[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YHGkxRJ8S22/ZqDZ@kali>
Date: Sat, 10 Apr 2021 18:44:45 +0530
From: Mitali Borkar <mitaliborkar810@...il.com>
To: Julia Lawall <julia.lawall@...ia.fr>
Cc: clabbe@...libre.com, mchehab@...nel.org,
gregkh@...uxfoundation.org, linux-media@...r.kernel.org,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
outreachy-kernel@...glegroups.com, mitali_s@...iitr.ac.in
Subject: Re: [Outreachy kernel] [PATCH v2 2/2] staging: media: zoran: remove
and add comments; align code
On Sat, Apr 10, 2021 at 01:56:24PM +0200, Julia Lawall wrote:
>
>
> On Sat, 10 Apr 2021, Mitali Borkar wrote:
>
> > On Fri, Apr 09, 2021 at 10:12:12PM +0200, Julia Lawall wrote:
> > >
> > >
> > > On Sat, 10 Apr 2021, Mitali Borkar wrote:
> > >
> > > > Removed comments from the same line and added them to new line above the
> > > > blocks, aligned everything properly by using tabs to make code neater
> > > > and improve readability.
> > > >
> > > > Signed-off-by: Mitali Borkar <mitaliborkar810@...il.com>
> > > > ---
> > > > drivers/staging/media/zoran/zr36057.h | 293 ++++++++++++++------------
> > > > 1 file changed, 162 insertions(+), 131 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/media/zoran/zr36057.h b/drivers/staging/media/zoran/zr36057.h
> > > > index 93075459f910..198d344a8879 100644
> > > > --- a/drivers/staging/media/zoran/zr36057.h
> > > > +++ b/drivers/staging/media/zoran/zr36057.h
> > > > @@ -12,145 +12,176 @@
> > > >
> > > > /* Zoran ZR36057 registers */
> > > >
> > > > -#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */
> > > > -#define ZR36057_VFEHCR_HS_POL BIT(30)
> > > > -#define ZR36057_VFEHCR_H_START 10
> > > > +/* Video Front End, Horizontal Configuration Register */
> > > > +#define ZR36057_VFEHCR 0x000
> > > > +#define ZR36057_VFEHCR_HS_POL BIT(30)
> > >
> > > It looks like the alignment didn't work out here? Check that the use of
> > > tabs is the same as on the nearby lines.
> > >
> > Do I need to align BIT(30), 10, 0x000 and rest in same column or should I
> > align them separately?
>
> If there are a bunch of #defines with no blank line between them and
> similar names (these all start with ZR36057_VFEHCR), then it can be nice
> to line them all up.
>
> >
> > > > +#define ZR36057_VFEHCR_H_START 10
> > > > #define ZR36057_VFEHCR_H_END 0
> > > > #define ZR36057_VFEHCR_HMASK 0x3ff
> > > >
> > > > -#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */
> > > > -#define ZR36057_VFEVCR_VS_POL BIT(30)
> > > > -#define ZR36057_VFEVCR_V_START 10
> > > > +/* Video Front End, Vertical Configuration Register */
> > > > +#define ZR36057_VFEVCR 0x004
> > > > +#define ZR36057_VFEVCR_VS_POL BIT(30)
> > > > +#define ZR36057_VFEVCR_V_START 10
> > > > #define ZR36057_VFEVCR_V_END 0
> > > > #define ZR36057_VFEVCR_VMASK 0x3ff
> > > >
> > > > -#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */
> > > > -#define ZR36057_VFESPFR_EXT_FL BIT(26)
> > > > -#define ZR36057_VFESPFR_TOP_FIELD BIT(25)
> > > > -#define ZR36057_VFESPFR_VCLK_POL BIT(24)
> > > > -#define ZR36057_VFESPFR_H_FILTER 21
> > > > -#define ZR36057_VFESPFR_HOR_DCM 14
> > > > -#define ZR36057_VFESPFR_VER_DCM 8
> > > > -#define ZR36057_VFESPFR_DISP_MODE 6
> > > > -#define ZR36057_VFESPFR_YUV422 (0 << 3)
