linux-kernel - [PATCH v3 1/5] dt-bindings: media: max9286: Define 'maxim,gpio-poc'

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210414135128.180980-2-jacopo+renesas@jmondi.org>
Date:   Wed, 14 Apr 2021 15:51:24 +0200
From:   Jacopo Mondi <jacopo+renesas@...ndi.org>
To:     Geert Uytterhoeven <geert+renesas@...der.be>,
        Magnus Damm <magnus.damm@...il.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Kieran Bingham <kieran.bingham@...asonboard.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Jacopo Mondi <jacopo+renesas@...ndi.org>,
        linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/5] dt-bindings: media: max9286: Define 'maxim,gpio-poc'

Define a new vendor property in the maxim,max9286 binding schema.

The new property allows to declare that the remote camera
power-over-coax is controlled by one of the MAX9286 gpio lines.

As it is currently not possible to establish a regulator as consumer
of the MAX9286 gpio controller for this purpose, the property allows to
declare that the camera power is controlled by the MAX9286 directly.

The property accepts a gpio-index (0 or 1) and one line polarity
flag as defined by dt-bindings/gpio/gpio.h.

Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
---
 .../bindings/media/i2c/maxim,max9286.yaml     | 53 ++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..480a491f3744 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -70,6 +70,24 @@ properties:
       a remote serializer whose high-threshold noise immunity is not enabled
       is 100000 micro volts
 
+  maxim,gpio-poc:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    minItems: 2
+    maxItems: 2
+    description: |
+      Identifier of gpio line that controls Power over Coax to the cameras and
+      the associated polarity flag (GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW)
+      as defined in <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -182,7 +200,6 @@ required:
   - reg
   - ports
   - i2c-mux
-  - gpio-controller
 
 additionalProperties: false
 
@@ -327,4 +344,38 @@ examples:
           };
         };
       };
+
+      /*
+       * Example of a deserializer that controls the camera Power over Coax
+       * through one of its gpio lines.
+       */
+      gmsl-deserializer@6c {
+        compatible = "maxim,max9286";
+        reg = <0x6c>;
+        enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+        /*
+         * The remote camera power is controlled by MAX9286 GPIO line #0.
+         * No 'poc-supply' nor 'gpio-controller' are specified.
+         */
+        maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+        /*
+         * Do not describe connections as they're the same as in the previous
+         * example.
+         */
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@4 {
+            reg = <4>;
+          };
+        };
+
+        i2c-mux {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
     };
-- 
2.31.1