| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210413063514.23105-1-alex@ghiti.fr>
Date: Tue, 13 Apr 2021 02:35:14 -0400
From: Alexandre Ghiti <alex@...ti.fr>
To: Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arch@...r.kernel.org, linux-mm@...ck.org
Cc: Vitaly Wool <vitaly.wool@...sulko.com>,
Alexandre Ghiti <alex@...ti.fr>
Subject: [PATCH v8] RISC-V: enable XIP
From: Vitaly Wool <vitaly.wool@...sulko.com>
Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage. The physical flash address used
to link the kernel object files and for storing it has to be known
at compile time and is represented by a Kconfig option.
XIP on RISC-V will for the time being only work on MMU-enabled
kernels.
Signed-off-by: Alexandre Ghiti <alex@...ti.fr> [ Rebase on top of "Move
kernel mapping outside the linear mapping" ]
Signed-off-by: Vitaly Wool <vitaly.wool@...sulko.com>
---
arch/riscv/Kconfig | 55 +++++++++++-
arch/riscv/Makefile | 8 +-
arch/riscv/boot/Makefile | 13 +++
arch/riscv/include/asm/page.h | 21 +++++
arch/riscv/include/asm/pgtable.h | 25 +++++-
arch/riscv/kernel/head.S | 46 +++++++++-
arch/riscv/kernel/head.h | 3 +
arch/riscv/kernel/setup.c | 10 ++-
arch/riscv/kernel/vmlinux-xip.lds.S | 133 ++++++++++++++++++++++++++++
arch/riscv/kernel/vmlinux.lds.S | 6 ++
arch/riscv/mm/init.c | 115 ++++++++++++++++++++++--
11 files changed, 418 insertions(+), 17 deletions(-)
create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8ea60a0a19ae..7c7efdd67a10 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -28,7 +28,7 @@ config RISCV
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_SET_DIRECT_MAP
select ARCH_HAS_SET_MEMORY
- select ARCH_HAS_STRICT_KERNEL_RWX if MMU
+ select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
@@ -441,7 +441,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
- depends on OF
+ depends on OF && !XIP_KERNEL
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
@@ -465,11 +465,60 @@ config STACKPROTECTOR_PER_TASK
def_bool y
depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
+config PHYS_RAM_BASE_FIXED
+ bool "Explicitly specified physical RAM address"
+ default n
+
+config PHYS_RAM_BASE
+ hex "Platform Physical RAM address"
+ depends on PHYS_RAM_BASE_FIXED
+ default "0x80000000"
+ help
+ This is the physical address of RAM in the system. It has to be
+ explicitly specified to run early relocations of read-write data
+ from flash to RAM.
+
+config XIP_KERNEL
+ bool "Kernel Execute-In-Place from ROM"
+ depends on MMU && SPARSEMEM
+ select PHYS_RAM_BASE_FIXED
+ help
+ Execute-In-Place allows the kernel to run from non-volatile storage
+ directly addressable by the CPU, such as NOR flash. This saves RAM
+ space since the text section of the kernel is not loaded from flash
+ to RAM. Read-write sections, such as the data section and stack,
+ are still copied to RAM. The XIP kernel is not compressed since
+ it has to run directly from flash, so it will take more space to
+ store it. The flash address used to link the kernel object files,
+ and for storing it, is configuration dependent. Therefore, if you
+ say Y here, you must know the proper physical address where to
+ store the kernel image depending on your own flash memory usage.
+
+ Also note that the make target becomes "make xipImage" rather than
+ "make zImage" or "make Image". The final kernel binary to put in
+ ROM memory will be arch/riscv/boot/xipImage.
+
+ SPARSEMEM is required because the kernel text and rodata that are
+ flash resident are not backed by memmap, then any attempt to get
+ a struct page on those regions will trigger a fault.
+
+ If unsure, say N.
+
+config XIP_PHYS_ADDR
+ hex "XIP Kernel Physical Location"
+ depends on XIP_KERNEL
+ default "0x21000000"
+ help
+ This is the physical address in your flash memory the kernel will
+ be linked for and stored to. This address is dependent on your
+ own flash usage.