> > > > -#define ZR36057_VFESPFR_RGB888 BIT(3)
> > > > -#define ZR36057_VFESPFR_RGB565 (2 << 3)
> > > > -#define ZR36057_VFESPFR_RGB555 (3 << 3)
> > > > -#define ZR36057_VFESPFR_ERR_DIF BIT(2)
> > > > -#define ZR36057_VFESPFR_PACK24 BIT(1)
> > > > -#define ZR36057_VFESPFR_LITTLE_ENDIAN BIT(0)
> > > > -
> > > > -#define ZR36057_VDTR 0x00c /* Video Display "Top" Register */
> > > > -
> > > > -#define ZR36057_VDBR 0x010 /* Video Display "Bottom" Register */
> > > > -
> > > > -#define ZR36057_VSSFGR 0x014 /* Video Stride, Status, and Frame Grab Register */
> > > > -#define ZR36057_VSSFGR_DISP_STRIDE 16
> > > > -#define ZR36057_VSSFGR_VID_OVF BIT(8)
> > > > -#define ZR36057_VSSFGR_SNAP_SHOT BIT(1)
> > > > -#define ZR36057_VSSFGR_FRAME_GRAB BIT(0)
> > > > -
> > > > -#define ZR36057_VDCR 0x018 /* Video Display Configuration Register */
> > > > -#define ZR36057_VDCR_VID_EN BIT(31)
> > > > -#define ZR36057_VDCR_MIN_PIX 24
> > > > -#define ZR36057_VDCR_TRITON BIT(24)
> > > > -#define ZR36057_VDCR_VID_WIN_HT 12
> > > > -#define ZR36057_VDCR_VID_WIN_WID 0
> > > > -
> > > > -#define ZR36057_MMTR 0x01c /* Masking Map "Top" Register */
> > > > -
> > > > -#define ZR36057_MMBR 0x020 /* Masking Map "Bottom" Register */
> > > > -
> > > > -#define ZR36057_OCR 0x024 /* Overlay Control Register */
> > > > -#define ZR36057_OCR_OVL_ENABLE BIT(15)
> > > > -#define ZR36057_OCR_MASK_STRIDE 0
> > > > -
> > > > -#define ZR36057_SPGPPCR 0x028 /* System, PCI, and General Purpose Pins Control Register */
> > > > -#define ZR36057_SPGPPCR_SOFT_RESET BIT(24)
> > > > -
> > > > -#define ZR36057_GPPGCR1 0x02c /* General Purpose Pins and GuestBus Control Register (1) */
> > > > -
> > > > -#define ZR36057_MCSAR 0x030 /* MPEG Code Source Address Register */
> > > > -
> > > > -#define ZR36057_MCTCR 0x034 /* MPEG Code Transfer Control Register */
> > > > -#define ZR36057_MCTCR_COD_TIME BIT(30)
> > > > -#define ZR36057_MCTCR_C_EMPTY BIT(29)
> > > > -#define ZR36057_MCTCR_C_FLUSH BIT(28)
> > > > +/* Video Front End, Scaler and Pixel Format Register */
> > > > +#define ZR36057_VFESPFR 0x008
> > > > +#define ZR36057_VFESPFR_EXT_FL BIT(26)
> > > > +#define ZR36057_VFESPFR_TOP_FIELD BIT(25)
> > > > +#define ZR36057_VFESPFR_VCLK_POL BIT(24)
> > > > +#define ZR36057_VFESPFR_H_FILTER 21
> > > > +#define ZR36057_VFESPFR_HOR_DCM 14
> > > > +#define ZR36057_VFESPFR_VER_DCM 8
> > > > +#define ZR36057_VFESPFR_DISP_MODE 6
> > >
> > > The above four lines also look odd.
> > >
> > > > +#define ZR36057_VFESPFR_YUV422 (0 << 3)
> > > > +#define ZR36057_VFESPFR_RGB888 BIT(3)
> > >
> > > Was there really a BIT in the original code, or is this a patch against
> > > your previous patch?
> > >
> > No, I added BIT(3), originally it was (1<<3).
>
> OK, I don't think it is good to have just one BIT when there is a clear
> pattern for the others that the BIT is hiding. So you should do the
> alignment patch against the original code, and not the code with this
> change.
>
Mam, my new patch is ready but I am not sure how to send, the v1/2 is
not on top, I have not made changes in it because it was not required. Now, how to
send these two mails as a patchset, since in between these two git
commits, I have another commits too.
