| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAE2upjTZ6s7qFojfi3B=3uT_tH9BcS78LL1ZKa2hm+jFP0p6Ng@mail.gmail.com>
Date: Wed, 7 Apr 2021 11:22:40 -0400
From: Rajneesh Bhardwaj <irenic.rajneesh@...il.com>
To: "David E. Box" <david.e.box@...ux.intel.com>
Cc: hdegoede@...hat.com, mgross@...ux.intel.com,
gayatri.kammela@...el.com, platform-driver-x86@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/9] platform/x86: intel_pmc_core: Handle sub-states generically
A minor suggestion, num_modes should be called num_lpm_modes since
it's a pmcdev's property.
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@...il.com>
On Wed, Mar 31, 2021 at 11:06 PM David E. Box
<david.e.box@...ux.intel.com> wrote:
>
> From: Gayatri Kammela <gayatri.kammela@...el.com>
>
> The current implementation of pmc_core_substate_res_show() is written
> specifically for Tiger Lake. However, new platforms will also have
> sub-states and may support different modes. Therefore rewrite the code to
> handle sub-states generically.
>
> Read the number and type of enabled states from the PMC. Use the Low
> Power Mode (LPM) priority register to store the states in order from
> shallowest to deepest for displaying. Add a for_each macro to simplify
> this. While changing the sub-state display it makes sense to show only the
> "enabled" sub-states instead of showing all possible ones. After this
> patch, the debugfs file looks like this:
>
> Substate Residency
> S0i2.0 0
> S0i3.0 0
> S0i2.1 9329279
> S0i3.1 0
> S0i3.2 0
>
> Suggested-by: David E. Box <david.e.box@...ux.intel.com>
> Signed-off-by: Gayatri Kammela <gayatri.kammela@...el.com>
> Signed-off-by: David E. Box <david.e.box@...ux.intel.com>
> ---
> drivers/platform/x86/intel_pmc_core.c | 59 ++++++++++++++++++++++-----
> drivers/platform/x86/intel_pmc_core.h | 18 +++++++-
> 2 files changed, 64 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
> index 5ca40fe3da59..ce300c2942d0 100644
> --- a/drivers/platform/x86/intel_pmc_core.c
> +++ b/drivers/platform/x86/intel_pmc_core.c
> @@ -577,8 +577,9 @@ static const struct pmc_reg_map tgl_reg_map = {
> .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
> .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
> .ltr_ignore_max = TGL_NUM_IP_IGN_ALLOWED,
> - .lpm_modes = tgl_lpm_modes,
> + .lpm_num_maps = TGL_LPM_NUM_MAPS,
> .lpm_en_offset = TGL_LPM_EN_OFFSET,
> + .lpm_priority_offset = TGL_LPM_PRI_OFFSET,
> .lpm_residency_offset = TGL_LPM_RESIDENCY_OFFSET,
> .lpm_sts = tgl_lpm_maps,
> .lpm_status_offset = TGL_LPM_STATUS_OFFSET,
> @@ -1028,18 +1029,14 @@ DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr);
> static int pmc_core_substate_res_show(struct seq_file *s, void *unused)
> {
> struct pmc_dev *pmcdev = s->private;
> - const char **lpm_modes = pmcdev->map->lpm_modes;
> u32 offset = pmcdev->map->lpm_residency_offset;
> - u32 lpm_en;
> - int index;
> + int i, mode;
>
> - lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset);
> - seq_printf(s, "status substate residency\n");
> - for (index = 0; lpm_modes[index]; index++) {
> - seq_printf(s, "%7s %7s %-15u\n",
> - BIT(index) & lpm_en ? "Enabled" : " ",
> - lpm_modes[index], pmc_core_reg_read(pmcdev, offset));
> - offset += 4;
> + seq_printf(s, "%-10s %-15s\n", "Substate", "Residency");
> +
> + pmc_for_each_mode(i, mode, pmcdev) {
> + seq_printf(s, "%-10s %-15u\n", pmc_lpm_modes[mode],
> + pmc_core_reg_read(pmcdev, offset + (4 * mode)));
> }
>
> return 0;
> @@ -1091,6 +1088,45 @@ static int pmc_core_pkgc_show(struct seq_file *s, void *unused)