+
endmenu
config BUILTIN_DTB
- def_bool n
+ bool
depends on OF
+ default y if XIP_KERNEL
menu "Power management options"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 1368d943f1f3..8fcbec03974d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
# Default target when executing plain make
boot := arch/riscv/boot
+ifeq ($(CONFIG_XIP_KERNEL),y)
+KBUILD_IMAGE := $(boot)/xipImage
+else
KBUILD_IMAGE := $(boot)/Image.gz
+endif
head-y := arch/riscv/kernel/head.o
@@ -95,12 +99,14 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
KBUILD_IMAGE := $(boot)/loader.bin
else
KBUILD_IMAGE := $(boot)/Image.gz
endif
-BOOT_TARGETS := Image Image.gz loader loader.bin
+endif
+BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
all: $(notdir $(KBUILD_IMAGE))
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 03404c84f971..6bf299f70c27 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -17,8 +17,21 @@
KCOV_INSTRUMENT := n
OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
targets := Image Image.* loader loader.o loader.lds loader.bin
+targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+
+$(obj)/xipImage: vmlinux FORCE
+ $(call if_changed,mkxip)
+ @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
+
+endif
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 22cfb2be60dc..635c6b486806 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -91,6 +91,9 @@ typedef struct page *pgtable_t;
#ifdef CONFIG_MMU
extern unsigned long va_pa_offset;
extern unsigned long va_kernel_pa_offset;
+#ifdef CONFIG_XIP_KERNEL
+extern unsigned long va_kernel_xip_pa_offset;
+#endif
extern unsigned long pfn_base;
#define ARCH_PFN_OFFSET (pfn_base)
#else
@@ -102,11 +105,29 @@ extern unsigned long pfn_base;
extern unsigned long kernel_virt_addr;
#define linear_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + va_pa_offset))
+#ifdef CONFIG_XIP_KERNEL
+#define kernel_mapping_pa_to_va(y) ({ \
+ unsigned long _y = y; \
+ (_y >= CONFIG_PHYS_RAM_BASE) ? \
+ (void *)((unsigned long)(_y) + va_kernel_pa_offset + XIP_OFFSET) : \
+ (void *)((unsigned long)(_y) + va_kernel_xip_pa_offset); \
+ })
+#else
#define kernel_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + va_kernel_pa_offset))
+#endif
#define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
#define linear_mapping_va_to_pa(x) ((unsigned long)(x) - va_pa_offset)
+#ifdef CONFIG_XIP_KERNEL
+#define kernel_mapping_va_to_pa(y) ({ \
+ unsigned long _y = y; \
+ (_y < kernel_virt_addr + XIP_OFFSET) ? \
+ ((unsigned long)(_y) - va_kernel_xip_pa_offset) : \
+ ((unsigned long)(_y) - va_kernel_pa_offset - XIP_OFFSET); \
+ })
+#else
#define kernel_mapping_va_to_pa(x) ((unsigned long)(x) - va_kernel_pa_offset)
+#endif
#define __va_to_pa_nodebug(x) ({ \
unsigned long _x = x; \
(_x < kernel_virt_addr) ? \
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 80e63a93e903..c2dc4f83eed8 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -64,6 +64,19 @@
#define FIXADDR_SIZE PGDIR_SIZE
#endif
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#ifdef CONFIG_XIP_KERNEL
+#define XIP_OFFSET SZ_8M
+#define XIP_FIXUP(addr) ({ \
+ uintptr_t __a = (uintptr_t)(addr); \
+ (__a >= CONFIG_XIP_PHYS_ADDR && __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
+ __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET :\
+ __a; \
+ })
+#else
+#define XIP_FIXUP(addr) (addr)
+#endif /* CONFIG_XIP_KERNEL */
+
#endif
#ifndef __ASSEMBLY__
@@ -499,8 +512,16 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
#define kern_addr_valid(addr) (1) /* FIXME */
extern char _start[];
-extern void *dtb_early_va;
-extern uintptr_t dtb_early_pa;
+extern void *_dtb_early_va;
+extern uintptr_t _dtb_early_pa;
+#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
+#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
+#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
+#else
+#define dtb_early_va _dtb_early_va
+#define dtb_early_pa _dtb_early_pa
+#endif /* CONFIG_XIP_KERNEL */
+
void setup_bootmem(void);
void paging_init(void);
void misc_mem_init(void);
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 6cb05f22e52a..89cc58ab52b4 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -9,11 +9,23 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/csr.h>
#include <asm/hwcap.h>
#include <asm/image.h>
#include "efi-header.S"
+#ifdef CONFIG_XIP_KERNEL
+.macro XIP_FIXUP_OFFSET reg
+ REG_L t0, _xip_fixup
+ add \reg, \reg, t0
+.endm
+_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+#else
+.macro XIP_FIXUP_OFFSET reg
+.endm
+#endif /* CONFIG_XIP_KERNEL */
+
__HEAD
ENTRY(_start)
/*
@@ -70,6 +82,7 @@ pe_head_start:
relocate:
/* Relocate return address */
la a1, kernel_virt_addr
+ XIP_FIXUP_OFFSET a1
REG_L a1, 0(a1)
la a2, _start
sub a1, a1, a2
@@ -92,6 +105,7 @@ relocate:
* to ensure the new translations are in use.
