| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210331133811.3221540-2-masahiroy@kernel.org>
Date: Wed, 31 Mar 2021 22:38:03 +0900
From: Masahiro Yamada <masahiroy@...nel.org>
To: linux-kbuild@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Masahiro Yamada <masahiroy@...nel.org>,
Michal Marek <michal.lkml@...kovi.net>
Subject: [PATCH 2/9] kbuild: unify modules(_install) for in-tree and external modules
If you attempt to build/install modules ('make modules(_install)' with
CONFIG_MODULES disabled, you will get a clear error message, but nothing
for external module builds.
Factor out the modules and modules_install rules into the common part,
then you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.
Signed-off-by: Masahiro Yamada <masahiroy@...nel.org>
---
Makefile | 85 ++++++++++++++++++++++++--------------------------------
1 file changed, 36 insertions(+), 49 deletions(-)
diff --git a/Makefile b/Makefile
index 0e06db5ed9d8..99a2bd51c02d 100644
--- a/Makefile
+++ b/Makefile
@@ -1458,7 +1458,6 @@ endif
PHONY += modules
modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_check modules_prepare
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
PHONY += modules_check
modules_check: modules.order
@@ -1476,12 +1475,9 @@ PHONY += modules_prepare
modules_prepare: prepare
$(Q)$(MAKE) $(build)=scripts scripts/module.lds
-# Target to install modules
-PHONY += modules_install
-modules_install: _modinst_ _modinst_post
-
-PHONY += _modinst_
-_modinst_:
+modules_install: __modinst_pre
+PHONY += __modinst_pre
+__modinst_pre:
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@@ -1493,14 +1489,6 @@ _modinst_:
@sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order
@cp -f modules.builtin $(MODLIB)/
@cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-
-# This depmod is only for convenience to give the initial
-# boot a modules.dep even before / is mounted read-write. However the
-# boot script depmod is the master version.
-PHONY += _modinst_post
-_modinst_post: _modinst_
- $(call cmd,depmod)
ifeq ($(CONFIG_MODULE_SIG), y)
PHONY += modules_sign
@@ -1508,20 +1496,6 @@ modules_sign:
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
endif
-else # CONFIG_MODULES
-
-# Modules not configured
-# ---------------------------------------------------------------------------
-
-PHONY += modules modules_install
-modules modules_install:
- @echo >&2
- @echo >&2 "The present kernel configuration has modules disabled."
- @echo >&2 "Type 'make config' and enable loadable module support."
- @echo >&2 "Then build a kernel with module support enabled."
- @echo >&2
- @exit 1
-
endif # CONFIG_MODULES
###
@@ -1769,24 +1743,9 @@ KBUILD_BUILTIN :=
KBUILD_MODULES := 1
build-dirs := $(KBUILD_EXTMOD)
-PHONY += modules
-modules: $(MODORDER)
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
$(MODORDER): descend
@:
-PHONY += modules_install
-modules_install: _emodinst_ _emodinst_post
-
-PHONY += _emodinst_
-_emodinst_:
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-
-PHONY += _emodinst_post
-_emodinst_post: _emodinst_
- $(call cmd,depmod)
-
compile_commands.json: $(extmod-prefix)compile_commands.json
PHONY += compile_commands.json
@@ -1809,6 +1768,39 @@ PHONY += prepare modules_prepare
endif # KBUILD_EXTMOD
+# ---------------------------------------------------------------------------
+# Modules
+
+PHONY += modules modules_install
+
+ifdef CONFIG_MODULES
+
+modules: $(MODORDER)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
+ cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+ $(KERNELRELEASE)
+
+modules_install:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+ $(call cmd,depmod)
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install:
+ @echo >&2 '***'
+ @echo >&2 '*** The present kernel configuration has modules disabled.'
+ @echo >&2 '*** To use the module feature, please run "make menuconfig" etc.'
+ @echo >&2 '*** to enable CONFIG_MODULES.'
+ @echo >&2 '***'
+ @exit 1
+
+endif # CONFIG_MODULES
+
# Single targets
# ---------------------------------------------------------------------------
# To build individual files in subdirectories, you can do like this:
@@ -1997,11 +1989,6 @@ tools/%: FORCE
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -rf $(rm-files)
-# Run depmod only if we have System.map and depmod is executable
-quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
- cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
- $(KERNELRELEASE)
-
# read saved command lines for existing targets
existing-targets := $(wildcard $(sort $(targets)))
--
2.27.0
Powered by blists - more mailing lists