows:
> 1. Modem boots up, enters AMSS execution environment and the
> device later enters EDL (Emergency Download) mode through any
> mechanism host can use such as a diag command.
> 2. Modem enters SYS_ERROR, MHI host handles SYS_ERROR transition.
> 3. EDL image for device to enter 'Flash Programmer' execution
> environment is then flashed via BHI interface from host.
> 4. Modem enters MHI READY -> M0 and sends the Flash Programmer
> execution environment change to host.
> 5. Following that, EDL/FIREHOSE channels (34, 35) are made
> available from the host.
> 6. User space tool for downloading firmware image to modem over
> the EDL channels using Firehose protocol. Link to USB flashing
> tool: https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/
> 
> Make the necessary changes to allow for this sequence to occur and
> allow using the Flash Programmer execution environment.
> 
> Signed-off-by: Carl Yin <carl.yin@...ctel.com>
> Co-developed-by: Bhaumik Bhatt <bbhatt@...eaurora.org>
> Signed-off-by: Bhaumik Bhatt <bbhatt@...eaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/init.c     | 2 ++
>  drivers/bus/mhi/core/internal.h | 1 +
>  drivers/bus/mhi/core/main.c     | 3 +++
>  drivers/bus/mhi/core/pm.c       | 6 ++++++
>  include/linux/mhi.h             | 4 +++-
>  5 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index 706484f..ee67712 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -29,6 +29,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = {
>  	[MHI_EE_WFW] = "WFW",
>  	[MHI_EE_PTHRU] = "PASS THRU",
>  	[MHI_EE_EDL] = "EDL",
> +	[MHI_EE_FP] = "FLASH PROGRAMMER",
>  	[MHI_EE_DISABLE_TRANSITION] = "DISABLE",
>  	[MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
>  };
> @@ -38,6 +39,7 @@ const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
>  	[DEV_ST_TRANSITION_READY] = "READY",
>  	[DEV_ST_TRANSITION_SBL] = "SBL",
>  	[DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
> +	[DEV_ST_TRANSITION_FP] = "FLASH_PROGRAMMER",
>  	[DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR",
>  	[DEV_ST_TRANSITION_DISABLE] = "DISABLE",
>  };
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index 6f37439..b1b5f2b 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -386,6 +386,7 @@ enum dev_st_transition {
>  	DEV_ST_TRANSITION_READY,
>  	DEV_ST_TRANSITION_SBL,
>  	DEV_ST_TRANSITION_MISSION_MODE,
> +	DEV_ST_TRANSITION_FP,
>  	DEV_ST_TRANSITION_SYS_ERR,
>  	DEV_ST_TRANSITION_DISABLE,
>  	DEV_ST_TRANSITION_MAX,
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index d377d07..8b68657 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -831,6 +831,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
>  			case MHI_EE_AMSS:
>  				st = DEV_ST_TRANSITION_MISSION_MODE;
>  				break;
> +			case MHI_EE_FP:
> +				st = DEV_ST_TRANSITION_FP;
> +				break;
>  			case MHI_EE_RDDM:
>  				mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
>  				write_lock_irq(&mhi_cntrl->pm_lock);
> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> index b65222e..7ac9dfe 100644
> --- a/drivers/bus/mhi/core/pm.c
> +++ b/drivers/bus/mhi/core/pm.c
> @@ -782,6 +782,12 @@ void mhi_pm_st_worker(struct work_struct *work)
>  		case DEV_ST_TRANSITION_MISSION_MODE:
>  			mhi_pm_mission_mode_transition(mhi_cntrl);
>  			break;
> +		case DEV_ST_TRANSITION_FP:
> +			write_lock_irq(&mhi_cntrl->pm_lock);
> +			mhi_cntrl->ee = MHI_EE_FP;
> +			write_unlock_irq(&mhi_cntrl->pm_lock);
> +			mhi_create_devices(mhi_cntrl);
> +			break;
>  		case DEV_ST_TRANSITION_READY:
>  			mhi_ready_state_transition(mhi_cntrl);
>  			break;
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index 8f5bf40..b16afd3 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -117,6 +117,7 @@ struct mhi_link_info {
>   * @MHI_EE_WFW: WLAN firmware mode
>   * @MHI_EE_PTHRU: Passthrough
>   * @MHI_EE_EDL: Embedded downloader
> + * @MHI_EE_FP: Flash Programmer Environment
>   */
>  enum mhi_ee_type {
>  	MHI_EE_PBL,
> @@ -126,7 +127,8 @@ enum mhi_ee_type {
>  	MHI_EE_WFW,
>  	MHI_EE_PTHRU,
>  	MHI_EE_EDL,
> -	MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
> +	MHI_EE_FP,
> +	MHI_EE_MAX_SUPPORTED = MHI_EE_FP,
>  	MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */
>  	MHI_EE_NOT_SUPPORTED,
>  	MHI_EE_MAX,
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