linux-kernel - [PATCH] USB:ohci:fix ohci interruption problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1617354660-43964-1-git-send-email-liulongfang@huawei.com>
Date:   Fri, 2 Apr 2021 17:11:00 +0800
From:   Longfang Liu <liulongfang@...wei.com>
To:     <gregkh@...uxfoundation.org>, <mathias.nyman@...el.com>,
        <stern@...land.harvard.edu>
CC:     <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <liulongfang@...wei.com>, <kong.kongxinwei@...ilicon.com>,
        <yisen.zhuang@...wei.com>
Subject: [PATCH] USB:ohci:fix ohci interruption problem

The operating method of the system entering S4 sleep mode:
echo disk > /sys/power/state

When OHCI enters the S4 sleep state, the USB sleep process will call
check_root_hub_suspend() and ohci_bus_suspend() instead of
ohci_suspend() and ohci_bus_suspend(), this causes the OHCI interrupt
to not be closed.

At this time, if just one device interrupt is reported. Since rh_state
has been changed to OHCI_RH_SUSPENDED after ohci_bus_suspend(), the
driver will not process and close this device interrupt. It will cause
the entire system to be stuck during sleep, causing the device to
fail to respond.

When the abnormal interruption reaches 100,000 times, the system will
forcibly close the interruption and make the device unusable.

Because the root cause of the problem is that ohci_suspend is not
called to perform normal interrupt shutdown operations when the system
enters S4 sleep mode.

Therefore, our solution is to specify freeze interface in this mode to
perform normal suspend_common() operations, and call ohci_suspend()
after check_root_hub_suspend() is executed through the suspend_common()
operation.
After using this solution, it is verified by the stress test of sleep
wake up in S4 mode for a long time that this problem no longer occurs.

Signed-off-by: Longfang Liu <liulongfang@...wei.com>
---
 drivers/usb/core/hcd-pci.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 1547aa6..78a56cd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -509,6 +509,11 @@ static int resume_common(struct device *dev, int event)

 #ifdef	CONFIG_PM_SLEEP

+static int hcd_pci_freeze(struct device *dev)
+{
+	return suspend_common(dev, device_may_wakeup(dev));
+}
+
 static int hcd_pci_suspend(struct device *dev)
 {
 	return suspend_common(dev, device_may_wakeup(dev));
@@ -605,8 +610,8 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend_noirq	= hcd_pci_suspend_noirq,
 	.resume_noirq	= hcd_pci_resume_noirq,
 	.resume		= hcd_pci_resume,
-	.freeze		= check_root_hub_suspended,
-	.freeze_noirq	= check_root_hub_suspended,
+	.freeze		= hcd_pci_freeze,
+	.freeze_noirq	= hcd_pci_freeze,
 	.thaw_noirq	= NULL,
 	.thaw		= NULL,
 	.poweroff	= hcd_pci_suspend,
-- 
2.8.1