Message-ID: <366fd8d3-09c9-8cae-3f10-046c4a643792@csgroup.eu>
Date:   Fri, 2 Apr 2021 19:34:19 +0200
From:   Christophe Leroy <christophe.leroy@...roup.eu>
To:     Daniel Walker <danielwa@...co.com>, Will Deacon <will@...nel.org>,
        ob Herring <robh@...nel.org>,
        Daniel Gimpelevich <daniel@...pelevich.san-francisco.ca.us>,
        Andrew Morton <akpm@...ux-foundation.org>, x86@...nel.org,
        linux-mips@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
        Michael Ellerman <mpe@...erman.id.au>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Paul Mackerras <paulus@...ba.org>
Cc:     xe-linux-external@...co.com,
        Ruslan Ruslichenko <rruslich@...co.com>,
        Ruslan Bilovol <rbilovol@...co.com>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/8] CMDLINE: powerpc: convert to generic builtin command
 line



Le 30/03/2021 à 19:56, Daniel Walker a écrit :
> This updates the powerpc code to use the CONFIG_GENERIC_CMDLINE
> option.
> 
> This includes a scripted mass convert of the config files to use
> the new generic cmdline. There is a bit of a trim effect here.
> It would seems that some of the config haven't been trimmed in
> a while.

Sorry, this patch is not acceptable as is, the default for powerpc is CMDLINE_FROM_BOOTLOADER, ie 
builtin-cmdline is taken if and only if none is provided by the bootloader.

As far as I understand, that disappear with this patch.

> 
> The bash script used to convert is as follows,
> 
> if [[ -z "$1" || -z "$2" ]]; then
>          echo "Two arguments are needed."
>          exit 1
> fi
> mkdir $1
> cp $2 $1/.config
> sed -i 's/CONFIG_CMDLINE=/CONFIG_CMDLINE_BOOL=y\nCONFIG_CMDLINE_PREPEND=/g' $1/.config
> make ARCH=$1 O=$1 olddefconfig
> make ARCH=$1 O=$1 savedefconfig
> cp $1/defconfig $2
> rm -Rf $1
> 
> Cc: xe-linux-external@...co.com
> Signed-off-by: Ruslan Ruslichenko <rruslich@...co.com>
> Signed-off-by: Ruslan Bilovol <rbilovol@...co.com>
> Signed-off-by: Daniel Walker <danielwa@...co.com>
> ---
>   arch/powerpc/Kconfig                          | 38 +------------------
>   arch/powerpc/configs/44x/fsp2_defconfig       | 32 ++++++++--------
>   arch/powerpc/configs/44x/iss476-smp_defconfig | 24 ++++++------
>   arch/powerpc/configs/44x/warp_defconfig       | 17 ++++-----
>   arch/powerpc/configs/holly_defconfig          | 13 ++++---
>   arch/powerpc/configs/mvme5100_defconfig       | 23 +++++------
>   arch/powerpc/configs/skiroot_defconfig        | 12 +++---
>   arch/powerpc/configs/storcenter_defconfig     | 18 ++++-----
>   arch/powerpc/kernel/prom_init.c               | 10 +++--
>   9 files changed, 74 insertions(+), 113 deletions(-)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 386ae12d8523..3a19e5b74177 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -167,6 +167,8 @@ config PPC
>   	select EDAC_SUPPORT
>   	select GENERIC_ATOMIC64			if PPC32
>   	select GENERIC_CLOCKEVENTS_BROADCAST	if SMP
> +	select GENERIC_CMDLINE
> +	select GENERIC_CMDLINE_OF
>   	select GENERIC_CMOS_UPDATE
>   	select GENERIC_CPU_AUTOPROBE
>   	select GENERIC_CPU_VULNERABILITIES	if PPC_BARRIER_NOSPEC
> @@ -886,42 +888,6 @@ config PPC_DENORMALISATION
>   	  Add support for handling denormalisation of single precision
>   	  values.  Useful for bare metal only.  If unsure say Y here.
>   
> -config CMDLINE
> -	string "Initial kernel command string"
> -	default ""
> -	help
> -	  On some platforms, there is currently no way for the boot loader to
> -	  pass arguments to the kernel. For these platforms, you can supply
> -	  some command-line options at build time by entering them here.  In
> -	  most cases you will need to specify the root device here.