> }
> DEFINE_SHOW_ATTRIBUTE(pmc_core_pkgc);
>
> +static void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev)
> +{
> + u8 lpm_priority[LPM_MAX_NUM_MODES];
> + u32 lpm_en;
> + int mode, i, p;
> +
> + /* Use LPM Maps to indicate support for substates */
> + if (!pmcdev->map->lpm_num_maps)
> + return;
> +
> + lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset);
> + pmcdev->num_modes = hweight32(lpm_en);
> +
> + /* Each byte contains information for 2 modes (7:4 and 3:0) */
> + for (mode = 0; mode < LPM_MAX_NUM_MODES; mode += 2) {
> + u8 priority = pmc_core_reg_read_byte(pmcdev,
> + pmcdev->map->lpm_priority_offset + (mode / 2));
> + int pri0 = GENMASK(3, 0) & priority;
> + int pri1 = (GENMASK(7, 4) & priority) >> 4;
> +
> + lpm_priority[pri0] = mode;
> + lpm_priority[pri1] = mode + 1;
> + }
> +
> + /*
> + * Loop though all modes from lowest to highest priority,
> + * and capture all enabled modes in order
> + */
> + i = 0;
> + for (p = LPM_MAX_NUM_MODES - 1; p >= 0; p--) {
> + int mode = lpm_priority[p];
> +
> + if (!(BIT(mode) & lpm_en))
> + continue;
> +
> + pmcdev->lpm_en_modes[i++] = mode;
> + }
> +}
> +
> static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
> {
> debugfs_remove_recursive(pmcdev->dbgfs_dir);
> @@ -1267,6 +1303,7 @@ static int pmc_core_probe(struct platform_device *pdev)
>
> mutex_init(&pmcdev->lock);
> pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(pmcdev);
> + pmc_core_get_low_power_modes(pmcdev);
> pmc_core_do_dmi_quirks(pmcdev);
>
> /*
> diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
> index f33cd2c34835..5a4e3a49f5b1 100644
> --- a/drivers/platform/x86/intel_pmc_core.h
> +++ b/drivers/platform/x86/intel_pmc_core.h
> @@ -187,6 +187,8 @@ enum ppfear_regs {
> #define ICL_PMC_LTR_WIGIG 0x1BFC
> #define ICL_PMC_SLP_S0_RES_COUNTER_STEP 0x64
>
> +#define LPM_MAX_NUM_MODES 8
> +
> #define TGL_NUM_IP_IGN_ALLOWED 22
> #define TGL_PMC_SLP_S0_RES_COUNTER_STEP 0x7A
>
> @@ -199,8 +201,10 @@ enum ppfear_regs {
> /* Tigerlake Low Power Mode debug registers */
> #define TGL_LPM_STATUS_OFFSET 0x1C3C
> #define TGL_LPM_LIVE_STATUS_OFFSET 0x1C5C
> +#define TGL_LPM_PRI_OFFSET 0x1C7C
> +#define TGL_LPM_NUM_MAPS 6
>
> -const char *tgl_lpm_modes[] = {
> +const char *pmc_lpm_modes[] = {
> "S0i2.0",
> "S0i2.1",
> "S0i2.2",
> @@ -258,8 +262,9 @@ struct pmc_reg_map {
> const u32 ltr_ignore_max;
> const u32 pm_vric1_offset;
> /* Low Power Mode registers */
> - const char **lpm_modes;
> + const int lpm_num_maps;
> const u32 lpm_en_offset;
> + const u32 lpm_priority_offset;
> const u32 lpm_residency_offset;
> const u32 lpm_status_offset;
> const u32 lpm_live_status_offset;
> @@ -278,6 +283,8 @@ struct pmc_reg_map {
> * @check_counters: On resume, check if counters are getting incremented
> * @pc10_counter: PC10 residency counter
> * @s0ix_counter: S0ix residency (step adjusted)
> + * @num_modes: Count of enabled modes
> + * @lpm_en_modes: Array of enabled modes from lowest to highest priority
> *
> * pmc_dev contains info about power management controller device.
> */
> @@ -292,6 +299,13 @@ struct pmc_dev {
> bool check_counters; /* Check for counter increments on resume */
> u64 pc10_counter;
> u64 s0ix_counter;
> + int num_modes;
> + int lpm_en_modes[LPM_MAX_NUM_MODES];
> };
>
> +#define pmc_for_each_mode(i, mode, pmcdev) \
> + for (i = 0, mode = pmcdev->lpm_en_modes[i]; \
> + i < pmcdev->num_modes; \
> + i++, mode = pmcdev->lpm_en_modes[i])
> +
> #endif /* PMC_CORE_H */
> --
> 2.25.1
>
--
Thanks,
Rajneesh
Powered by blists - more mailing lists