> julia
>
> > > > +#define ZR36057_VFESPFR_RGB565 (2 << 3)
> > > > +#define ZR36057_VFESPFR_RGB555 (3 << 3)
> > > > +#define ZR36057_VFESPFR_ERR_DIF BIT(2)
> > > > +#define ZR36057_VFESPFR_PACK24 BIT(1)
> > > > +#define ZR36057_VFESPFR_LITTLE_ENDIAN BIT(0)
> > > > +
> > > > +/* Video Display "Top" Register */
> > > > +#define ZR36057_VDTR 0x00c
> > > > +
> > > > +/* Video Display "Bottom" Register */
> > > > +#define ZR36057_VDBR 0x010
> > > > +
> > > > +/* Video Stride, Status, and Frame Grab Register */
> > > > +#define ZR36057_VSSFGR 0x014
> > > > +#define ZR36057_VSSFGR_DISP_STRIDE 16
> > > > +#define ZR36057_VSSFGR_VID_OVF BIT(8)
> > > > +#define ZR36057_VSSFGR_SNAP_SHOT BIT(1)
> > > > +#define ZR36057_VSSFGR_FRAME_GRAB BIT(0)
> > > > +
> > > > +/* Video Display Configuration Register */
> > > > +#define ZR36057_VDCR 0x018
> > > > +#define ZR36057_VDCR_VID_EN BIT(31)
> > > > +#define ZR36057_VDCR_MIN_PIX 24
> > > > +#define ZR36057_VDCR_TRITON BIT(24)
> > > > +#define ZR36057_VDCR_VID_WIN_HT 12
> > >
> > > These don't look well aligned either.
> > >
> > > Please check on the rest.
> > >
> > Yes Ma'am, I am rechecking this.
> >
> > > julia
> > >
> > >
> > > > +#define ZR36057_VDCR_VID_WIN_WID 0
> > > > +
> > > > +/* Masking Map "Top" Register */
> > > > +#define ZR36057_MMTR 0x01c
> > > > +
> > > > +/* Masking Map "Bottom" Register */
> > > > +#define ZR36057_MMBR 0x020
> > > > +
> > > > +/* Overlay Control Register */
> > > > +#define ZR36057_OCR 0x024
> > > > +#define ZR36057_OCR_OVL_ENABLE BIT(15)
> > > > +#define ZR36057_OCR_MASK_STRIDE 0
> > > > +
> > > > +/* System, PCI, and General Purpose Pins Control Register */
> > > > +#define ZR36057_SPGPPCR 0x028
> > > > +#define ZR36057_SPGPPCR_SOFT_RESET BIT(24)
> > > > +
> > > > +/* General Purpose Pins and GuestBus Control Register (1) */
> > > > +#define ZR36057_GPPGCR1 0x02c
> > > > +
> > > > +/* MPEG Code Source Address Register */
> > > > +#define ZR36057_MCSAR 0x030
> > > > +
> > > > +/* MPEG Code Transfer Control Register */
> > > > +#define ZR36057_MCTCR 0x034
> > > > +#define ZR36057_MCTCR_COD_TIME BIT(30)
> > > > +#define ZR36057_MCTCR_C_EMPTY BIT(29)
> > > > +#define ZR36057_MCTCR_C_FLUSH BIT(28)
> > > > #define ZR36057_MCTCR_COD_GUEST_ID 20
> > > > #define ZR36057_MCTCR_COD_GUEST_REG 16
> > > >
> > > > -#define ZR36057_MCMPR 0x038 /* MPEG Code Memory Pointer Register */
> > > > -
> > > > -#define ZR36057_ISR 0x03c /* Interrupt Status Register */
> > > > -#define ZR36057_ISR_GIRQ1 BIT(30)
> > > > -#define ZR36057_ISR_GIRQ0 BIT(29)
> > > > -#define ZR36057_ISR_COD_REP_IRQ BIT(28)
> > > > -#define ZR36057_ISR_JPEG_REP_IRQ BIT(27)
> > > > -
> > > > -#define ZR36057_ICR 0x040 /* Interrupt Control Register */
> > > > -#define ZR36057_ICR_GIRQ1 BIT(30)
> > > > -#define ZR36057_ICR_GIRQ0 BIT(29)
> > > > -#define ZR36057_ICR_COD_REP_IRQ BIT(28)
> > > > -#define ZR36057_ICR_JPEG_REP_IRQ BIT(27)
> > > > -#define ZR36057_ICR_INT_PIN_EN BIT(24)
> > > > -
> > > > -#define ZR36057_I2CBR 0x044 /* I2C Bus Register */