> -
> -choice
> -	prompt "Kernel command line type" if CMDLINE != ""
> -	default CMDLINE_FROM_BOOTLOADER
> -
> -config CMDLINE_FROM_BOOTLOADER
> -	bool "Use bootloader kernel arguments if available"
> -	help
> -	  Uses the command-line options passed by the boot loader. If
> -	  the boot loader doesn't provide any, the default kernel command
> -	  string provided in CMDLINE will be used.
> -
> -config CMDLINE_EXTEND
> -	bool "Extend bootloader kernel arguments"
> -	help
> -	  The command-line arguments provided by the boot loader will be
> -	  appended to the default kernel command string.
> -
> -config CMDLINE_FORCE
> -	bool "Always use the default kernel command string"
> -	help
> -	  Always use the default kernel command string, even if the boot
> -	  loader passes other arguments to the kernel.
> -	  This is useful if you cannot or don't want to change the
> -	  command-line options your boot loader passes to the kernel.
> -
> -endchoice
> -
>   config EXTRA_TARGETS
>   	string "Additional default image types"
>   	help
> diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig
> index 8da316e61a08..4993db054589 100644
> --- a/arch/powerpc/configs/44x/fsp2_defconfig
> +++ b/arch/powerpc/configs/44x/fsp2_defconfig
> @@ -1,8 +1,6 @@
> -CONFIG_44x=y
>   # CONFIG_SWAP is not set
>   CONFIG_SYSVIPC=y
>   # CONFIG_CROSS_MEMORY_ATTACH is not set
> -# CONFIG_FHANDLE is not set
>   CONFIG_NO_HZ=y
>   CONFIG_HIGH_RES_TIMERS=y
>   CONFIG_IKCONFIG=y
> @@ -13,23 +11,25 @@ CONFIG_BLK_DEV_INITRD=y
>   # CONFIG_RD_XZ is not set
>   # CONFIG_RD_LZO is not set
>   # CONFIG_RD_LZ4 is not set
> +# CONFIG_FHANDLE is not set
>   CONFIG_KALLSYMS_ALL=y
>   CONFIG_BPF_SYSCALL=y
>   CONFIG_EMBEDDED=y
>   CONFIG_PROFILING=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="ip=on rw"
> +CONFIG_44x=y
>   CONFIG_PPC_47x=y
>   # CONFIG_EBONY is not set
>   CONFIG_FSP2=y
>   CONFIG_476FPE_ERR46=y
> -CONFIG_SWIOTLB=y
>   CONFIG_KEXEC=y
>   CONFIG_CRASH_DUMP=y
> -CONFIG_CMDLINE="ip=on rw"
>   # CONFIG_SUSPEND is not set
> -# CONFIG_PCI is not set
> +CONFIG_OPROFILE=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_BLK_DEV_BSG is not set
>   CONFIG_NET=y
>   CONFIG_PACKET=y
>   CONFIG_UNIX=y
> @@ -46,14 +46,12 @@ CONFIG_MTD=y
>   CONFIG_MTD_BLOCK=y
>   CONFIG_MTD_JEDECPROBE=y
>   CONFIG_MTD_CFI_AMDSTD=y
> -CONFIG_MTD_PHYSMAP_OF=y
>   CONFIG_BLK_DEV_RAM=y
>   CONFIG_BLK_DEV_RAM_SIZE=35000
>   # CONFIG_SCSI_PROC_FS is not set
>   CONFIG_BLK_DEV_SD=y
>   # CONFIG_SCSI_LOWLEVEL is not set
>   CONFIG_ATA=y
> -# CONFIG_SATA_PMP is not set
>   # CONFIG_ATA_SFF is not set
>   CONFIG_NETDEVICES=y
>   CONFIG_BONDING=m
> @@ -62,7 +60,6 @@ CONFIG_IBM_EMAC=m
>   # CONFIG_SERIO is not set
>   # CONFIG_VT is not set
>   # CONFIG_LEGACY_PTYS is not set
> -# CONFIG_DEVMEM is not set
>   CONFIG_SERIAL_8250=y
>   CONFIG_SERIAL_8250_CONSOLE=y
>   CONFIG_SERIAL_8250_NR_UARTS=32
