| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210412084014.192983489@linuxfoundation.org>
Date: Mon, 12 Apr 2021 10:38:50 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Hauke Mehrtens <hauke@...ke-m.de>,
Andrew Lunn <andrew@...n.ch>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 5.10 016/188] net: dsa: lantiq_gswip: Dont use PHY auto polling
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
commit 3e9005be87777afc902b9f5497495898202d335d upstream.
PHY auto polling on the GSWIP hardware can be used so link changes
(speed, link up/down, etc.) can be detected automatically. Internally
GSWIP reads the PHY's registers for this functionality. Based on this
automatic detection GSWIP can also automatically re-configure it's port
settings. Unfortunately this auto polling (and configuration) mechanism
seems to cause various issues observed by different people on different
devices:
- FritzBox 7360v2: the two Gbit/s ports (connected to the two internal
PHY11G instances) are working fine but the two Fast Ethernet ports
(using an AR8030 RMII PHY) are completely dead (neither RX nor TX are
received). It turns out that the AR8030 PHY sets the BMSR_ESTATEN bit
as well as the ESTATUS_1000_TFULL and ESTATUS_1000_XFULL bits. This
makes the PHY auto polling state machine (rightfully?) think that the
established link speed (when the other side is Gbit/s capable) is
1Gbit/s.
- None of the Ethernet ports on the Zyxel P-2812HNU-F1 (two are
connected to the internal PHY11G GPHYs while the other three are
external RGMII PHYs) are working. Neither RX nor TX traffic was
observed. It is not clear which part of the PHY auto polling state-
machine caused this.
- FritzBox 7412 (only one LAN port which is connected to one of the
internal GPHYs running in PHY22F / Fast Ethernet mode) was seeing
random disconnects (link down events could be seen). Sometimes all
traffic would stop after such disconnect. It is not clear which part
of the PHY auto polling state-machine cauased this.
- TP-Link TD-W9980 (two ports are connected to the internal GPHYs
running in PHY11G / Gbit/s mode, the other two are external RGMII
PHYs) was affected by similar issues as the FritzBox 7412 just without
the "link down" events
Switch to software based configuration instead of PHY auto polling (and
letting the GSWIP hardware configure the ports automatically) for the
following link parameters:
- link up/down
- link speed
- full/half duplex
- flow control (RX / TX pause)
After a big round of manual testing by various people (who helped test
this on OpenWrt) it turns out that this fixes all reported issues.
Additionally it can be considered more future proof because any
"quirk" which is implemented for a PHY on the driver side can now be
used with the GSWIP hardware as well because Linux is in control of the
link parameters.
As a nice side-effect this also solves a problem where fixed-links were
not supported previously because we were relying on the PHY auto polling
mechanism, which cannot work for fixed-links as there's no PHY from
where it can read the registers. Configuring the link settings on the
GSWIP ports means that we now use the settings from device-tree also for
ports with fixed-links.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Fixes: 3e6fdeb28f4c33 ("net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock")
Cc: stable@...r.kernel.org
Acked-by: Hauke Mehrtens <hauke@...ke-m.de>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/dsa/lantiq_gswip.c | 185 +++++++++++++++++++++++++++++++++++------
1 file changed, 159 insertions(+), 26 deletions(-)
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -190,6 +190,23 @@
#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA))
#define GSWIP_MAC_FLEN 0x8C5
+#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_0_PADEN BIT(8)
+#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7)
+#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070
+#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010
+#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020
+#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030
+#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040
+#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C
+#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004
+#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C
+#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003
+#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001
+#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002
#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
@@ -653,16 +670,13 @@ static int gswip_port_enable(struct dsa_
GSWIP_SDMA_PCTRLp(port));
if (!dsa_is_cpu_port(ds, port)) {
- u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO |
- GSWIP_MDIO_PHY_SPEED_AUTO |
- GSWIP_MDIO_PHY_FDUP_AUTO |
- GSWIP_MDIO_PHY_FCONTX_AUTO |
- GSWIP_MDIO_PHY_FCONRX_AUTO |
- (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK);
-
- gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port));
- /* Activate MDIO auto polling */
- gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0);
+ u32 mdio_phy = 0;
+
+ if (phydev)
+ mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
}
return 0;
@@ -675,14 +689,6 @@ static void gswip_port_disable(struct ds
if (!dsa_is_user_port(ds, port))
return;
- if (!dsa_is_cpu_port(ds, port)) {
- gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN,
- GSWIP_MDIO_PHY_LINK_MASK,
- GSWIP_MDIO_PHYp(port));
- /* Deactivate MDIO auto polling */
- gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0);
- }
-
gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
GSWIP_FDMA_PCTRLp(port));
gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
@@ -806,20 +812,31 @@ static int gswip_setup(struct dsa_switch
gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2);
gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3);
- /* disable PHY auto polling */
+ /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an
+ * interoperability problem with this auto polling mechanism because
+ * their status registers think that the link is in a different state
+ * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set
+ * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the
+ * auto polling state machine consider the link being negotiated with
+ * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads
+ * to the switch port being completely dead (RX and TX are both not
+ * working).
+ * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F
+ * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes
+ * it would work fine for a few minutes to hours and then stop, on
+ * other device it would no traffic could be sent or received at all.
+ * Testing shows that when PHY auto polling is disabled these problems
+ * go away.
+ */
gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0);
+
/* Configure the MDIO Clock 2.5 MHz */
gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
- for (i = 0; i < priv->hw_info->max_ports; i++) {
- /* Disable the xMII link */
+ /* Disable the xMII link */
+ for (i = 0; i < priv->hw_info->max_ports; i++)
gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
- /* Automatically select the xMII interface clock */
- gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK,
- GSWIP_MII_CFG_RATE_AUTO, i);
- }
-
/* enable special tag insertion on cpu port */
gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
GSWIP_FDMA_PCTRLp(cpu_port));
@@ -1469,6 +1486,112 @@ unsupported:
return;
}
+static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
+{
+ u32 mdio_phy;
+
+ if (link)
+ mdio_phy = GSWIP_MDIO_PHY_LINK_UP;
+ else
+ mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN;
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed,
+ phy_interface_t interface)
+{
+ u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0;
+
+ switch (speed) {
+ case SPEED_10:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_M10;
+
+ if (interface == PHY_INTERFACE_MODE_RMII)
+ mii_cfg = GSWIP_MII_CFG_RATE_M50;
+ else
+ mii_cfg = GSWIP_MII_CFG_RATE_M2P5;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+ break;
+
+ case SPEED_100:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_M100;
+
+ if (interface == PHY_INTERFACE_MODE_RMII)
+ mii_cfg = GSWIP_MII_CFG_RATE_M50;
+ else
+ mii_cfg = GSWIP_MII_CFG_RATE_M25;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+ break;
+
+ case SPEED_1000:
+ mdio_phy = GSWIP_MDIO_PHY_SPEED_G1;
+
+ mii_cfg = GSWIP_MII_CFG_RATE_M125;
+
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII;
+ break;
+ }
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port);
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0,
+ GSWIP_MAC_CTRL_0p(port));
+}
+
+static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex)
+{
+ u32 mac_ctrl_0, mdio_phy;
+
+ if (duplex == DUPLEX_FULL) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN;
+ mdio_phy = GSWIP_MDIO_PHY_FDUP_EN;
+ } else {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS;
+ mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS;
+ }
+
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0,
+ GSWIP_MAC_CTRL_0p(port));
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_pause(struct gswip_priv *priv, int port,
+ bool tx_pause, bool rx_pause)
+{
+ u32 mac_ctrl_0, mdio_phy;
+
+ if (tx_pause && rx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+ GSWIP_MDIO_PHY_FCONRX_EN;
+ } else if (tx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+ GSWIP_MDIO_PHY_FCONRX_DIS;
+ } else if (rx_pause) {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+ GSWIP_MDIO_PHY_FCONRX_EN;
+ } else {
+ mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE;
+ mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+ GSWIP_MDIO_PHY_FCONRX_DIS;
+ }
+
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK,
+ mac_ctrl_0, GSWIP_MAC_CTRL_0p(port));
+ gswip_mdio_mask(priv,
+ GSWIP_MDIO_PHY_FCONTX_MASK |
+ GSWIP_MDIO_PHY_FCONRX_MASK,
+ mdio_phy, GSWIP_MDIO_PHYp(port));
+}
+
static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
@@ -1525,6 +1648,9 @@ static void gswip_phylink_mac_link_down(
struct gswip_priv *priv = ds->priv;
gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port);
+
+ if (!dsa_is_cpu_port(ds, port))
+ gswip_port_set_link(priv, port, false);
}
static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -1536,6 +1662,13 @@ static void gswip_phylink_mac_link_up(st
{
struct gswip_priv *priv = ds->priv;
+ if (!dsa_is_cpu_port(ds, port)) {
+ gswip_port_set_link(priv, port, true);
+ gswip_port_set_speed(priv, port, speed, interface);
+ gswip_port_set_duplex(priv, port, duplex);
+ gswip_port_set_pause(priv, port, tx_pause, rx_pause);
+ }
+
gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port);
}
Powered by blists - more mailing lists