Message-ID: <2ffc9df4-f5d1-e093-6223-e6c705ef8688@roeck-us.net>
Date:   Sat, 10 Apr 2021 08:21:07 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Hans de Goede <hdegoede@...hat.com>,
        Thomas Weißschuh <linux@...ssschuh.net>,
        platform-driver-x86@...r.kernel.org,
        Mark Gross <mgross@...ux.intel.com>,
        linux-kernel@...r.kernel.org,
        Barnabás Pőcze <pobrn@...tonmail.com>,
        Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org
Cc:     Matthew Garrett <mjg59@...f.ucam.org>
Subject: Re: [PATCH v3] platform/x86: add Gigabyte WMI temperature driver

On 4/10/21 7:57 AM, Hans de Goede wrote:
> Hi,
> 
> On 4/10/21 4:40 PM, Thomas Weißschuh wrote:
>> Changes since v1:
>> * Incorporate feedback from Barnabás Pőcze
>>   * Use a WMI driver instead of a platform driver
>>   * Let the kernel manage the driver lifecycle
>>   * Fix errno/ACPI error confusion
>>   * Fix resource cleanup
>>   * Document reason for integer casting
>>
>> Changes since v2:
>> * Style cleanups
>> * Test for usability during probing
>> * DMI-based whitelist
>> * CC hwmon maintainers
>>
>> -- >8 --
>>
>> Tested with a X570 I Aorus Pro Wifi.
>> The mainboard contains an ITE IT8688E chip for management.
>> This chips is also handled by drivers/hwmon/i87.c but as it is also used
>> by the firmware itself it needs an ACPI driver.
>>
>> Unfortunately not all sensor registers are handled by the firmware and even
>> less are exposed via WMI.
>>
>> Signed-off-by: Thomas Weißschuh <linux@...ssschuh.net>
> 
> This looks good, one small nitpick:
> 
> I know this is a touchy subject for some, but we are trying to move away
> from the whitelist/blacklist naming where possible and we don't want to
> introduce any new cases, see:
> 
> https://github.com/torvalds/linux/blob/master/Documentation/process/coding-style.rst#4-naming
> 
> The driver currently uses this twice:
> "Force loading on non-whitelisted platform"
> "Forcing loading on non-whitelisted platform"
> 
> Interestingly enough you already avoided naming the dmi_system_id table
> a whitelist (good).
> 
> I would like to see "non-whitelisted" replaced with "unknown" so that we end up with:
> 
> "Force loading on unknown platform"
> "Forcing loading on unknown platform"
> 
> And while at it, I think for the second sentence this would be better English
> (I'm not a native speaker myself):
> 
> "Forcing load on unknown platform"
> 

Not native either, but I think it is either "Forcing load" or "Force loading".

> If you are ok with these changes I can fix this up while merging, no need
> to send a v4. Although if you prefer to send a v4 that is fine too.
> 

Please consider adding an existence check into the is_visible function.
Sysfs attributes for non-existing sensors should not be created.