*/
la a0, trampoline_pg_dir
+ XIP_FIXUP_OFFSET a0
srl a0, a0, PAGE_SHIFT
or a0, a0, a1
sfence.vma
@@ -145,7 +159,9 @@ secondary_start_sbi:
slli a3, a0, LGREG
la a4, __cpu_up_stack_pointer
+ XIP_FIXUP_OFFSET a4
la a5, __cpu_up_task_pointer
+ XIP_FIXUP_OFFSET a5
add a4, a3, a4
add a5, a3, a5
REG_L sp, (a4)
@@ -157,6 +173,7 @@ secondary_start_common:
#ifdef CONFIG_MMU
/* Enable virtual memory and relocate to virtual address */
la a0, swapper_pg_dir
+ XIP_FIXUP_OFFSET a0
call relocate
#endif
call setup_trap_vector
@@ -237,12 +254,33 @@ pmp_done:
.Lgood_cores:
#endif
+#ifndef CONFIG_XIP_KERNEL
/* Pick one hart to run the main boot sequence */
la a3, hart_lottery
li a2, 1
amoadd.w a3, a2, (a3)
bnez a3, .Lsecondary_start
+#else
+ /* hart_lottery in flash contains a magic number */
+ la a3, hart_lottery
+ mv a2, a3
+ XIP_FIXUP_OFFSET a2
+ lw t1, (a3)
+ amoswap.w t0, t1, (a2)
+ /* first time here if hart_lottery in RAM is not set */
+ beq t0, t1, .Lsecondary_start
+
+ la sp, _end + THREAD_SIZE
+ XIP_FIXUP_OFFSET sp
+ mv s0, a0
+ call __copy_data
+
+ /* Restore a0 copy */
+ mv a0, s0
+#endif
+
+#ifndef CONFIG_XIP_KERNEL
/* Clear BSS for flat non-ELF images */
la a3, __bss_start
la a4, __bss_stop
@@ -252,15 +290,18 @@ clear_bss:
add a3, a3, RISCV_SZPTR
blt a3, a4, clear_bss
clear_bss_done:
-
+#endif
/* Save hart ID and DTB physical address */
mv s0, a0
mv s1, a1
+
la a2, boot_cpu_hartid
+ XIP_FIXUP_OFFSET a2
REG_S a0, (a2)
/* Initialize page tables and relocate to virtual addresses */
la sp, init_thread_union + THREAD_SIZE
+ XIP_FIXUP_OFFSET sp
#ifdef CONFIG_BUILTIN_DTB
la a0, __dtb_start
#else
@@ -269,6 +310,7 @@ clear_bss_done:
call setup_vm
#ifdef CONFIG_MMU
la a0, early_pg_dir
+ XIP_FIXUP_OFFSET a0
call relocate
#endif /* CONFIG_MMU */
@@ -293,7 +335,9 @@ clear_bss_done:
slli a3, a0, LGREG
la a1, __cpu_up_stack_pointer
+ XIP_FIXUP_OFFSET a1
la a2, __cpu_up_task_pointer
+ XIP_FIXUP_OFFSET a2
add a1, a3, a1
add a2, a3, a2
diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
index b48dda3d04f6..aabbc3ac3e48 100644
--- a/arch/riscv/kernel/head.h
+++ b/arch/riscv/kernel/head.h
@@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
asmlinkage void do_page_fault(struct pt_regs *regs);
asmlinkage void __init setup_vm(uintptr_t dtb_pa);
+#ifdef CONFIG_XIP_KERNEL
+asmlinkage void __init __copy_data(void);
+#endif
extern void *__cpu_up_stack_pointer[];
extern void *__cpu_up_task_pointer[];
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 30e4af0fd50c..2ddf654c72bb 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
* This is used before the kernel initializes the BSS so it can't be in the
* BSS.
