| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8a68f0a377016bd8026359e7ca10c658087ffac6.1617776878.git.pavle.rohalj@gmail.com>
Date: Tue, 6 Apr 2021 23:37:03 -0700
From: Pavle Rohalj <pavle.rohalj@...il.com>
To: sudipm.mukherjee@...il.com, teddy.wang@...iconmotion.com,
gregkh@...uxfoundation.org, linux-fbdev@...r.kernel.org,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: [PATCH v2 11/49] staging: sm750fb: Rename i2cWriteReg and i2cReadReg
to snake case
Fix "Avoid CamelCase" checkpatch.pl checks for i2cWriteReg
and i2cReadReg in ddk750_sii164.c.
Signed-off-by: Pavle Rohalj <pavle.rohalj@...il.com>
---
drivers/staging/sm750fb/ddk750_sii164.c | 46 ++++++++++++-------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 6c343e2e0433..af14273b99eb 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -12,11 +12,11 @@
#define USE_HW_I2C
#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
+ #define i2c_write_reg sm750_hw_i2c_write_reg
+ #define i2c_read_reg sm750_hw_i2c_read_reg
#else
- #define i2cWriteReg sm750_sw_i2c_write_reg
- #define i2cReadReg sm750_sw_i2c_read_reg
+ #define i2c_write_reg sm750_sw_i2c_write_reg
+ #define i2c_read_reg sm750_sw_i2c_read_reg
#endif
/* SII164 Vendor and Device ID */
@@ -39,9 +39,9 @@ unsigned short sii164_get_vendor_id(void)
{
unsigned short vendorID;
- vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ vendorID = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_LOW);
return vendorID;
@@ -58,9 +58,9 @@ unsigned short sii164_get_device_id(void)
{
unsigned short deviceID;
- deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ deviceID = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_LOW);
return deviceID;
@@ -176,7 +176,7 @@ long sii164_init_chip(unsigned char edge_select,
else
config |= SII164_CONFIGURATION_VSYNC_AS_IS;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
/*
* De-skew enabled with default 111b value.
@@ -214,7 +214,7 @@ long sii164_init_chip(unsigned char edge_select,
config |= SII164_DESKEW_8_STEP;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
/* Enable/Disable Continuous Sync. */
if (continuous_sync_enable == 0)
@@ -231,12 +231,12 @@ long sii164_init_chip(unsigned char edge_select,
/* Set the PLL Filter value */
config |= ((pll_filter_value & 0x07) << 1);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_PLL, config);
/* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
return 0;
}
@@ -283,17 +283,17 @@ void sii164_set_power(unsigned char powerUp)
{
unsigned char config;
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
if (powerUp == 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
} else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
}
}
@@ -306,7 +306,7 @@ void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
{
unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detectReg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
switch (hotPlugMode) {
case SII164_HOTPLUG_DISABLE:
@@ -325,7 +325,7 @@ void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
}
/*
@@ -338,7 +338,7 @@ void sii164_enable_hot_plug_detection(unsigned char enableHotPlug)
{
unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detectReg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
@@ -361,7 +361,7 @@ unsigned char sii164_is_connected(void)
{
unsigned char hotPlugValue;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ hotPlugValue = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_HOT_PLUG_STATUS_MASK;
if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
return 1;
@@ -381,7 +381,7 @@ unsigned char sii164_check_interrupt(void)
{
unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detectReg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_MONITOR_STATE_MASK;
if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
@@ -398,8 +398,8 @@ void sii164_clear_interrupt(void)
unsigned char detectReg;
/* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT,
+ detectReg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
--
2.30.2
Powered by blists - more mailing lists