Thanks,
Guenter

> Either way let me know.
> 
> Regards,
> 
> Hans
> 
> p.s.
> 
> For v4 or for a next patch, the way to add the changelog so that it does
> not get picked up / automatically gets snipped by git am is to put it
> below the Signed-off-by at the end of the commit message like this:
> 
> Signed-off-by: Thomas Weißschuh <linux@...ssschuh.net>
> ---
> Changes since v1:
> * Incorporate feedback from Barnabás Pőcze
>   * Use a WMI driver instead of a platform driver
>   * Let the kernel manage the driver lifecycle
>   * Fix errno/ACPI error confusion
>   * Fix resource cleanup
>   * Document reason for integer casting
>  
> Changes since v2:
> * Style cleanups
> * Test for usability during probing
> * DMI-based whitelist
> * CC hwmon maintainers
> 
> 
> 
> 
> 
> 
> 
>> ---
>>  MAINTAINERS                         |   6 +
>>  drivers/platform/x86/Kconfig        |  11 ++
>>  drivers/platform/x86/Makefile       |   1 +
>>  drivers/platform/x86/gigabyte-wmi.c | 194 ++++++++++++++++++++++++++++
>>  4 files changed, 212 insertions(+)
>>  create mode 100644 drivers/platform/x86/gigabyte-wmi.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d92f85ca831d..9c10cfc00fe8 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -7543,6 +7543,12 @@ F:	Documentation/filesystems/gfs2*
>>  F:	fs/gfs2/
>>  F:	include/uapi/linux/gfs2_ondisk.h
>>  
>> +GIGABYTE WMI DRIVER
>> +M:	Thomas Weißschuh <linux@...ssschuh.net>
>> +L:	platform-driver-x86@...r.kernel.org
>> +S:	Maintained
>> +F:	drivers/platform/x86/gigabyte-wmi.c
>> +
>>  GNSS SUBSYSTEM
>>  M:	Johan Hovold <johan@...nel.org>
>>  S:	Maintained
>> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>> index ad4e630e73e2..96622a2106f7 100644
>> --- a/drivers/platform/x86/Kconfig
>> +++ b/drivers/platform/x86/Kconfig
>> @@ -123,6 +123,17 @@ config XIAOMI_WMI
>>  	  To compile this driver as a module, choose M here: the module will
>>  	  be called xiaomi-wmi.
>>  
>> +config GIGABYTE_WMI
>> +	tristate "Gigabyte WMI temperature driver"
>> +	depends on ACPI_WMI
>> +	depends on HWMON
>> +	help
>> +	  Say Y here if you want to support WMI-based temperature reporting on
>> +	  Gigabyte mainboards.
>> +
>> +	  To compile this driver as a module, choose M here: the module will
>> +	  be called gigabyte-wmi.
>> +
>>  config ACERHDF
>>  	tristate "Acer Aspire One temperature and fan driver"
>>  	depends on ACPI && THERMAL
>> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
>> index 60d554073749..1621ebfd04fd 100644
>> --- a/drivers/platform/x86/Makefile
>> +++ b/drivers/platform/x86/Makefile
>> @@ -15,6 +15,7 @@ obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
>>  obj-$(CONFIG_MXM_WMI)			+= mxm-wmi.o
>>  obj-$(CONFIG_PEAQ_WMI)			+= peaq-wmi.o
>>  obj-$(CONFIG_XIAOMI_WMI)		+= xiaomi-wmi.o
>> +obj-$(CONFIG_GIGABYTE_WMI)		+= gigabyte-wmi.o
>>  
>>  # Acer
>>  obj-$(CONFIG_ACERHDF)		+= acerhdf.o
>> diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c
>> new file mode 100644
>> index 000000000000..fb4e6d4c1823
>> --- /dev/null
>> +++ b/drivers/platform/x86/gigabyte-wmi.c
>> @@ -0,0 +1,194 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + *  Copyright (C) 2021 Thomas Weißschuh <thomas@...ssschuh.net>
>> + */
>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +
>> +#include <linux/acpi.h>
>> +#include <linux/dmi.h>
>> +#include <linux/hwmon.h>
>> +#include <linux/module.h>
>> +#include <linux/wmi.h>
>> +
>> +#define GIGABYTE_WMI_GUID "DEADBEEF-2001-0000-00A0-C90629100000"
>> +#define NUM_TEMPERATURE_SENSORS 6
>> +
>> +static bool force_load;
>> +module_param(force_load, bool, 0);
>> +MODULE_PARM_DESC(force_load, "Force loading on non-whitelisted platform");
>> +
>> +enum gigabyte_wmi_commandtype {
>> +	GIGABYTE_WMI_BUILD_DATE_QUERY       =   0x1,
>> +	GIGABYTE_WMI_MAINBOARD_TYPE_QUERY   =   0x2,
>> +	GIGABYTE_WMI_FIRMWARE_VERSION_QUERY =   0x4,
>> +	GIGABYTE_WMI_MAINBOARD_NAME_QUERY   =   0x5,
>> +	GIGABYTE_WMI_TEMPERATURE_QUERY      = 0x125,
>> +};
>> +
>> +struct gigabyte_wmi_args {
>> +	u32 arg1;
>> +};
>> +
>> +static int gigabyte_wmi_perform_query(struct wmi_device *wdev,
>> +				      enum gigabyte_wmi_commandtype command,
>> +				      struct gigabyte_wmi_args *args, struct acpi_buffer *out)
>> +{
>> +	const struct acpi_buffer in = {
>> +		.length = sizeof(*args),
>> +		.pointer = args,
>> +	};
>> +
>> +	acpi_status ret = wmidev_evaluate_method(wdev, 0x0, command, &in, out);
>> +
>> +	if ACPI_FAILURE(ret)
>> +		return -EIO;
>> +
>> +	return 0;
>> +}
>> +