> > > > -#define ZR36057_I2CBR_SDA BIT(1)
> > > > -#define ZR36057_I2CBR_SCL BIT(0)
> > > > -
> > > > -#define ZR36057_JMC 0x100 /* JPEG Mode and Control */
> > > > -#define ZR36057_JMC_JPG BIT(31)
> > > > -#define ZR36057_JMC_JPG_EXP_MODE (0 << 29)
> > > > -#define ZR36057_JMC_JPG_CMP_MODE BIT(29)
> > > > -#define ZR36057_JMC_MJPG_EXP_MODE (2 << 29)
> > > > -#define ZR36057_JMC_MJPG_CMP_MODE (3 << 29)
> > > > -#define ZR36057_JMC_RTBUSY_FB BIT(6)
> > > > -#define ZR36057_JMC_GO_EN BIT(5)
> > > > -#define ZR36057_JMC_SYNC_MSTR BIT(4)
> > > > -#define ZR36057_JMC_FLD_PER_BUFF BIT(3)
> > > > -#define ZR36057_JMC_VFIFO_FB BIT(2)
> > > > -#define ZR36057_JMC_CFIFO_FB BIT(1)
> > > > -#define ZR36057_JMC_STLL_LIT_ENDIAN BIT(0)
> > > > -
> > > > -#define ZR36057_JPC 0x104 /* JPEG Process Control */
> > > > -#define ZR36057_JPC_P_RESET BIT(7)
> > > > -#define ZR36057_JPC_COD_TRNS_EN BIT(5)
> > > > -#define ZR36057_JPC_ACTIVE BIT(0)
> > > > -
> > > > -#define ZR36057_VSP 0x108 /* Vertical Sync Parameters */
> > > > -#define ZR36057_VSP_VSYNC_SIZE 16
> > > > -#define ZR36057_VSP_FRM_TOT 0
> > > > -
> > > > -#define ZR36057_HSP 0x10c /* Horizontal Sync Parameters */
> > > > -#define ZR36057_HSP_HSYNC_START 16
> > > > -#define ZR36057_HSP_LINE_TOT 0
> > > > -
> > > > -#define ZR36057_FHAP 0x110 /* Field Horizontal Active Portion */
> > > > -#define ZR36057_FHAP_NAX 16
> > > > -#define ZR36057_FHAP_PAX 0
> > > > -
> > > > -#define ZR36057_FVAP 0x114 /* Field Vertical Active Portion */
> > > > -#define ZR36057_FVAP_NAY 16
> > > > -#define ZR36057_FVAP_PAY 0
> > > > -
> > > > -#define ZR36057_FPP 0x118 /* Field Process Parameters */
> > > > -#define ZR36057_FPP_ODD_EVEN BIT(0)
> > > > -
> > > > -#define ZR36057_JCBA 0x11c /* JPEG Code Base Address */
> > > > -
> > > > -#define ZR36057_JCFT 0x120 /* JPEG Code FIFO Threshold */
> > > > -
> > > > -#define ZR36057_JCGI 0x124 /* JPEG Codec Guest ID */
> > > > -#define ZR36057_JCGI_JPE_GUEST_ID 4
> > > > -#define ZR36057_JCGI_JPE_GUEST_REG 0
> > > > -
> > > > -#define ZR36057_GCR2 0x12c /* GuestBus Control Register (2) */
> > > > -
> > > > -#define ZR36057_POR 0x200 /* Post Office Register */
> > > > -#define ZR36057_POR_PO_PEN BIT(25)
> > > > -#define ZR36057_POR_PO_TIME BIT(24)
> > > > -#define ZR36057_POR_PO_DIR BIT(23)
> > > > -
> > > > -#define ZR36057_STR 0x300 /* "Still" Transfer Register */
> > > > +/* MPEG Code Memory Pointer Register */
> > > > +#define ZR36057_MCMPR 0x038
> > > > +
> > > > +/* Interrupt Status Register */
> > > > +#define ZR36057_ISR 0x03c
> > > > +#define ZR36057_ISR_GIRQ1 BIT(30)
> > > > +#define ZR36057_ISR_GIRQ0 BIT(29)
> > > > +#define ZR36057_ISR_COD_REP_IRQ BIT(28)
> > > > +#define ZR36057_ISR_JPEG_REP_IRQ BIT(27)
> > > > +
> > > > +/* Interrupt Control Register */
> > > > +#define ZR36057_ICR 0x040
> > > > +#define ZR36057_ICR_GIRQ1 BIT(30)
> > > > +#define ZR36057_ICR_GIRQ0 BIT(29)
> > > > +#define ZR36057_ICR_COD_REP_IRQ BIT(28)
> > > > +#define ZR36057_ICR_JPEG_REP_IRQ BIT(27)
> > > > +#define ZR36057_ICR_INT_PIN_EN BIT(24)
