| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <a01b6cdbae01fff77e26f7a5c40ee5260e1952b5.1617375802.git.christophe.leroy@csgroup.eu>
Date: Fri, 2 Apr 2021 15:18:21 +0000 (UTC)
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: will@...nel.org, danielwa@...co.com, robh@...nel.org,
daniel@...pelevich.san-francisco.ca.us, arnd@...nel.org,
akpm@...ux-foundation.org
Cc: linux-arch@...r.kernel.org, devicetree@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org,
microblaze <monstr@...str.eu>, linux-mips@...r.kernel.org,
nios2 <ley.foon.tan@...el.com>, openrisc@...ts.librecores.org,
linux-hexagon@...r.kernel.org, linux-riscv@...ts.infradead.org,
x86@...nel.org, linux-xtensa@...ux-xtensa.org,
linux-sh@...r.kernel.org, sparclinux@...r.kernel.org,
linux-mm@...ck.org
Subject: [PATCH v4 19/20] mips: Convert to GENERIC_CMDLINE
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
---
arch/mips/Kconfig | 1 +
arch/mips/Kconfig.debug | 44 -----------------------
arch/mips/configs/ar7_defconfig | 1 -
arch/mips/configs/bcm47xx_defconfig | 1 -
arch/mips/configs/bcm63xx_defconfig | 1 -
arch/mips/configs/bmips_be_defconfig | 1 -
arch/mips/configs/bmips_stb_defconfig | 1 -
arch/mips/configs/capcella_defconfig | 1 -
arch/mips/configs/ci20_defconfig | 1 -
arch/mips/configs/cu1000-neo_defconfig | 1 -
arch/mips/configs/cu1830-neo_defconfig | 1 -
arch/mips/configs/e55_defconfig | 1 -
arch/mips/configs/generic_defconfig | 1 -
arch/mips/configs/gpr_defconfig | 1 -
arch/mips/configs/loongson3_defconfig | 1 -
arch/mips/configs/mpc30x_defconfig | 1 -
arch/mips/configs/rt305x_defconfig | 1 -
arch/mips/configs/tb0219_defconfig | 1 -
arch/mips/configs/tb0226_defconfig | 1 -
arch/mips/configs/tb0287_defconfig | 1 -
arch/mips/configs/workpad_defconfig | 1 -
arch/mips/configs/xway_defconfig | 1 -
arch/mips/kernel/relocate.c | 4 +--
arch/mips/kernel/setup.c | 40 ++-------------------
arch/mips/pic32/pic32mzda/early_console.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 --
26 files changed, 5 insertions(+), 108 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..a65ce9ddbfce 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@ config EARLY_PRINTK_8250
config USE_GENERIC_EARLY_PRINTK_8250
bool
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most systems, it is firmware or second stage bootloader that
- by default specifies the kernel command line options. However,
- it might be necessary or advantageous to either override the
- default kernel command line or add a few extra options to it.
- For such cases, this option allows you to hardcode your own
- command line options directly into the kernel. For that, you
- should choose 'Y' here, and fill in the extra boot arguments
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
- Most MIPS systems will normally expect 'N' here and rely upon
- the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, and for the cases
- when you want to add some extra options to the command line or ignore
- the default command line, you can supply some command-line options at
- build time by entering them here. In other cases you can specify
- kernel args so that you don't have to set them up in board prom
- initialization routines.
-
- For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
- options.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firmware arguments"
- depends on CMDLINE_BOOL
- help
- By setting this option to 'Y' you will have your kernel ignore
- command line arguments from firmware or second stage bootloader.
- Instead, the built-in command line will be used exclusively.
