linux-kernel - Re: [PATCH v6 4/7] pwm: pca9685: Support staggered output ON times

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YGZA75SDBpt3Wt1Z@workstation.tuxnet>
Date:   Thu, 1 Apr 2021 23:53:51 +0200
From:   Clemens Gruber <clemens.gruber@...ruber.com>
To:     Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
Cc:     linux-pwm@...r.kernel.org,
        Thierry Reding <thierry.reding@...il.com>,
        Sven Van Asbroeck <TheSven73@...il.com>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 4/7] pwm: pca9685: Support staggered output ON times

On Thu, Apr 01, 2021 at 10:59:36PM +0200, Uwe Kleine-König wrote:
> On Wed, Mar 31, 2021 at 03:55:49PM +0200, Clemens Gruber wrote:
> > On Wed, Mar 31, 2021 at 02:26:14PM +0200, Clemens Gruber wrote:
> > > On Mon, Mar 29, 2021 at 08:02:06PM +0200, Uwe Kleine-König wrote:
> > > > On Mon, Mar 29, 2021 at 07:16:38PM +0200, Clemens Gruber wrote:
> > > > > On Mon, Mar 29, 2021 at 07:03:57PM +0200, Uwe Kleine-König wrote:
> > > > > > On Mon, Mar 29, 2021 at 02:57:04PM +0200, Clemens Gruber wrote:
> > > > > > > The PCA9685 supports staggered LED output ON times to minimize current
> > > > > > > surges and reduce EMI.
> > > > > > > When this new option is enabled, the ON times of each channel are
> > > > > > > delayed by channel number x counter range / 16, which avoids asserting
> > > > > > > all enabled outputs at the same counter value while still maintaining
> > > > > > > the configured duty cycle of each output.
> > > > > > > 
> > > > > > > Signed-off-by: Clemens Gruber <clemens.gruber@...ruber.com>
> > > > > > 
> > > > > > Is there a reason to not want this staggered output? If it never hurts I
> > > > > > suggest to always stagger and drop the dt property.
> > > > > 
> > > > > There might be applications where you want multiple outputs to assert at
> > > > > the same time / to be synchronized.
> > > > > With staggered outputs mode always enabled, this would no longer be
> > > > > possible as they are spread out according to their channel number.
> > > > > 
> > > > > Not sure how often that usecase is required, but just enforcing the
> > > > > staggered mode by default sounds risky to me.
> > > > 
> > > > There is no such guarantee in the PWM framework, so I don't think we
> > > > need to fear breaking setups. Thierry?
> > > 
> > > Still, someone might rely on it? But let's wait for Thierry's opinion.
> > > 
> > > > 
> > > > One reason we might not want staggering is if we have a consumer who
> > > > cares about config transitions. (This however is moot it the hardware
> > > > doesn't provide sane transitions even without staggering.)
> > > > 
> > > > Did I already ask about races in this driver? I assume there is a
> > > > free running counter and the ON and OFF registers just define where in
> > > > the period the transitions happen, right? Given that changing ON and OFF
> > > > needs two register writes probably all kind of strange things can
> > > > happen, right? (Example thought: for simplicity's sake I assume ON is
> > > > always 0. Then if you want to change from OFF = 0xaaa to OFF = 0xccc we
> > > > might see a period with 0xacc. Depending on how the hardware works we
> > > > might even see 4 edges in a single period then.)
> > > 
> > > Yes, there is a free running counter from 0 to 4095.
> > > And it is probably true, that there can be short intermediate states
> > > with our two register writes.
> > > 
> > > There is a separate mode "Update on ACK" (MODE2 register, bit 3 "OCH"),
> > > which is 0 by default (Outputs change on STOP command) but could be set
> > > to 1 (Outputs change on ACK):
> > > "Update on ACK requires all 4 PWM channel registers to be loaded before
> > > outputs will change on the last ACK."
> > 
> > This would require the auto-increment feature to be enabled, then
> > multiple registers could be written before the STOP condition:
> > LEDn_ON_L, LEDn_ON_H, LEDn_OFF_L & LEDn_OFF_H
> > (With OCH=0 in MODE2)
> 
> Maybe a continued START would work, too?!

Yes, maybe. But according to the datasheet bus transaction examples,
it's enough to have one START condition and write multiple (continuous)
registers using the auto-increment feature. And repeated START does not
seem to be supported via regmap..?

Clemens