[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1618326076-6869-1-git-send-email-michal.vokac@ysoft.com>
Date: Tue, 13 Apr 2021 17:01:16 +0200
From: Michal Vokáč <michal.vokac@...ft.com>
To: Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>
Cc: Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michal Vokáč <michal.vokac@...ft.com>
Subject: [PATCH] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset
The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
The display consist of a 128x64 OLED panel and a SSD1305 controller.
The OLED panel resolution is 128x64 but the built-in controller default
resolution is 132x64. To display properly a segment offset needs to be
configured.
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 51972c85e207..111d4d331f98 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -373,6 +373,7 @@
solomon,height = <64>;
solomon,width = <128>;
solomon,page-offset = <0>;
+ solomon,col-offset = <4>;
solomon,prechargep2 = <15>;
reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
vbat-supply = <&sw2_reg>;
--
2.1.4
Powered by blists - more mailing lists