> @@ -71,6 +68,7 @@ CONFIG_SERIAL_8250_EXTENDED=y
>   CONFIG_SERIAL_8250_SHARE_IRQ=y
>   CONFIG_SERIAL_OF_PLATFORM=y
>   # CONFIG_HW_RANDOM is not set
> +# CONFIG_DEVMEM is not set
>   CONFIG_I2C=y
>   CONFIG_I2C_IBM_IIC=y
>   CONFIG_PTP_1588_CLOCK=y
> @@ -106,6 +104,12 @@ CONFIG_NFS_V3_ACL=y
>   CONFIG_NFS_V4=y
>   CONFIG_ROOT_NFS=y
>   CONFIG_NLS_DEFAULT="n"
> +CONFIG_CRYPTO_CBC=y
> +CONFIG_CRYPTO_ECB=y
> +CONFIG_CRYPTO_PCBC=y
> +CONFIG_CRYPTO_MD5=y
> +CONFIG_CRYPTO_DES=y
> +# CONFIG_CRYPTO_HW is not set
>   CONFIG_XZ_DEC=y
>   CONFIG_PRINTK_TIME=y
>   CONFIG_MESSAGE_LOGLEVEL_DEFAULT=3
> @@ -113,9 +117,3 @@ CONFIG_DYNAMIC_DEBUG=y
>   CONFIG_DEBUG_INFO=y
>   CONFIG_MAGIC_SYSRQ=y
>   CONFIG_DETECT_HUNG_TASK=y
> -CONFIG_CRYPTO_CBC=y
> -CONFIG_CRYPTO_ECB=y
> -CONFIG_CRYPTO_PCBC=y
> -CONFIG_CRYPTO_MD5=y
> -CONFIG_CRYPTO_DES=y
> -# CONFIG_CRYPTO_HW is not set
> diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
> index c11e777b2f3d..b8d97061517a 100644
> --- a/arch/powerpc/configs/44x/iss476-smp_defconfig
> +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
> @@ -1,5 +1,3 @@
> -CONFIG_44x=y
> -CONFIG_SMP=y
>   CONFIG_SYSVIPC=y
>   CONFIG_POSIX_MQUEUE=y
>   CONFIG_LOG_BUF_SHIFT=14
> @@ -7,19 +5,22 @@ CONFIG_BLK_DEV_INITRD=y
>   CONFIG_EXPERT=y
>   CONFIG_KALLSYMS_ALL=y
>   CONFIG_PROFILING=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="root=/dev/issblk0"
> +CONFIG_44x=y
> +CONFIG_SMP=y
>   CONFIG_PPC_47x=y
>   # CONFIG_EBONY is not set
>   CONFIG_ISS4xx=y
>   CONFIG_HZ_100=y
>   CONFIG_MATH_EMULATION=y
>   CONFIG_IRQ_ALL_CPUS=y
> -CONFIG_CMDLINE="root=/dev/issblk0"
> -# CONFIG_PCI is not set
>   CONFIG_ADVANCED_OPTIONS=y
>   CONFIG_DYNAMIC_MEMSTART=y
> +CONFIG_OPROFILE=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_BLK_DEV_BSG is not set
>   CONFIG_NET=y
>   CONFIG_PACKET=y
>   CONFIG_UNIX=y
> @@ -33,7 +34,6 @@ CONFIG_MTD=y
>   CONFIG_MTD_BLOCK=y
>   CONFIG_MTD_JEDECPROBE=y
>   CONFIG_MTD_CFI_AMDSTD=y
> -CONFIG_MTD_PHYSMAP_OF=y
>   CONFIG_BLK_DEV_RAM=y
>   CONFIG_BLK_DEV_RAM_SIZE=35000
>   # CONFIG_INPUT is not set
> @@ -56,13 +56,13 @@ CONFIG_PROC_KCORE=y
>   CONFIG_TMPFS=y
>   CONFIG_CRAMFS=y
>   # CONFIG_NETWORK_FILESYSTEMS is not set
> -CONFIG_DEBUG_INFO=y
> -CONFIG_MAGIC_SYSRQ=y
> -CONFIG_DETECT_HUNG_TASK=y
> -CONFIG_PPC_EARLY_DEBUG=y
>   CONFIG_CRYPTO_CBC=y
>   CONFIG_CRYPTO_ECB=y
>   CONFIG_CRYPTO_PCBC=y
>   CONFIG_CRYPTO_MD5=y
>   CONFIG_CRYPTO_DES=y
>   # CONFIG_CRYPTO_HW is not set
> +CONFIG_DEBUG_INFO=y
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DETECT_HUNG_TASK=y
> +CONFIG_PPC_EARLY_DEBUG=y
> diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
> index 47252c2d7669..d2e4bbe1492c 100644
> --- a/arch/powerpc/configs/44x/warp_defconfig
> +++ b/arch/powerpc/configs/44x/warp_defconfig
> @@ -1,4 +1,3 @@
> -CONFIG_44x=y
>   CONFIG_LOCALVERSION="-pika"
>   # CONFIG_LOCALVERSION_AUTO is not set
>   CONFIG_SYSVIPC=y
