[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YGpgqJjpBPQ5//li@pendragon.ideasonboard.com>
Date: Mon, 5 Apr 2021 03:58:16 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Douglas Anderson <dianders@...omium.org>
Cc: Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Sam Ravnborg <sam@...nborg.org>,
Linus W <linus.walleij@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
robdclark@...omium.org, Stephen Boyd <swboyd@...omium.org>,
Steev Klimaszewski <steev@...i.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
linux-arm-msm@...r.kernel.org,
Stanislav Lisovskiy <stanislav.lisovskiy@...el.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
Robert Foss <robert.foss@...aro.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 05/12] drm/bridge: ti-sn65dsi86: Move
drm_panel_unprepare() to post_disable()
Hi Doug,
Thank you for the patch.
On Fri, Apr 02, 2021 at 03:28:39PM -0700, Douglas Anderson wrote:
> We prepared the panel in pre_enable() so we should unprepare it in
> post_disable() to match.
>
> This becomes important once we start using pre_enable() and
> post_disable() to make sure things are powered on (and then off again)
> when reading the EDID.
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> ---
>
> (no changes since v1)
>
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index c006678c9921..e30460002c48 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -452,8 +452,6 @@ static void ti_sn_bridge_disable(struct drm_bridge *bridge)
> regmap_write(pdata->regmap, SN_ML_TX_MODE_REG, 0);
> /* disable DP PLL */
> regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 0);
> -
> - drm_panel_unprepare(pdata->panel);
> }
>
> static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata)
> @@ -869,6 +867,8 @@ static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
> {
> struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
>
> + drm_panel_unprepare(pdata->panel);
> +
> clk_disable_unprepare(pdata->refclk);
>
> pm_runtime_put_sync(pdata->dev);
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists