[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210401184446.GA1528755@bjorn-Precision-5520>
Date: Thu, 1 Apr 2021 13:44:46 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Henning Schild <henning.schild@...mens.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Jean Delvare <jdelvare@...e.de>,
Lee Jones <lee.jones@...aro.org>,
Tan Jui Nee <jui.nee.tan@...el.com>,
Jim Quinlan <james.quinlan@...adcom.com>,
Jonathan Yong <jonathan.yong@...el.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-pci@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
Peter Tyser <ptyser@...-inc.com>, hdegoede@...hat.com
Subject: Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge
support library
On Thu, Apr 01, 2021 at 09:23:04PM +0300, Andy Shevchenko wrote:
> On Thu, Apr 01, 2021 at 11:42:56AM -0500, Bjorn Helgaas wrote:
> > On Thu, Apr 01, 2021 at 06:45:02PM +0300, Andy Shevchenko wrote:
> > > On Tue, Mar 09, 2021 at 09:42:52AM +0100, Henning Schild wrote:
> > > > Am Mon, 8 Mar 2021 19:42:21 -0600
> > > > schrieb Bjorn Helgaas <helgaas@...nel.org>:
> > > > > On Mon, Mar 08, 2021 at 09:16:50PM +0200, Andy Shevchenko wrote:
> > > > > > On Mon, Mar 08, 2021 at 12:52:12PM -0600, Bjorn Helgaas wrote:
> > > > > > > On Mon, Mar 08, 2021 at 02:20:16PM +0200, Andy Shevchenko wrote:
> > >
> > > ...
> > >
> > > > > > > > + /* Read the first BAR of the device in question */
> > > > > > > > + __pci_bus_read_base(bus, devfn, pci_bar_unknown, mem,
> > > > > > > > PCI_BASE_ADDRESS_0, true);
> > > > > > >
> > > > > > > I don't get this. Apparently this normally hidden device is
> > > > > > > consuming PCI address space. The PCI core needs to know
> > > > > > > about this. If it doesn't, the PCI core may assign this
> > > > > > > space to another device.
> > > > > >
> > > > > > Right, it returns all 1:s to any request so PCI core *thinks*
> > > > > > it's plugged off (like D3cold or so).
> > > > >
> > > > > I'm asking about the MMIO address space. The BAR is a register
> > > > > in config space. AFAICT, clearing P2SBC_HIDE_BYTE makes that
> > > > > BAR visible. The BAR describes a region of PCI address space.
> > > > > It looks like setting P2SBC_HIDE_BIT makes the BAR disappear
> > > > > from config space, but it sounds like the PCI address space
> > > > > *described* by the BAR is still claimed by the device. If the
> > > > > device didn't respond to that MMIO space, you would have no
> > > > > reason to read the BAR at all.
> > > > >
> > > > > So what keeps the PCI core from assigning that MMIO space to
> > > > > another device?
> > > >
> > > > The device will respond to MMIO while being hidden. I am afraid
> > > > nothing stops a collision, except for the assumption that the BIOS
> > > > is always right and PCI devices never get remapped. But just
> > > > guessing here.
> > > >
> > > > I have seen devices with coreboot having the P2SB visible, and
> > > > most likely relocatable. Making it visible in Linux and not hiding
> > > > it again might work, but probably only as long as Linux will not
> > > > relocate it. Which i am afraid might seriously upset the BIOS,
> > > > depending on what a device does with those GPIOs and which parts
> > > > are implemented in the BIOS.
> > >
> > > So the question is, do we have knobs in PCI core to mark device
> > > fixes in terms of BARs, no relocation must be applied, no other
> > > devices must have the region?
> >
> > I think the closest thing is the IORESOURCE_PCI_FIXED bit that we use
> > for things that must not be moved. Generally PCI resources are
> > associated with a pci_dev, and we set IORESOURCE_PCI_FIXED for BARs,
> > e.g., dev->resource[n]. We do that for IDE legacy regions (see
> > LEGACY_IO_RESOURCE), Langwell devices (pci_fixed_bar_fixup()),
> > "enhanced allocation" (pci_ea_flags()), and some quirks (quirk_io()).
> >
> > In your case, the device is hidden so it doesn't respond to config
> > accesses, so there is no pci_dev for it.
>
> Yes, and the idea is to unhide it on the early stage.
> Would it be possible to quirk it to fix the IO resources?
If I read your current patch right, it unhides the device, reads the
BAR, then hides the device again. I didn't see that it would create a
pci_dev for it.
If you unhide it and then enumerate it normally (and mark the BAR as
IORESOURCE_PCI_FIXED to make sure we never move it), that might work.
Then there should be a pci_dev for it, and it would then show up in
sysfs, lspci, etc. And we should insert the BAR in iomem_resource, so
we should see it in /proc/iomem and we won't accidentally put
something else on top of it.
> > Maybe you could do some sort of quirk that allocates its own struct
> > resource, fills it in, sets IORESOURCE_PCI_FIXED, and does something
> > similar to pci_claim_resource()?
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
Powered by blists - more mailing lists