> @@ -7,15 +6,16 @@ CONFIG_IKCONFIG_PROC=y
>   CONFIG_LOG_BUF_SHIFT=14
>   CONFIG_BLK_DEV_INITRD=y
>   CONFIG_EXPERT=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="ip=on"
> +CONFIG_44x=y
>   # CONFIG_EBONY is not set
>   CONFIG_WARP=y
>   CONFIG_PPC4xx_GPIO=y
>   CONFIG_HZ_1000=y
> -CONFIG_CMDLINE="ip=on"
> -# CONFIG_PCI is not set
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_BLK_DEV_BSG is not set
>   CONFIG_NET=y
>   CONFIG_PACKET=y
>   CONFIG_UNIX=y
> @@ -31,7 +31,6 @@ CONFIG_MTD_CMDLINE_PARTS=y
>   CONFIG_MTD_BLOCK=y
>   CONFIG_MTD_CFI=y
>   CONFIG_MTD_CFI_AMDSTD=y
> -CONFIG_MTD_PHYSMAP_OF=y
>   CONFIG_MTD_RAW_NAND=y
>   CONFIG_MTD_NAND_NDFC=y
>   CONFIG_MTD_UBI=y
> @@ -88,9 +87,9 @@ CONFIG_NLS_UTF8=y
>   CONFIG_CRC_CCITT=y
>   CONFIG_CRC_T10DIF=y
>   CONFIG_PRINTK_TIME=y
> +# CONFIG_DEBUG_BUGVERBOSE is not set
>   CONFIG_DEBUG_INFO=y
> -CONFIG_DEBUG_FS=y
>   CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_FS=y
>   CONFIG_DETECT_HUNG_TASK=y
>   # CONFIG_SCHED_DEBUG is not set
> -# CONFIG_DEBUG_BUGVERBOSE is not set
> diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
> index 271daff47d1d..98c0644e80b4 100644
> --- a/arch/powerpc/configs/holly_defconfig
> +++ b/arch/powerpc/configs/holly_defconfig
> @@ -4,17 +4,18 @@ CONFIG_HIGH_RES_TIMERS=y
>   CONFIG_LOG_BUF_SHIFT=14
>   CONFIG_BLK_DEV_INITRD=y
>   CONFIG_EXPERT=y
> -CONFIG_MODULES=y
> -# CONFIG_BLK_DEV_BSG is not set
> -CONFIG_PARTITION_ADVANCED=y
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
>   # CONFIG_PPC_CHRP is not set
>   # CONFIG_PPC_PMAC is not set
>   CONFIG_EMBEDDED6xx=y
>   CONFIG_PPC_HOLLY=y
>   CONFIG_GEN_RTC=y
> -CONFIG_BINFMT_MISC=y
> -CONFIG_CMDLINE="console=ttyS0,115200"
>   # CONFIG_SECCOMP is not set
> +CONFIG_MODULES=y
> +# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_BINFMT_MISC=y
>   CONFIG_NET=y
>   CONFIG_PACKET=y
>   CONFIG_UNIX=y
> @@ -53,8 +54,8 @@ CONFIG_PROC_KCORE=y
>   CONFIG_TMPFS=y
>   CONFIG_NFS_FS=y
>   CONFIG_ROOT_NFS=y
> +# CONFIG_DEBUG_BUGVERBOSE is not set
>   CONFIG_MAGIC_SYSRQ=y
>   # CONFIG_SCHED_DEBUG is not set
> -# CONFIG_DEBUG_BUGVERBOSE is not set
>   CONFIG_XMON=y
>   CONFIG_XMON_DEFAULT=y
> diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig
> index 1fed6be95d53..884a3e0defde 100644
> --- a/arch/powerpc/configs/mvme5100_defconfig
> +++ b/arch/powerpc/configs/mvme5100_defconfig
> @@ -11,16 +11,17 @@ CONFIG_LOG_BUF_SHIFT=14
>   # CONFIG_NET_NS is not set
>   CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>   # CONFIG_COMPAT_BRK is not set
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
>   # CONFIG_PPC_CHRP is not set
>   # CONFIG_PPC_PMAC is not set
>   CONFIG_EMBEDDED6xx=y
>   CONFIG_MVME5100=y
>   CONFIG_KVM_GUEST=y
>   CONFIG_HZ_100=y
> -CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_BLK_DEV_BSG is not set
>   # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>   # CONFIG_COMPACTION is not set
