[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210407073534.376722-1-benjamin.gaignard@collabora.com>
Date: Wed, 7 Apr 2021 09:35:21 +0200
From: Benjamin Gaignard <benjamin.gaignard@...labora.com>
To: ezequiel@...labora.com, p.zabel@...gutronix.de, mchehab@...nel.org,
robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
festevam@...il.com, lee.jones@...aro.org,
gregkh@...uxfoundation.org, mripard@...nel.org,
paul.kocialkowski@...tlin.com, wens@...e.org,
jernej.skrabec@...l.net, hverkuil-cisco@...all.nl,
emil.l.velikov@...il.com
Cc: kernel@...gutronix.de, linux-imx@....com,
linux-media@...r.kernel.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devel@...verdev.osuosl.org,
kernel@...labora.com, cphealy@...il.com,
Benjamin Gaignard <benjamin.gaignard@...labora.com>
Subject: [PATCH v9 00/13] Add HANTRO G2/HEVC decoder support for IMX8MQ
The IMX8MQ got two VPUs but until now only G1 has been enabled.
This series aim to add the second VPU (aka G2) and provide basic
HEVC decoding support.
To be able to decode HEVC it is needed to add/update some of the
structures in the uapi. In addition of them one HANTRO dedicated
control is required to inform the driver of the numbre of bits to skip
at the beginning of the slice header.
The hardware require to allocate few auxiliary buffers to store the
references frame or tile size data.
The driver has been tested with fluster test suite stream.
For example with this command: ./fluster.py run -ts JCT-VC-HEVC_V1 -d GStreamer-H.265-V4L2SL-Gst1.0
Finally the both VPUs will have a node the device-tree and be
independent from v4l2 point of view.
A branch with all the dev is available here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/upstream_g2_v9
version 9:
- Corrections in commits messages.
- Define the dedicated control in hevc-controls.h
- Add note in documentation.
- Change max value of the dedicated control.
- Rebased on media_tree/master branch.
version 8:
- Add reviewed-by and ack-by tags
- Fix the warnings reported by kernel test robot
- Only patch 9 (adding dedicated control), patch 11 (HEVC support) and
patch 13 (DT changes) are still missing of review/ack tag.
version 7:
- Remove 'q' from syscon phandle name to make usable for iMX8MM too.
Update the bindings documentation.
- Add review/ack tags.
- Rebase on top of media_tree/master
- Be more accurate when computing the size of the memory needed motion
vectors.
- Explain why the all clocks need to set in the both DT node.
version 6:
- fix the errors reported by kernel test robot
version 5:
- use syscon instead of VPU reset driver.
- Do not break kernel/DT backward compatibility.
- Add documentation for dedicated Hantro control.
- Fix the remarks done by Ezequeil (typo, comments, unused function)
- Run v4l2-compliance without errors (see below).
- Do not add field to distinguish version, check postproc reg instead
version 4:
- Split the changes in hevc controls in 2 commits to make them easier to
review.
- Change hantro_codec_ops run() prototype to return errors
- Hantro v4l2 dedicated control is now only an integer
- rebase on top of VPU reset changes posted here:
https://www.spinics.net/lists/arm-kernel/msg878440.html
- Various fix from previous remarks
- Limit the modifications in API to what the driver needs
version 3:
- Fix typo in Hantro v4l2 dedicated control
- Add documentation for the new structures and fields
- Rebased on top of media_tree for-linus-5.12-rc1 tag
version 2:
- remove all change related to scaling
- squash commits to a coherent split
- be more verbose about the added fields
- fix the comments done by Ezequiel about dma_alloc_coherent usage
- fix Dan's comments about control copy, reverse the test logic
in tile_buffer_reallocate, rework some goto and return cases.
