[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210413174932.GE750651@xps15>
Date: Tue, 13 Apr 2021 11:49:32 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: peng.fan@....nxp.com
Cc: ohad@...ery.com, bjorn.andersson@...aro.org,
o.rempel@...gutronix.de, robh+dt@...nel.org,
devicetree@...r.kernel.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Peng Fan <peng.fan@....com>
Subject: Re: [PATCH V3 7/8] remoteproc: imx_rproc: support i.MX7ULP
On Thu, Apr 08, 2021 at 09:54:57AM +0800, peng.fan@....nxp.com wrote:
> From: Peng Fan <peng.fan@....com>
>
> i.MX7ULP A7 core runs under control of M4 core, M4 core starts by ROM
> and powers most serivces used by A7 core, so A7 core has no power to
> start and stop M4 core.
>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> drivers/remoteproc/imx_rproc.c | 25 ++++++++++++++++++++++---
> 1 file changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index a7fa9d7fc2d1..b911a7539897 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -147,6 +147,14 @@ static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> { 0x40000000, 0x40000000, 0x80000000, 0 },
> };
>
> +static const struct imx_rproc_att imx_rproc_att_imx7ulp[] = {
> + {0x1FFD0000, 0x1FFD0000, 0x30000, ATT_OWN},
> + {0x20000000, 0x20000000, 0x10000, ATT_OWN},
> + {0x2F000000, 0x2F000000, 0x20000, ATT_OWN},
> + {0x2F020000, 0x2F020000, 0x20000, ATT_OWN},
> + {0x60000000, 0x60000000, 0x40000000, 0}
> +};
> +
> static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
> /* dev addr , sys addr , size , flags */
> /* OCRAM_S (M4 Boot code) - alias */
> @@ -207,6 +215,12 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> .method = IMX_RPROC_MMIO,
> };
>
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx7ulp = {
> + .att = imx_rproc_att_imx7ulp,
> + .att_size = ARRAY_SIZE(imx_rproc_att_imx7ulp),
> + .method = IMX_RPROC_NONE,
> +};
> +
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
> .src_reg = IMX7D_SRC_SCR,
> .src_mask = IMX7D_M4_RST_MASK,
> @@ -598,12 +612,16 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
> return ret;
> }
>
> - if (!(val & dcfg->src_stop)) {
> - priv->rproc->state = RPROC_DETACHED;
> + if (!(val & dcfg->src_stop))
> priv->mode = IMX_RPROC_EARLY_BOOT;
> - }
> }
>
> + if (dcfg->method == IMX_RPROC_NONE)
> + priv->mode = IMX_RPROC_EARLY_BOOT;
As I pointed out there is no need for priv->mode. Just declare a boolean
variable that is local to this function and use it to determine the state of the
remote processor:
if (dcfg->method == IMX_RPROC_NONE)
early_boot = true;
if (early_boot)
priv->rproc->state = RPROC_DETACHED;
> +
> + if (priv->mode == IMX_RPROC_EARLY_BOOT)
> + priv->rproc->state = RPROC_DETACHED;
> +
> return 0;
> }
>
> @@ -724,6 +742,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id imx_rproc_of_match[] = {
> + { .compatible = "fsl,imx7ulp-cm4", .data = &imx_rproc_cfg_imx7ulp },
> { .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
> { .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
> { .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
> --
> 2.30.0
>
Powered by blists - more mailing lists