>   CONFIG_NET=y
> @@ -108,13 +109,6 @@ CONFIG_NLS_CODEPAGE_437=m
>   CONFIG_NLS_CODEPAGE_932=m
>   CONFIG_NLS_ISO8859_1=m
>   CONFIG_NLS_UTF8=m
> -CONFIG_CRC_CCITT=m
> -CONFIG_CRC_T10DIF=y
> -CONFIG_XZ_DEC=y
> -CONFIG_MAGIC_SYSRQ=y
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_DETECT_HUNG_TASK=y
> -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
>   CONFIG_CRYPTO_CBC=y
>   CONFIG_CRYPTO_PCBC=m
>   CONFIG_CRYPTO_MD5=y
> @@ -125,3 +119,10 @@ CONFIG_CRYPTO_DES=y
>   CONFIG_CRYPTO_SERPENT=m
>   CONFIG_CRYPTO_TWOFISH=m
>   CONFIG_CRYPTO_DEFLATE=m
> +CONFIG_CRC_CCITT=m
> +CONFIG_CRC_T10DIF=y
> +CONFIG_XZ_DEC=y
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_KERNEL=y
> +CONFIG_DETECT_HUNG_TASK=y
> +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
> diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
> index b806a5d3a695..5e11995508d7 100644
> --- a/arch/powerpc/configs/skiroot_defconfig
> +++ b/arch/powerpc/configs/skiroot_defconfig
> @@ -26,6 +26,8 @@ CONFIG_PERF_EVENTS=y
>   # CONFIG_SLAB_MERGE_DEFAULT is not set
>   CONFIG_SLAB_FREELIST_RANDOM=y
>   CONFIG_SLAB_FREELIST_HARDENED=y
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
>   CONFIG_PPC64=y
>   CONFIG_ALTIVEC=y
>   CONFIG_VSX=y
> @@ -42,14 +44,11 @@ CONFIG_KEXEC=y
>   CONFIG_KEXEC_FILE=y
>   CONFIG_PRESERVE_FA_DUMP=y
>   CONFIG_IRQ_ALL_CPUS=y
> -CONFIG_NUMA=y
>   CONFIG_PPC_64K_PAGES=y
>   CONFIG_SCHED_SMT=y
> -CONFIG_CMDLINE="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
> -# CONFIG_SECCOMP is not set
>   # CONFIG_PPC_MEM_KEYS is not set
>   CONFIG_JUMP_LABEL=y
> -CONFIG_STRICT_KERNEL_RWX=y
> +# CONFIG_SECCOMP is not set
>   CONFIG_MODULES=y
>   CONFIG_MODULE_UNLOAD=y
>   CONFIG_MODULE_SIG_FORCE=y
> @@ -80,7 +79,6 @@ CONFIG_BLK_DEV_NVME=m
>   CONFIG_NVME_MULTIPATH=y
>   CONFIG_EEPROM_AT24=m
>   # CONFIG_CXL is not set
> -# CONFIG_OCXL is not set
>   CONFIG_BLK_DEV_SD=m
>   CONFIG_BLK_DEV_SR=m
>   CONFIG_CHR_DEV_SG=m
> @@ -199,7 +197,6 @@ CONFIG_PHYLIB=y
>   CONFIG_INPUT_EVDEV=y
>   CONFIG_INPUT_MISC=y
>   # CONFIG_SERIO_SERPORT is not set
> -# CONFIG_DEVMEM is not set
>   CONFIG_SERIAL_8250=y
>   CONFIG_SERIAL_8250_CONSOLE=y
>   CONFIG_IPMI_HANDLER=y
> @@ -207,9 +204,10 @@ CONFIG_IPMI_DEVICE_INTERFACE=y
>   CONFIG_IPMI_POWERNV=y
>   CONFIG_IPMI_WATCHDOG=y
>   CONFIG_HW_RANDOM=y
> +# CONFIG_DEVMEM is not set
> +# CONFIG_DEVPORT is not set
>   CONFIG_TCG_TPM=y
>   CONFIG_TCG_TIS_I2C_NUVOTON=y
> -# CONFIG_DEVPORT is not set
>   CONFIG_I2C=y
>   # CONFIG_I2C_COMPAT is not set
>   CONFIG_I2C_CHARDEV=y
> diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
> index 47dcfaddc1ac..17a17b8ae160 100644
> --- a/arch/powerpc/configs/storcenter_defconfig
> +++ b/arch/powerpc/configs/storcenter_defconfig
> @@ -2,18 +2,19 @@ CONFIG_SYSVIPC=y
>   CONFIG_LOG_BUF_SHIFT=14
>   CONFIG_EXPERT=y
>   # CONFIG_KALLSYMS is not set