-
- Normally, you will choose 'N' here.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index cf9c6329b807..5e8adcd799d0 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -120,5 +120,4 @@ CONFIG_SQUASHFS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 91ce75edbfb4..690f423509f0 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -77,5 +77,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 861f680184b9..19b15424f669 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -65,5 +65,4 @@ CONFIG_PROC_KCORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index 032bb51defe8..2db7712acc5d 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -75,5 +75,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 625bd2d7e685..bc1659d43ca7 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -86,5 +86,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 7bf8971af53b..300032a5caa0 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -87,5 +87,4 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834..f874e421b54f 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -203,5 +203,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9d75f5b77d5d..03cb524967e7 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -123,5 +123,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index 29decd0003c6..d733ccab494e 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -126,5 +126,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index fd82b858a8f0..ffc964d1bae7 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -33,5 +33,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
index 714169e411cf..6003f6c7aa09 100644
--- a/arch/mips/configs/generic_defconfig
+++ b/arch/mips/configs/generic_defconfig
@@ -88,5 +88,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 5cb91509bb7c..8998d28b94c8 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -306,5 +306,4 @@ CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 0e79f81217bc..c4f9a236bd1f 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -408,5 +408,4 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ieee754=relaxed"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index d4e038802510..6ecef2a666fc 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -49,5 +49,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index fec5851c164b..c34441ce6621 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -147,4 +147,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 6547f84750b5..ccf20bd156a1 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -73,5 +73,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 7e099f7c2286..9f78fd00a4f6 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -68,5 +68,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 0d881dd862c0..5529d0dacf94 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -81,5 +81,4 @@ CONFIG_NFSD_V3=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 891a5f77305d..ee712f7b5575 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -61,5 +61,4 @@ CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 9abbc0debc2a..ebd8dbdb0695 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -153,4 +153,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 499a5357c09f..13c955027696 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -244,15 +244,13 @@ static inline __init unsigned long get_random_boot(void)
static inline __init bool kaslr_disabled(void)
{
char *str;
-
-#if defined(CONFIG_CMDLINE_BOOL)
const char *builtin_cmdline = CONFIG_CMDLINE;
str = strstr(builtin_cmdline, "nokaslr");
if (str == builtin_cmdline ||
(str > builtin_cmdline && *(str - 1) == ' '))
return true;
-#endif
+
str = strstr(arcs_cmdline, "nokaslr");
if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' '))
return true;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 279be0153f8b..f2270528011b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -29,6 +29,7 @@
#include <linux/of_fdt.h>
#include <linux/dmi.h>
#include <linux/crash_dump.h>
+#include <linux/cmdline.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@@ -66,12 +67,6 @@ EXPORT_SYMBOL(mips_machtype);
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
@@ -546,28 +541,6 @@ static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
- /*
- * If CMDLINE_OVERRIDE is enabled then initializing the command line is
- * trivial - we simply use the built-in command line unconditionally &
- * unmodified.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- return;
- }
-
- /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
- * to the start of boot_command_line here. Otherwise, empty
- * boot_command_line to undo anything early_init_dt_scan_chosen() did.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- else
- boot_command_line[0] = 0;
-
#ifdef CONFIG_OF_EARLY_FLATTREE
/*
* If we're configured to take boot arguments from DT, look for those
@@ -585,16 +558,7 @@ static void __init bootcmdline_init(void)
* plat_mem_setup() should have filled arcs_cmdline with arguments from
* the bootloader.
*/
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs)
- bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
-
- /*
- * If the user specified a built-in command line & we didn't already
- * prepend it, we append it to boot_command_line here.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
- !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, arcs_cmdline);
}
/*
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
index 25372e62783b..94d3a5ba5e10 100644
--- a/arch/mips/pic32/pic32mzda/early_console.c
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -75,7 +75,7 @@ static char * __init pic32_getcmdline(void)
* arch_mem_init() has not been called yet, so we don't have a real
* command line setup if using CONFIG_CMDLINE_BOOL.
*/
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#ifdef CONFIG_CMDLINE_FORCE
return CONFIG_CMDLINE;
#else
return fw_getcmdline();
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 764f2d022fae..39fdacbbac56 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -40,9 +40,7 @@ void __init plat_mem_setup(void)
pr_info("Found following command lines\n");
pr_info(" boot_command_line: %s\n", boot_command_line);
pr_info(" arcs_cmdline : %s\n", arcs_cmdline);
-#ifdef CONFIG_CMDLINE_BOOL
pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
-#endif
if (dtb != __dtb_start)
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
--
2.25.0
Powered by blists - more mailing lists