linux-kernel - [PATCH 2/2] ARM: dts: qcom: msm8974-klte: Add bluetooth support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Tue,  6 Apr 2021 17:05:51 +0300
From:   Alexey Minnekhanov <alexeymin@...tmarketos.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org (open list:ARM/QUALCOMM SUPPORT),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Cc:     ~postmarketos/upstreaming@...ts.sr.ht,
        Alexey Minnekhanov <alexeymin@...tmarketos.org>
Subject: [PATCH 2/2] ARM: dts: qcom: msm8974-klte: Add bluetooth support

Broadcom BCM4354 is used on Samsung Galaxy S5 phone
on BLSP2 UART8 bus.

Signed-off-by: Alexey Minnekhanov <alexeymin@...tmarketos.org>
---
 .../boot/dts/qcom-msm8974-samsung-klte.dts    | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index a0f7f461f48c8..138353cb4e1d6 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -322,6 +322,27 @@ serial@...1e000 {
 		status = "okay";
 	};
 
+	/* blsp2_uart8 */
+	serial@...5e000 {
+		status = "okay";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&blsp2_uart8_pins_active>;
+		pinctrl-1 = <&blsp2_uart8_pins_sleep>;
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			max-speed = <3000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_pins>;
+			device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&msmgpio>;
+			interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wakeup";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		input-name = "gpio-keys";
@@ -356,6 +377,35 @@ volume-up {
 	};
 
 	pinctrl@...10000 {
+		blsp2_uart8_pins_active: blsp2-uart8-pins-active {
+			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+			function = "blsp_uart8";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep {
+			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		bt_pins: bt-pins {
+			hostwake {
+				pins = "gpio75";
+				function = "gpio";
+				drive-strength = <16>;
+				input-enable;
+			};
+
+			devwake {
+				pins = "gpio91";
+				function = "gpio";
+				drive-strength = <2>;
+			};
+		};
+
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
 				pins = "sdc1_clk";
-- 
2.26.3