> > > > +
> > > > +/* I2C Bus Register */
> > > > +#define ZR36057_I2CBR 0x044
> > > > +#define ZR36057_I2CBR_SDA BIT(1)
> > > > +#define ZR36057_I2CBR_SCL BIT(0)
> > > > +
> > > > +/* JPEG Mode and Control */
> > > > +#define ZR36057_JMC 0x100
> > > > +#define ZR36057_JMC_JPG BIT(31)
> > > > +#define ZR36057_JMC_JPG_EXP_MODE (0 << 29)
> > > > +#define ZR36057_JMC_JPG_CMP_MODE BIT(29)
> > > > +#define ZR36057_JMC_MJPG_EXP_MODE (2 << 29)
> > > > +#define ZR36057_JMC_MJPG_CMP_MODE (3 << 29)
> > > > +#define ZR36057_JMC_RTBUSY_FB BIT(6)
> > > > +#define ZR36057_JMC_GO_EN BIT(5)
> > > > +#define ZR36057_JMC_SYNC_MSTR BIT(4)
> > > > +#define ZR36057_JMC_FLD_PER_BUFF BIT(3)
> > > > +#define ZR36057_JMC_VFIFO_FB BIT(2)
> > > > +#define ZR36057_JMC_CFIFO_FB BIT(1)
> > > > +#define ZR36057_JMC_STLL_LIT_ENDIAN BIT(0)
> > > > +
> > > > +/* JPEG Process Control */
> > > > +#define ZR36057_JPC 0x104
> > > > +#define ZR36057_JPC_P_RESET BIT(7)
> > > > +#define ZR36057_JPC_COD_TRNS_EN BIT(5)
> > > > +#define ZR36057_JPC_ACTIVE BIT(0)
> > > > +
> > > > +/* Vertical Sync Parameters */
> > > > +#define ZR36057_VSP 0x108
> > > > +#define ZR36057_VSP_VSYNC_SIZE 16
> > > > +#define ZR36057_VSP_FRM_TOT 0
> > > > +
> > > > +/* Horizontal Sync Parameters */
> > > > +#define ZR36057_HSP 0x10c
> > > > +#define ZR36057_HSP_HSYNC_START 16
> > > > +#define ZR36057_HSP_LINE_TOT 0
> > > > +
> > > > +/* Field Horizontal Active Portion */
> > > > +#define ZR36057_FHAP 0x110
> > > > +#define ZR36057_FHAP_NAX 16
> > > > +#define ZR36057_FHAP_PAX 0
> > > > +
> > > > +/* Field Vertical Active Portion */
> > > > +#define ZR36057_FVAP 0x114
> > > > +#define ZR36057_FVAP_NAY 16
> > > > +#define ZR36057_FVAP_PAY 0
> > > > +
> > > > +/* Field Process Parameters */
> > > > +#define ZR36057_FPP 0x118
> > > > +#define ZR36057_FPP_ODD_EVEN BIT(0)
> > > > +
> > > > +/* JPEG Code Base Address */
> > > > +#define ZR36057_JCBA 0x11c
> > > > +
> > > > +/* JPEG Code FIFO Threshold */
> > > > +#define ZR36057_JCFT 0x120
> > > > +
> > > > +/* JPEG Codec Guest ID */
> > > > +#define ZR36057_JCGI 0x124
> > > > +#define ZR36057_JCGI_JPE_GUEST_ID 4
> > > > +#define ZR36057_JCGI_JPE_GUEST_REG 0
> > > > +
> > > > +/* GuestBus Control Register (2) */
> > > > +#define ZR36057_GCR2 0x12c
> > > > +
> > > > +/* Post Office Register */
> > > > +#define ZR36057_POR 0x200
> > > > +#define ZR36057_POR_PO_PEN BIT(25)
> > > > +#define ZR36057_POR_PO_TIME BIT(24)
> > > > +#define ZR36057_POR_PO_DIR BIT(23)
> > > > +
> > > > +/* "Still" Transfer Register */
> > > > +#define ZR36057_STR 0x300
> > > >
> > > > #endif
> > > > --
> > > > 2.30.2
> > > >
> > > > --
> > > > You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@...glegroups.com.
> > > > To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/YHCgnP6Jr6TbjwUy%40kali.
> > > >
> >
> > --
> > You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@...glegroups.com.
> > To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/YHDR7VxighihfZd5%40kali.
> >
Powered by blists - more mailing lists