| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210408170457.91409-14-manivannan.sadhasivam@linaro.org>
Date: Thu, 8 Apr 2021 22:34:55 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 13/15] ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
Thundercomm T55 is the development platform based on the Qualcomm SDX55
chipset. This basic support includes support for debug serial, NAND
flash, BAM DMA, USB and regulators support.
https://www.thundercomm.com/app_en/product/1593506006365532
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/qcom-sdx55-t55.dts | 281 +++++++++++++++++++++++++++
2 files changed, 283 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-sdx55-t55.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 874ab2b66187..1d314fdf6014 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -930,7 +930,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \
qcom-sdx55-mtp.dtb \
- qcom-sdx55-telit-fn980-tlb.dtb
+ qcom-sdx55-telit-fn980-tlb.dtb \
+ qcom-sdx55-t55.dtb
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
new file mode 100644
index 000000000000..ddcd53aa533d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+ model = "Thundercomm T55 Development Kit";
+ compatible = "qcom,sdx55-t55", "qcom,sdx55";
+ qcom,board-id = <0xb010008 0x4>;
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mpss_debug_mem: memory@...00000 {
+ no-map;
+ reg = <0x8ef00000 0x800000>;
+ };
+
+ ipa_fw_mem: memory@...ed000 {
+ no-map;
+ reg = <0x8fced000 0x10000>;
+ };
+
+ mpss_adsp_mem: memory@...00000 {
+ no-map;
+ reg = <0x90800000 0xf800000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_bob_3p3: pmx55-bob {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_s7e_mx_0p752: pmx55-s7e {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s7e_mx_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_sd_vdd: sd-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_sd_vdd";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ vin-supply = <&vreg_vddpx_2>;
+ };
+
+ vreg_vddpx_2: vddpx-2 {
+ compatible = "regulator-gpio";
+ regulator-name = "vreg_vddpx_2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0>, <2850000 1>;
+ startup-delay-us = <200000>;
+ enable-active-high;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pmx55-rpmh-regulators {
+ compatible = "qcom,pmx55-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+ vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+ vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+ vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+ vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+ vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+ vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+ vdd-l15-supply = <&vreg_s2e_1p224>;
+ vdd-l16-supply = <&vreg_s4e_1p904>;
+
+ vreg_s2e_1p224: smps2 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ vreg_s3e_0p824: smps3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s4e_1p904: smps4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1960000>;
+ };
+
+ vreg_l1e_bb_1p2: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo2 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l4e_bb_0p875: ldo4 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <872000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5e_bb_1p7: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10e_3p1: ldo10 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo14 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo15 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* efs2 partition is secured */
+ secure-regions = <0x500000 0xb00000>;
+ };
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ memory-region = <&mpss_adsp_mem>;
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+ vdda33-supply = <&vreg_l10e_3p1>;
+ vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+ vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
--
2.25.1
Powered by blists - more mailing lists