*/
-atomic_t hart_lottery __section(".sdata");
+atomic_t hart_lottery __section(".sdata")
+#ifdef CONFIG_XIP_KERNEL
+= ATOMIC_INIT(0xC001BEEF)
+#endif
+;
unsigned long boot_cpu_hartid;
static DEFINE_PER_CPU(struct cpu, cpu_devices);
@@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
#if IS_ENABLED(CONFIG_BUILTIN_DTB)
unflatten_and_copy_device_tree();
#else
- if (early_init_dt_verify(__va(dtb_early_pa)))
+ if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
unflatten_device_tree();
else
pr_err("No DTB found in kernel mappings\n");
@@ -266,7 +270,7 @@ void __init setup_arch(char **cmdline_p)
if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX))
protect_kernel_text_data();
-#if defined(CONFIG_64BIT) && defined(CONFIG_MMU)
+#if defined(CONFIG_64BIT) && defined(CONFIG_MMU) && !defined(CONFIG_XIP_KERNEL)
protect_kernel_linear_mapping_text_rodata();
#endif
diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000000..4b29b9917f99
--- /dev/null
+++ b/arch/riscv/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2020 Vitaly Wool, Konsulko AB
+ */
+
+#include <asm/pgtable.h>
+#define LOAD_OFFSET KERNEL_LINK_ADDR
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
+#include <asm/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ /* Beginning of code and text segment */
+ . = LOAD_OFFSET;
+ _xiprom = .;
+ _start = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+
+ .text : {
+ _text = .;
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ CPUIDLE_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ ENTRY_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ *(.fixup)
+ _etext = .;
+ }
+ RO_DATA(L1_CACHE_BYTES)
+ .srodata : {
+ *(.srodata*)
+ }
+ .init.rodata : {
+ INIT_SETUP(16)
+ INIT_CALLS
+ CON_INITCALL
+ INIT_RAM_FS
+ }
+ _exiprom = .; /* End of XIP ROM area */
+
+
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+ __data_loc = ALIGN(16); /* location in file */
+ . = LOAD_OFFSET + XIP_OFFSET; /* location in memory */
+
+ _sdata = .; /* Start of data section */
+ _data = .;
+ RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+ __start_ro_after_init = .;
+ .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+ *(.data..ro_after_init)
+ }
+ __end_ro_after_init = .;
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ .init.data : {
+ INIT_DATA
+ }
+ .exit.data : {
+ EXIT_DATA
+ }
+ . = ALIGN(8);
+ __soc_early_init_table : {
+ __soc_early_init_table_start = .;
+ KEEP(*(__soc_early_init_table))
+ __soc_early_init_table_end = .;
+ }
+ __soc_builtin_dtb_table : {
+ __soc_builtin_dtb_table_start = .;
+ KEEP(*(__soc_builtin_dtb_table))
+ __soc_builtin_dtb_table_end = .;
+ }
+ PERCPU_SECTION(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ .sdata : {
+ __global_pointer$ = . + 0x800;
+ *(.sdata*)
+ *(.sbss*)
+ }
+
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
+ EXCEPTION_TABLE(0x10)
+
+ .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
+ *(.rel.dyn*)
+ }
+
+ /*
+ * End of copied data. We need a dummy section to get its LMA.
+ * Also located before final ALIGN() as trailing padding is not stored
+ * in the resulting binary file and useless to copy.
