[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210415162209.GA1510914@robh.at.kernel.org>
Date: Thu, 15 Apr 2021 11:22:09 -0500
From: Rob Herring <robh@...nel.org>
To: Badhri Jagan Sridharan <badhri@...gle.com>
Cc: Guenter Roeck <linux@...ck-us.net>, linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org, Kyle Tso <kyletso@...gle.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Adam Thomson <Adam.Thomson.Opensource@...semi.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v4 3/3] dt-bindings: connector: Add slow-charger-loop
definition
On Wed, 14 Apr 2021 07:26:56 -0700, Badhri Jagan Sridharan wrote:
> Allows PMIC charger loops which are slow(i.e. cannot meet the
> 15ms deadline) to still comply to pSnkStby i.e Maximum power
> that can be consumed by sink while in Sink Standby state as defined
> in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
> Revision 3.0, Version 1.2.
>
> This patch introduces slow-charger-loop which when set makes
> the port request PD_P_SNK_STDBY_MW(2.5W i.e 500mA@5V) upon entering
> SNK_DISCOVERY (instead of 3A or the 1.5A during SNK_DISCOVERY) and the
> actual currrent limit after RX of PD_CTRL_PSRDY for PD link or during
> SNK_READY for non-pd link.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@...gle.com>
> ---
> Changes since v3:
> * Removed additional semi-colon in the subject line
> Changes since V2:
> To address Rob's comments
> * Updated commit and the binding description.
> * Updated subject as well.
> ---
> .../devicetree/bindings/connector/usb-connector.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
Acked-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists