| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210407111647.5cmknwltwl2rfvmu@riteshh-domain>
Date: Wed, 7 Apr 2021 16:46:47 +0530
From: riteshh <riteshh@...ux.ibm.com>
To: Wen Yang <wenyang@...ux.alibaba.com>
Cc: tytso@....edu, Andreas Dilger <adilger.kernel@...ger.ca>,
Wen Yang <simon.wy@...baba-inc.com>,
Baoyou Xie <baoyou.xie@...baba-inc.com>,
linux-ext4@...r.kernel.org, linux-kernel@...r.kernel.org,
Jan Kara <jack@...e.cz>
Subject: Re: [PATCH] ext4: add a configurable parameter to prevent endless
loop in ext4_mb_discard_group_preallocations
On 21/04/07 03:01PM, Wen Yang wrote:
> From: Wen Yang <simon.wy@...baba-inc.com>
>
> The kworker has occupied 100% of the CPU for several days:
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 68086 root 20 0 0 0 0 R 100.0 0.0 9718:18 kworker/u64:11
>
> And the stack obtained through sysrq is as follows:
> [20613144.850426] task: ffff8800b5e08000 task.stack: ffffc9001342c000
> [20613144.850427] RIP: 0010:[<ffffffffa0240743>] ^Ac
> [<ffffffffa0240743>] ext4_mb_discard_group_preallocations+0x1b3/0x480
> [ext4]
> [20613144.850428] RSP: 0018:ffffc9001342f740 EFLAGS: 00000246
> [20613144.850428] RAX: 0000000000000000 RBX: ffff8813bb5f72f0 RCX:
> 0000000000000000
> [20613144.850429] RDX: 0000000000000001 RSI: ffff880268291d78 RDI:
> ffff880268291d98
> [20613144.850430] RBP: ffffc9001342f7e8 R08: 00493b8bc070da84 R09:
> 0000000000000000
> [20613144.850430] R10: 0000000000001800 R11: ffff880155e7c380 R12:
> ffff880268291d98
> [20613144.850431] R13: ffff8813bb5f72e0 R14: ffff880268291d78 R15:
> ffff880268291d68
> [20613144.850432] FS: 0000000000000000(0000) GS:ffff881fbf080000(0000)
> knlGS:0000000000000000
> [20613144.850432] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [20613144.850433] CR2: 000000c000823010 CR3: 0000000001c08000 CR4:
> 00000000003606f0
> [20613144.850434] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [20613144.850434] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
> 0000000000000400
> [20613144.850435] Stack:
> [20613144.850435] ffff881942d6a6e8^Ac ffff8813bb5f72d0^Ac 00000001a02427cf^Ac 0000000000000140^Ac
> [20613144.850436] ffff880f80618000^Ac 0000000000000000^Ac ffffc9001342f770^Ac ffffc9001342f770^Ac
> [20613144.850437] ffffea0056360dc0^Ac ffff88158d837000^Ac ffffea0045155f80^Ac ffff88114557e000^Ac
> [20613144.850438] Call Trace:
> [20613144.850439] [<ffffffffa0244209>] ext4_mb_new_blocks+0x429/0x550 [ext4]
> [20613144.850439] [<ffffffffa02389ae>] ext4_ext_map_blocks+0xb5e/0xf30 [ext4]
> [20613144.850440] [<ffffffff811c0001>] ? numa_zonelist_order_handler+0xa1/0x1c0
> [20613144.850441] [<ffffffffa0204b52>] ext4_map_blocks+0x172/0x620 [ext4]
> [20613144.850441] [<ffffffffa020835d>] ? ext4_writepages+0x4cd/0xf00 [ext4]
> [20613144.850442] [<ffffffffa0208675>] ext4_writepages+0x7e5/0xf00 [ext4]
> [20613144.850442] [<ffffffff811c1410>] ? wb_position_ratio+0x1f0/0x1f0
> [20613144.850443] [<ffffffff811c487e>] do_writepages+0x1e/0x30
> [20613144.850444] [<ffffffff81280265>] __writeback_single_inode+0x45/0x320
> [20613144.850444] [<ffffffff81280ab2>] writeback_sb_inodes+0x272/0x600
> [20613144.850445] [<ffffffff81280ed2>] __writeback_inodes_wb+0x92/0xc0
> [20613144.850445] [<ffffffff81281238>] wb_writeback+0x268/0x300
> [20613144.850446] [<ffffffff812819f4>] wb_workfn+0xb4/0x380
> [20613144.850447] [<ffffffff810a5dc9>] process_one_work+0x189/0x420
> [20613144.850447] [<ffffffff810a60ae>] worker_thread+0x4e/0x4b0
> [20613144.850448] [<ffffffff810a6060>] ? process_one_work+0x420/0x420
> [20613144.850448] [<ffffffff810ac696>] kthread+0xe6/0x100
> [20613144.850449] [<ffffffff810ac5b0>] ? kthread_park+0x60/0x60
> [20613144.850450] [<ffffffff81741dd9>] ret_from_fork+0x39/0x50
>
> The cpu resources of the cloud server are precious, and the server
> cannot be restarted after running for a long time, so a configuration
> parameter is added to prevent this endless loop.
Strange, if there is a endless loop here. Then I would definitely see
if there is any accounting problem in pa->pa_count. Otherwise busy=1
should not be set everytime. ext4_mb_show_pa() function may help debug this.
If yes, then that means there always exists either a file preallocation
or a group preallocation. Maybe it is possible, in some use case.
Others may know of such use case, if any.
>
>
>
> Signed-off-by: Wen Yang <wenyang@...ux.alibaba.com>
> Cc: "Theodore Ts'o" <tytso@....edu>
> Cc: Andreas Dilger <adilger.kernel@...ger.ca>
> Cc: Baoyou Xie <baoyou.xie@...baba-inc.com>
> Cc: linux-ext4@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> ---
> fs/ext4/ext4.h | 1 +
> fs/ext4/mballoc.c | 19 +++++++++++++++----
> fs/ext4/mballoc.h | 2 ++
> fs/ext4/sysfs.c | 2 ++
> 4 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
> index 2866d24..c238fec 100644
> --- a/fs/ext4/ext4.h
> +++ b/fs/ext4/ext4.h
> @@ -1543,6 +1543,7 @@ struct ext4_sb_info {
> unsigned long s_mb_last_start;
> unsigned int s_mb_prefetch;
> unsigned int s_mb_prefetch_limit;
> + unsigned long s_mb_max_retries_per_group;
unsigned int should be enuf no?
>
> /* stats for buddy allocator */
> atomic_t s_bal_reqs; /* number of reqs with len > 1 */
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index 99bf091..c126b15 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -2853,6 +2853,8 @@ int ext4_mb_init(struct super_block *sb)
> sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
> sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
> sbi->s_mb_max_inode_prealloc = MB_DEFAULT_MAX_INODE_PREALLOC;
> + sbi->s_mb_max_retries_per_group = MB_DISCARD_RETRIES_FOREVER;
> +
> /*
> * The default group preallocation is 512, which for 4k block
> * sizes translates to 2 megabytes. However for bigalloc file
> @@ -4206,6 +4208,7 @@ static void ext4_mb_new_preallocation(struct ext4_allocation_context *ac)
> ext4_group_t group, int needed)
> {
> struct ext4_group_info *grp = ext4_get_group_info(sb, group);
> + struct ext4_sb_info *sbi = EXT4_SB(sb);
> struct buffer_head *bitmap_bh = NULL;
> struct ext4_prealloc_space *pa, *tmp;
> struct list_head list;
> @@ -4213,6 +4216,7 @@ static void ext4_mb_new_preallocation(struct ext4_allocation_context *ac)
> int err;
> int busy = 0;
> int free, free_total = 0;
> + int discard_retries = 0;
unsigned int would be better for comparison too.
>
> mb_debug(sb, "discard preallocation for group %u\n", group);
> if (list_empty(&grp->bb_prealloc_list))
> @@ -4291,11 +4295,18 @@ static void ext4_mb_new_preallocation(struct ext4_allocation_context *ac)
>
> /* if we still need more blocks and some PAs were used, try again */
> if (free_total < needed && busy) {
> - ext4_unlock_group(sb, group);
> - cond_resched();
> - busy = 0;
> - goto repeat;
> + ++discard_retries;
> + if (sbi && sbi->s_mb_max_retries_per_group < discard_retries) {
> + ext4_warning(sb, "The retry count has exceeded the limit: %lu",
> + sbi->s_mb_max_retries_per_group);
I guess it won't hurt if we do add ext4_mb_show_pa() too.
It is anyways enabled only if CONFIG_EXT4_DEBUG is set.
> + } else {
> + ext4_unlock_group(sb, group);
> + cond_resched();
> + busy = 0;
> + goto repeat;
> + }
> }
> +
> ext4_unlock_group(sb, group);
> ext4_mb_unload_buddy(&e4b);
> put_bh(bitmap_bh);
> diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
> index e75b474..fa5b5a3 100644
> --- a/fs/ext4/mballoc.h
> +++ b/fs/ext4/mballoc.h
> @@ -78,6 +78,8 @@
> */
> #define MB_DEFAULT_MAX_INODE_PREALLOC 512
>
> +#define MB_DISCARD_RETRIES_FOREVER (-1UL)
Depending upon if this issue can actually happen normally too, then maybe
we need a this value to be pre-configured.
Again others may have a better suggestion here.
> +
> struct ext4_free_data {
> /* this links the free block information from sb_info */
> struct list_head efd_list;
> diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
> index 075aa3a..3549520 100644
> --- a/fs/ext4/sysfs.c
> +++ b/fs/ext4/sysfs.c
> @@ -213,6 +213,7 @@ static ssize_t journal_task_show(struct ext4_sb_info *sbi, char *buf)
> EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
> EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
> EXT4_RW_ATTR_SBI_UI(mb_max_inode_prealloc, s_mb_max_inode_prealloc);
> +EXT4_RW_ATTR_SBI_UL(mb_max_retries_per_group, s_mb_max_retries_per_group);
> EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
> EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error);
> EXT4_RW_ATTR_SBI_UI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
> @@ -260,6 +261,7 @@ static ssize_t journal_task_show(struct ext4_sb_info *sbi, char *buf)
> ATTR_LIST(mb_stream_req),
> ATTR_LIST(mb_group_prealloc),
> ATTR_LIST(mb_max_inode_prealloc),
> + ATTR_LIST(mb_max_retries_per_group),
> ATTR_LIST(max_writeback_mb_bump),
> ATTR_LIST(extent_max_zeroout_kb),
> ATTR_LIST(trigger_fs_error),
> --
> 1.8.3.1
>
Powered by blists - more mailing lists