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> -CONFIG_PARTITION_ADVANCED=y
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
>   # CONFIG_PPC_CHRP is not set
>   # CONFIG_PPC_PMAC is not set
>   CONFIG_EMBEDDED6xx=y
>   CONFIG_STORCENTER=y
>   CONFIG_HZ_100=y
> -CONFIG_BINFMT_MISC=y
> -CONFIG_CMDLINE="console=ttyS0,115200"
>   # CONFIG_SECCOMP is not set
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_BINFMT_MISC=y
>   CONFIG_NET=y
>   CONFIG_PACKET=m
>   CONFIG_UNIX=y
> @@ -35,7 +36,6 @@ CONFIG_BLK_DEV_SD=y
>   CONFIG_BLK_DEV_SR=y
>   CONFIG_SCSI_SPI_ATTRS=y
>   CONFIG_ATA=y
> -CONFIG_PATA_VIA=y
>   CONFIG_MD=y
>   CONFIG_BLK_DEV_MD=y
>   CONFIG_MD_LINEAR=y
> @@ -44,16 +44,13 @@ CONFIG_MD_RAID1=y
>   CONFIG_MD_RAID456=y
>   CONFIG_NETDEVICES=y
>   CONFIG_DUMMY=m
> -CONFIG_R8169=y
>   # CONFIG_INPUT is not set
>   # CONFIG_SERIO is not set
>   # CONFIG_VT is not set
>   CONFIG_SERIAL_8250=y
>   CONFIG_SERIAL_8250_CONSOLE=y
> -# CONFIG_SERIAL_8250_PCI is not set
>   CONFIG_SERIAL_8250_NR_UARTS=2
>   CONFIG_SERIAL_8250_RUNTIME_UARTS=2
> -CONFIG_NVRAM=y
>   CONFIG_I2C=y
>   CONFIG_I2C_CHARDEV=y
>   CONFIG_I2C_MPC=y
> @@ -76,4 +73,3 @@ CONFIG_NLS_CODEPAGE_437=y
>   CONFIG_NLS_ISO8859_1=y
>   CONFIG_NLS_UTF8=y
>   CONFIG_CRC_T10DIF=y
> -# CONFIG_ENABLE_MUST_CHECK is not set
> diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
> index 2c2f33155317..27fece82ff93 100644
> --- a/arch/powerpc/kernel/prom_init.c
> +++ b/arch/powerpc/kernel/prom_init.c
> @@ -27,6 +27,7 @@
>   #include <linux/initrd.h>
>   #include <linux/bitops.h>
>   #include <linux/pgtable.h>
> +#include <linux/cmdline.h>
>   #include <asm/prom.h>
>   #include <asm/rtas.h>
>   #include <asm/page.h>
> @@ -309,6 +310,7 @@ static char __init *prom_strstr(const char *s1, const char *s2)
>   	return NULL;
>   }
>   
> +#ifdef GENERIC_CMDLINE_NEED_STRLCAT
>   static size_t __init prom_strlcat(char *dest, const char *src, size_t count)
>   {
>   	size_t dsize = prom_strlen(dest);
> @@ -328,6 +330,7 @@ static size_t __init prom_strlcat(char *dest, const char *src, size_t count)
>   	return res;
>   
>   }
> +#endif
>   
>   #ifdef CONFIG_PPC_PSERIES
>   static int __init prom_strtobool(const char *s, bool *res)
> @@ -780,12 +783,11 @@ static void __init early_cmdline_parse(void)
>   	prom_cmd_line[0] = 0;
>   	p = prom_cmd_line;
>   
> -	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0)
> +	if ((long)prom.chosen > 0)
>   		l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
>   
> -	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0')
> -		prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE,
> -			     sizeof(prom_cmd_line));
> +	cmdline_add_builtin_custom(prom_cmd_line, (l > 0 ? p : NULL), sizeof(prom_cmd_line),
> +					__prombss, prom_strlcpy, prom_strlcat);
>   
>   	prom_printf("command line: %s\n", prom_cmd_line);
>   
> 

Powered by blists - more mailing lists