+ */
+ .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+ _edata_loc = LOADADDR(.data.endmark);
+
+ . = ALIGN(PAGE_SIZE);
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS
+}
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 0726c05e0336..0a59b65cf789 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -4,8 +4,13 @@
* Copyright (C) 2017 SiFive
*/
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
#include <asm/pgtable.h>
#define LOAD_OFFSET KERNEL_LINK_ADDR
+
#include <asm/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/cache.h>
@@ -133,3 +138,4 @@ SECTIONS
DISCARDS
}
+#endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 093f3a96ecfc..d03e5e43d2d0 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -27,6 +27,9 @@
unsigned long kernel_virt_addr = KERNEL_LINK_ADDR;
EXPORT_SYMBOL(kernel_virt_addr);
+#ifdef CONFIG_XIP_KERNEL
+#define kernel_virt_addr (*((unsigned long *)XIP_FIXUP(&kernel_virt_addr)))
+#endif
unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
__page_aligned_bss;
@@ -34,8 +37,8 @@ EXPORT_SYMBOL(empty_zero_page);
extern char _start[];
#define DTB_EARLY_BASE_VA PGDIR_SIZE
-void *dtb_early_va __initdata;
-uintptr_t dtb_early_pa __initdata;
+void *_dtb_early_va __initdata;
+uintptr_t _dtb_early_pa __initdata;
struct pt_alloc_ops {
pte_t *(*get_pte_virt)(phys_addr_t pa);
@@ -118,6 +121,10 @@ void __init setup_bootmem(void)
phys_addr_t dram_end = memblock_end_of_DRAM();
phys_addr_t max_mapped_addr = __pa(~(ulong)0);
+#ifdef CONFIG_XIP_KERNEL
+ vmlinux_start = __pa_symbol(&_sdata);
+#endif
+
/* The maximal physical memory size is -PAGE_OFFSET. */
memblock_enforce_memory_limit(-PAGE_OFFSET);
@@ -159,15 +166,39 @@ void __init setup_bootmem(void)
memblock_allow_resize();
}
+#ifdef CONFIG_XIP_KERNEL
+
+extern char _xiprom[], _exiprom[];
+extern char _sdata[], _edata[];
+
+#endif /* CONFIG_XIP_KERNEL */
+
#ifdef CONFIG_MMU
-static struct pt_alloc_ops pt_ops;
+static struct pt_alloc_ops _pt_ops;
+
+#ifdef CONFIG_XIP_KERNEL
+#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
+#else
+#define pt_ops _pt_ops
+#endif
/* Offset between linear mapping virtual address and kernel load address */
unsigned long va_pa_offset;
EXPORT_SYMBOL(va_pa_offset);
+#ifdef CONFIG_XIP_KERNEL
+#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
+#endif
/* Offset between kernel mapping virtual address and kernel load address */
unsigned long va_kernel_pa_offset;
EXPORT_SYMBOL(va_kernel_pa_offset);
+#ifdef CONFIG_XIP_KERNEL
+#define va_kernel_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_pa_offset)))
+#endif
+unsigned long va_kernel_xip_pa_offset;
+EXPORT_SYMBOL(va_kernel_xip_pa_offset);
+#ifdef CONFIG_XIP_KERNEL
+#define va_kernel_xip_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_xip_pa_offset)))
+#endif
unsigned long pfn_base;
EXPORT_SYMBOL(pfn_base);
@@ -177,6 +208,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#ifdef CONFIG_XIP_KERNEL
+#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
+#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
+#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
+#endif /* CONFIG_XIP_KERNEL */
+
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
{
unsigned long addr = __fix_to_virt(idx);
@@ -252,6 +289,12 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
+#ifdef CONFIG_XIP_KERNEL
+#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
+#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
+#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
+#endif /* CONFIG_XIP_KERNEL */
+
static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
{
/* Before MMU is enabled */
@@ -368,6 +411,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
return PMD_SIZE;
}
+#ifdef CONFIG_XIP_KERNEL
+/* called from head.S with MMU off */
+asmlinkage void __init __copy_data(void)
+{
+ void *from = (void *)(&_sdata);
+ void *end = (void *)(&_end);
+ void *to = (void *)CONFIG_PHYS_RAM_BASE;
+ size_t sz = (size_t)(end - from + 1);
+
+ memcpy(to, from, sz);
+}
+#endif
+
/*
* setup_vm() is called from head.S with MMU-off.
