| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <61707011a81a365ccc22a6374f797b6f63cf5030.1617375802.git.christophe.leroy@csgroup.eu>
Date: Fri, 2 Apr 2021 15:18:19 +0000 (UTC)
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: will@...nel.org, danielwa@...co.com, robh@...nel.org,
daniel@...pelevich.san-francisco.ca.us, arnd@...nel.org,
akpm@...ux-foundation.org
Cc: linux-arch@...r.kernel.org, devicetree@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org,
microblaze <monstr@...str.eu>, linux-mips@...r.kernel.org,
nios2 <ley.foon.tan@...el.com>, openrisc@...ts.librecores.org,
linux-hexagon@...r.kernel.org, linux-riscv@...ts.infradead.org,
x86@...nel.org, linux-xtensa@...ux-xtensa.org,
linux-sh@...r.kernel.org, sparclinux@...r.kernel.org,
linux-mm@...ck.org
Subject: [PATCH v4 17/20] xtensa: Convert to GENERIC_CMDLINE
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
---
arch/xtensa/Kconfig | 15 +--------------
arch/xtensa/configs/audio_kc705_defconfig | 1 -
arch/xtensa/configs/common_defconfig | 1 -
arch/xtensa/configs/generic_kc705_defconfig | 1 -
arch/xtensa/configs/iss_defconfig | 1 -
arch/xtensa/configs/nommu_kc705_defconfig | 1 -
arch/xtensa/configs/smp_lx200_defconfig | 1 -
arch/xtensa/configs/virt_defconfig | 1 -
arch/xtensa/configs/xip_kc705_defconfig | 1 -
arch/xtensa/kernel/setup.c | 10 ++--------
10 files changed, 3 insertions(+), 30 deletions(-)
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9ad6b7b82707..42309f5e9cda 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,6 +16,7 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
@@ -353,20 +354,6 @@ config GENERIC_CALIBRATE_DELAY
help
The BogoMIPS value can easily be derived from the CPU frequency.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,38400 root=/dev/ram"
- help
- On some architectures (EBSA110 and CATS), there is currently no way
- for the boot loader to pass arguments to the kernel. For these
- architectures, you should supply some command-line options at build
- time by entering them here. As a minimum, you should specify the
- memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
config USE_OF
bool "Flattened Device Tree support"
select OF
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index 3be62da8089b..5f8661a33ab4 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -27,7 +27,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index fa9389869154..6467ebcbb080 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -6,7 +6,6 @@ CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_XTENSA_PLATFORM_XT2000=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index e9d6b6f6eca1..8984c4e68a42 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 32ce8fb068f0..996ad115264d 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_PCI is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 88b2e222d4bf..54250bc74885 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -33,7 +33,6 @@ CONFIG_PREEMPT=y
CONFIG_MEMMAP_CACHEATTR=0xfff2442f
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@...0000000"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705_nommu"
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index a47c85638ec1..58b284fd627f 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -30,7 +30,6 @@ CONFIG_HOTPLUG_CPU=y
# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="lx200mx"
diff --git a/arch/xtensa/configs/virt_defconfig b/arch/xtensa/configs/virt_defconfig
index 6d1387dfa96f..fb4dce2c70a3 100644
--- a/arch/xtensa/configs/virt_defconfig
+++ b/arch/xtensa/configs/virt_defconfig
@@ -21,7 +21,6 @@ CONFIG_XTENSA_VARIANT_DC233C=y
CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x80000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="virt"
diff --git a/arch/xtensa/configs/xip_kc705_defconfig b/arch/xtensa/configs/xip_kc705_defconfig
index 4f1ff9531f6a..ae4427773af2 100644
--- a/arch/xtensa/configs/xip_kc705_defconfig
+++ b/arch/xtensa/configs/xip_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_KERNEL_LOAD_ADDRESS=0xf6000000
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index ed184106e4cf..ebb009f112a5 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -25,6 +25,7 @@
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/cmdline.h>
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
@@ -73,10 +74,6 @@ extern unsigned long loops_per_jiffy;
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-#endif
-
#ifdef CONFIG_PARSE_BOOTPARAM
/*
* Boot parameter parsing.
@@ -257,10 +254,7 @@ void __init init_arch(bp_tag_t *bp_start)
early_init_devtree(dtb_start);
#endif
-#ifdef CONFIG_CMDLINE_BOOL
- if (!command_line[0])
- strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
-#endif
+ cmdline_build(command_line, command_line);
/* Early hook for platforms */
--
2.25.0
Powered by blists - more mailing lists