[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YGyGFOrXwEsqCW/z@lunn.ch>
Date: Tue, 6 Apr 2021 18:02:28 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Chun-Kuang Hu <chunkuang.hu@...nel.org>
Cc: DENG Qingfang <dqfext@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Landen Chao <Landen.Chao@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Russell King <linux@...linux.org.uk>,
Sean Wang <sean.wang@...iatek.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Sergio Paracuellos <sergio.paracuellos@...il.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
linux-staging@...ts.linux.dev, DTML <devicetree@...r.kernel.org>,
netdev@...r.kernel.org, Weijie Gao <weijie.gao@...iatek.com>,
Chuanhong Guo <gch981213@...il.com>,
René van Dorst <opensource@...rst.com>
Subject: Re: [RFC net-next 1/4] net: phy: add MediaTek PHY driver
On Tue, Apr 06, 2021 at 11:47:08PM +0800, Chun-Kuang Hu wrote:
> Hi, Qingfang:
>
> DENG Qingfang <dqfext@...il.com> 於 2021年4月6日 週二 下午10:19寫道:
> >
> > Add support for MediaTek PHYs found in MT7530 and MT7531 switches.
> > The initialization procedure is from the vendor driver, but due to lack
> > of documentation, the function of some register values remains unknown.
> >
> > Signed-off-by: DENG Qingfang <dqfext@...il.com>
> > ---
> > drivers/net/phy/Kconfig | 5 ++
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/mediatek.c | 109 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 115 insertions(+)
> > create mode 100644 drivers/net/phy/mediatek.c
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index a615b3660b05..edd858cec9ec 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -207,6 +207,11 @@ config MARVELL_88X2222_PHY
> > Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
> > Transceiver.
> >
> > +config MEDIATEK_PHY
>
> There are many Mediatek phy drivers in [1], so use a specific name.
Those are generic PHY drivers, where as this patch is add a PHY
driver. The naming used in this patch is consistent with other PHY
drivers. So i'm happy with this patch in this respect.
PHY drivers have been around a lot longer than generic PHY drivers. So
i would actually say the generic PHY driver naming should make it
clear they are generic PHYs, not PHYs.
But lets not bike shed about this too much.
Andrew
Powered by blists - more mailing lists