- be more verbose about why I change the bindings
- remove all sign-off expect mime since it is confusing
- remove useless clocks in VPUs nodes
./v4l2-compliance -m 1
v4l2-compliance 1.21.0-4705, 64 bits, 64-bit time_t
v4l2-compliance SHA: 733f7a54f79d 2021-02-03 08:25:49
Compliance test for hantro-vpu device /dev/media1:
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.11.0
Hardware revision: 0x00000000 (0)
Driver version : 5.11.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media1 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 3 Interfaces: 1 Pads: 4 Links: 4
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK
Total for hantro-vpu device /dev/media1: 8, Succeeded: 8, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for hantro-vpu device /dev/video1:
Driver Info:
Driver name : hantro-vpu
Card type : nxp,imx8mq-vpu-g2-dec
Bus info : platform: hantro-vpu
Driver version : 5.11.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.11.0
Hardware revision: 0x00000000 (0)
Driver version : 5.11.0
Interface Info:
ID : 0x0300000c
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : nxp,imx8mq-vpu-g2-dec-source
Function : V4L2 I/O
Pad 0x01000002 : 0: Source
Link 0x02000008: to remote pad 0x1000004 of entity 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 8 Private Controls: 1
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for hantro-vpu device /dev/video1: 46, Succeeded: 46, Failed: 0, Warnings: 0
Grand Total for hantro-vpu device /dev/media1: 54, Succeeded: 54, Failed: 0, Warnings: 0
Benjamin
Benjamin Gaignard (13):
dt-bindings: mfd: Add 'nxp,imx8mq-vpu-ctrl' to syscon list
dt-bindings: media: nxp,imx8mq-vpu: Update the bindings for G2 support
media: hantro: Use syscon instead of 'ctrl' register
media: hevc: Add fields and flags for hevc PPS
media: hevc: Add decode params control
media: hantro: change hantro_codec_ops run prototype to return errors
media: hantro: Define HEVC codec profiles and supported features
media: hantro: Only use postproc when post processed formats are
defined
media: uapi: Add a control for HANTRO driver
media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control
media: hantro: Introduce G2/HEVC decoder
media: hantro: IMX8M: add variant for G2/HEVC codec
arm64: dts: imx8mq: Add node to G2 hardware
.../bindings/media/nxp,imx8mq-vpu.yaml | 53 +-
.../devicetree/bindings/mfd/syscon.yaml | 1 +
.../userspace-api/media/drivers/hantro.rst | 19 +
.../userspace-api/media/drivers/index.rst | 1 +
.../media/v4l/ext-ctrls-codec.rst | 108 +++-
.../media/v4l/vidioc-queryctrl.rst | 6 +
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 43 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 28 +-
drivers/staging/media/hantro/Makefile | 2 +
drivers/staging/media/hantro/hantro.h | 18 +-
drivers/staging/media/hantro/hantro_drv.c | 99 ++-
.../staging/media/hantro/hantro_g1_h264_dec.c | 10 +-
.../media/hantro/hantro_g1_mpeg2_dec.c | 4 +-
.../staging/media/hantro/hantro_g1_vp8_dec.c | 6 +-
.../staging/media/hantro/hantro_g2_hevc_dec.c | 587 ++++++++++++++++++
drivers/staging/media/hantro/hantro_g2_regs.h | 198 ++++++
.../staging/media/hantro/hantro_h1_jpeg_enc.c | 4 +-
drivers/staging/media/hantro/hantro_hevc.c | 327 ++++++++++
drivers/staging/media/hantro/hantro_hw.h | 69 +-
.../staging/media/hantro/hantro_postproc.c | 14 +
drivers/staging/media/hantro/hantro_v4l2.c | 5 +-
drivers/staging/media/hantro/imx8m_vpu_hw.c | 128 +++-
.../media/hantro/rk3399_vpu_hw_jpeg_enc.c | 4 +-
.../media/hantro/rk3399_vpu_hw_mpeg2_dec.c | 4 +-
.../media/hantro/rk3399_vpu_hw_vp8_dec.c | 6 +-
drivers/staging/media/sunxi/cedrus/cedrus.c | 6 +
drivers/staging/media/sunxi/cedrus/cedrus.h | 1 +
.../staging/media/sunxi/cedrus/cedrus_dec.c | 2 +
.../staging/media/sunxi/cedrus/cedrus_h265.c | 12 +-
include/media/hevc-ctrls.h | 46 +-
30 files changed, 1690 insertions(+), 121 deletions(-)
create mode 100644 Documentation/userspace-api/media/drivers/hantro.rst
create mode 100644 drivers/staging/media/hantro/hantro_g2_hevc_dec.c
create mode 100644 drivers/staging/media/hantro/hantro_g2_regs.h
create mode 100644 drivers/staging/media/hantro/hantro_hevc.c
--
2.25.1
Powered by blists - more mailing lists