*
@@ -387,7 +443,35 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
#endif
uintptr_t load_pa, load_sz;
+#ifdef CONFIG_XIP_KERNEL
+#define load_pa (*((uintptr_t *)XIP_FIXUP(&load_pa)))
+#define load_sz (*((uintptr_t *)XIP_FIXUP(&load_sz)))
+#endif
+
+#ifdef CONFIG_XIP_KERNEL
+uintptr_t xiprom, xiprom_sz;
+#define xiprom_sz (*((uintptr_t *)XIP_FIXUP(&xiprom_sz)))
+#define xiprom (*((uintptr_t *)XIP_FIXUP(&xiprom)))
+static void __init create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size)
+{
+ uintptr_t va, end_va;
+
+ /* Map the flash resident part */
+ end_va = kernel_virt_addr + xiprom_sz;
+ for (va = kernel_virt_addr; va < end_va; va += map_size)
+ create_pgd_mapping(pgdir, va,
+ xiprom + (va - kernel_virt_addr),
+ map_size, PAGE_KERNEL_EXEC);
+
+ /* Map the data in RAM */
+ end_va = kernel_virt_addr + XIP_OFFSET + load_sz;
+ for (va = kernel_virt_addr + XIP_OFFSET; va < end_va; va += map_size)
+ create_pgd_mapping(pgdir, va,
+ load_pa + (va - (kernel_virt_addr + XIP_OFFSET)),
+ map_size, PAGE_KERNEL);
+}
+#else
static void __init create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size)
{
uintptr_t va, end_va;
@@ -398,16 +482,28 @@ static void __init create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size)
load_pa + (va - kernel_virt_addr),
map_size, PAGE_KERNEL_EXEC);
}
+#endif
asmlinkage void __init setup_vm(uintptr_t dtb_pa)
{
- uintptr_t pa;
+ uintptr_t __maybe_unused pa;
uintptr_t map_size;
#ifndef __PAGETABLE_PMD_FOLDED
pmd_t fix_bmap_spmd, fix_bmap_epmd;
#endif
+
+#ifdef CONFIG_XIP_KERNEL
+ xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
+ xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
+
+ load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
+ load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
+
+ va_kernel_xip_pa_offset = kernel_virt_addr - xiprom;
+#else
load_pa = (uintptr_t)(&_start);
load_sz = (uintptr_t)(&_end) - load_pa;
+#endif
va_pa_offset = PAGE_OFFSET - load_pa;
va_kernel_pa_offset = kernel_virt_addr - load_pa;
@@ -441,8 +537,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
/* Setup trampoline PGD and PMD */
create_pgd_mapping(trampoline_pg_dir, kernel_virt_addr,
(uintptr_t)trampoline_pmd, PGDIR_SIZE, PAGE_TABLE);
+#ifdef CONFIG_XIP_KERNEL
+ create_pmd_mapping(trampoline_pmd, kernel_virt_addr,
+ xiprom, PMD_SIZE, PAGE_KERNEL_EXEC);
+#else
create_pmd_mapping(trampoline_pmd, kernel_virt_addr,
load_pa, PMD_SIZE, PAGE_KERNEL_EXEC);
+#endif
#else
/* Setup trampoline PGD */
create_pgd_mapping(trampoline_pg_dir, kernel_virt_addr,
@@ -474,7 +575,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
* whereas dtb_early_va will be used before setup_vm_final installs
* the linear mapping.
*/
- dtb_early_va = kernel_mapping_pa_to_va(dtb_pa);
+ dtb_early_va = kernel_mapping_pa_to_va(XIP_FIXUP(dtb_pa));
#endif /* CONFIG_BUILTIN_DTB */
#else
#ifndef CONFIG_BUILTIN_DTB
@@ -486,7 +587,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
#else /* CONFIG_BUILTIN_DTB */
- dtb_early_va = kernel_mapping_pa_to_va(dtb_pa);
+ dtb_early_va = kernel_mapping_pa_to_va(XIP_FIXUP(dtb_pa));
#endif /* CONFIG_BUILTIN_DTB */
#endif
dtb_early_pa = dtb_pa;
@@ -522,7 +623,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
#endif
}
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
void protect_kernel_linear_mapping_text_rodata(void)
{
unsigned long text_start = (unsigned long)lm_alias(_start);
--
2.20.1
Powered by blists - more mailing lists