linux-kernel - [PATCH 5.10 031/188] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210412084014.686141907@linuxfoundation.org>
Date:   Mon, 12 Apr 2021 10:39:05 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Marek Behún <kabel@...nel.org>,
        Rui Salvaterra <rsalvaterra@...il.com>,
        Uwe Kleine-König <uwe@...ine-koenig.org>,
        linux-arm-kernel@...ts.infradead.org, Andrew Lunn <andrew@...n.ch>,
        Gregory CLEMENT <gregory.clement@...tlin.com>
Subject: [PATCH 5.10 031/188] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin

From: Marek Behún <kabel@...nel.org>

commit a26c56ae67fa9fbb45a8a232dcd7ebaa7af16086 upstream.

Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.

Without this the pin is by default in LED[2] mode, and the Marvell PHY
driver configures LED[2] into "On - Link, Blink - Activity" mode.

This fixes the issue where the pca9538 GPIO/interrupt controller (which
can't mask interrupts in HW) received too many interrupts and after a
time started ignoring the interrupt with error message:
  IRQ 71: nobody cared

There is a work in progress to have the Marvell PHY driver support
parsing PHY LED nodes from OF and registering the LEDs as Linux LED
class devices. Once this is done the PHY driver can also automatically
set the pin into INTn mode if it does not find LED[2] in OF.

Until then, though, we fix this via `marvell,reg-init` DT property.

Signed-off-by: Marek Behún <kabel@...nel.org>
Reported-by: Rui Salvaterra <rsalvaterra@...il.com>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: Uwe Kleine-König <uwe@...ine-koenig.org>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Gregory CLEMENT <gregory.clement@...tlin.com>
Cc: <stable@...r.kernel.org>
Tested-by: Rui Salvaterra <rsalvaterra@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@...tlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/arm/boot/dts/armada-385-turris-omnia.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -236,6 +236,7 @@
 		status = "okay";
 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};