[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f38e80b6b439e4a9cc349a090923207865b3d3ed.1617189926.git.matthias.schiffer@ew.tq-group.com>
Date: Wed, 31 Mar 2021 13:35:44 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Cc: Lee Jones <lee.jones@...aro.org>, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH 2/3] mfd: tqmx86: clear GPIO IRQ resource when no IRQ is set
The driver was registering IRQ 0 when no IRQ was set. This leads to
warnings with newer kernels.
Clear the resource flags, so no resource is registered at all in this
case.
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
---
drivers/mfd/tqmx86.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index ddddf08b6a4c..732013f40e4e 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -209,6 +209,8 @@ static int tqmx86_probe(struct platform_device *pdev)
/* Assumes the IRQ resource is first. */
tqmx_gpio_resources[0].start = gpio_irq;
+ } else {
+ tqmx_gpio_resources[0].flags = 0;
}
ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id);
--
2.17.1
Powered by blists - more mailing lists