linux-kernel - [PATCH v1 3/3] pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210412140741.39946-3-andriy.shevchenko@linux.intel.com>
Date:   Mon, 12 Apr 2021 17:07:41 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        "Gustavo A. R. Silva" <gustavoars@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Drew Fustini <drew@...gleboard.org>,
        Tony Lindgren <tony@...mide.com>,
        Christophe JAILLET <christophe.jaillet@...adoo.fr>,
        Thierry Reding <treding@...dia.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
        linux-tegra@...r.kernel.org
Cc:     Vladimir Zapolskiy <vz@...ia.com>,
        Haojian Zhuang <haojian.zhuang@...aro.org>,
        Michal Simek <michal.simek@...inx.com>,
        Daniel Mack <daniel@...que.org>,
        Robert Jarzmik <robert.jarzmik@...e.fr>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>
Subject: [PATCH v1 3/3] pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param

It seems that we will have more and more pin controllers that support
PWM function on the (selected) pins. Due to it being a part of pin
controller IP the idea is to have some code that will switch the mode
and attach the corresponding driver, for example, via using it as
a library. Meanwhile, put a corresponding item to the pin_config_param
enumerator.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 include/linux/pinctrl/pinconf-generic.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 189e701832ea..e18ab3d5908f 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -80,6 +80,7 @@ struct pinctrl_map;
  *	operation, if several modes of operation are supported these can be
  *	passed in the argument on a custom form, else just use argument 1
  *	to indicate low power mode, argument 0 turns low power mode off.
+ * @PIN_CONFIG_MODE_PWM: this will configure the pin for PWM
  * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode
  * 	without driving a value there. For most platforms this reduces to
  * 	enable the output buffers and then let the pin controller current
@@ -125,6 +126,7 @@ enum pin_config_param {
 	PIN_CONFIG_INPUT_SCHMITT,
 	PIN_CONFIG_INPUT_SCHMITT_ENABLE,
 	PIN_CONFIG_MODE_LOW_POWER,
+	PIN_CONFIG_MODE_PWM,
 	PIN_CONFIG_OUTPUT_ENABLE,
 	PIN_CONFIG_OUTPUT,
 	PIN_CONFIG_PERSIST_STATE,
-- 
2.30.2