>> +static int gigabyte_wmi_query_integer(struct wmi_device *wdev,
>> +				      enum gigabyte_wmi_commandtype command,
>> +				      struct gigabyte_wmi_args *args, u64 *res)
>> +{
>> +	union acpi_object *obj;
>> +	struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL };
>> +	int ret;
>> +
>> +	ret = gigabyte_wmi_perform_query(wdev, command, args, &result);
>> +	if (ret)
>> +		return ret;
>> +	obj = result.pointer;
>> +	if (obj && obj->type == ACPI_TYPE_INTEGER)
>> +		*res = obj->integer.value;
>> +	else
>> +		ret = -EIO;
>> +	kfree(result.pointer);
>> +	return ret;
>> +}
>> +
>> +static int gigabyte_wmi_temperature(struct wmi_device *wdev, u8 sensor, long *res)
>> +{
>> +	struct gigabyte_wmi_args args = {
>> +		.arg1 = sensor,
>> +	};
>> +	u64 temp;
>> +	acpi_status ret;
>> +
>> +	ret = gigabyte_wmi_query_integer(wdev, GIGABYTE_WMI_TEMPERATURE_QUERY, &args, &temp);
>> +	if (ret == 0) {
>> +		if (temp == 0)
>> +			return -ENODEV;
>> +		*res = (s8)temp * 1000; // value is a signed 8-bit integer
>> +	}
>> +	return ret;
>> +}
>> +
>> +static int gigabyte_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>> +				   u32 attr, int channel, long *val)
>> +{
>> +	struct wmi_device *wdev = dev_get_drvdata(dev);
>> +
>> +	return gigabyte_wmi_temperature(wdev, channel, val);
>> +}
>> +
>> +static umode_t gigabyte_wmi_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
>> +					     u32 attr, int channel)
>> +{
>> +	return 0444;
>> +}
>> +
>> +static const struct hwmon_channel_info *gigabyte_wmi_hwmon_info[] = {
>> +	HWMON_CHANNEL_INFO(temp,
>> +			   HWMON_T_INPUT,
>> +			   HWMON_T_INPUT,
>> +			   HWMON_T_INPUT,
>> +			   HWMON_T_INPUT,
>> +			   HWMON_T_INPUT,
>> +			   HWMON_T_INPUT),
>> +	NULL
>> +};
>> +
>> +static const struct hwmon_ops gigabyte_wmi_hwmon_ops = {
>> +	.read = gigabyte_wmi_hwmon_read,
>> +	.is_visible = gigabyte_wmi_hwmon_is_visible,
>> +};
>> +
>> +static const struct hwmon_chip_info gigabyte_wmi_hwmon_chip_info = {
>> +	.ops = &gigabyte_wmi_hwmon_ops,
>> +	.info = gigabyte_wmi_hwmon_info,
>> +};
>> +
>> +static int gigabyte_wmi_validate_sensor_presence(struct wmi_device *wdev)
>> +{
>> +	int working_sensors = 0, i;
>> +	long temp;
>> +
>> +	for (i = 0; i < NUM_TEMPERATURE_SENSORS; i++) {
>> +		if (!gigabyte_wmi_temperature(wdev, i, &temp))
>> +			working_sensors++;
>> +	}
>> +	return working_sensors ? 0 : -ENODEV;
>> +}
>> +
>> +static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = {
>> +	{ .matches = {
>> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
>> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550 GAMING X V2"),
>> +	}},
>> +	{ .matches = {
>> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
>> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550M DS3H"),
>> +	}},
>> +	{ .matches = {
>> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
>> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "Z390 I AORUS PRO WIFI-CF"),
>> +	}},
>> +	{ .matches = {
>> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
>> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "X570 I AORUS PRO WIFI"),
>> +	}},
>> +	{ }
>> +};
>> +
>> +static int gigabyte_wmi_probe(struct wmi_device *wdev, const void *context)
>> +{
>> +	struct device *hwmon_dev;
>> +	int ret;
>> +
>> +	if (!dmi_check_system(gigabyte_wmi_known_working_platforms)) {
>> +		if (force_load)
>> +			dev_warn(&wdev->dev, "Forcing loading on non-whitelisted platform");
>> +		else
>> +			return -ENODEV;
>> +	}
>> +
>> +	ret = gigabyte_wmi_validate_sensor_presence(wdev);
>> +	if (ret) {
>> +		dev_info(&wdev->dev, "No temperature sensors usable");
>> +		return ret;
>> +	}
>> +
>> +	hwmon_dev = devm_hwmon_device_register_with_info(&wdev->dev, "gigabyte_wmi", wdev,
>> +							 &gigabyte_wmi_hwmon_chip_info, NULL);
>> +
>> +	return PTR_ERR_OR_ZERO(hwmon_dev);
>> +}
>> +
>> +static const struct wmi_device_id gigabyte_wmi_id_table[] = {
>> +	{ GIGABYTE_WMI_GUID, NULL },
>> +	{ }
>> +};
>> +
>> +static struct wmi_driver gigabyte_wmi_driver = {
>> +	.driver = {
>> +		.name = "gigabyte-wmi",
>> +	},
>> +	.id_table = gigabyte_wmi_id_table,
>> +	.probe = gigabyte_wmi_probe,
>> +};
>> +module_wmi_driver(gigabyte_wmi_driver);
>> +
>> +MODULE_DEVICE_TABLE(wmi, gigabyte_wmi_id_table);
>> +MODULE_AUTHOR("Thomas Weißschuh <thomas@...ssschuh.net>");
>> +MODULE_DESCRIPTION("Gigabyte WMI temperature Driver");
>> +MODULE_LICENSE("GPL");
>>
>> base-commit: 144c79ef33536b4ecb4951e07dbc1f2b7fa99d32
>>
> 

Powered by blists - more mailing lists