[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210419072229.GA4869@dell>
Date: Mon, 19 Apr 2021 08:22:29 +0100
From: Lee Jones <lee.jones@...aro.org>
To: ChiYuan Huang <u0084500@...il.com>
Cc: lgirdwood@...il.com, Mark Brown <broonie@...nel.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
jingoohan1@...il.com, b.zolnierkie@...sung.com,
dri-devel@...ts.freedesktop.org, linux-fbdev@...r.kernel.org,
lkml <linux-kernel@...r.kernel.org>,
ChiYuan Huang <cy_huang@...htek.com>
Subject: Re: [PATCH v6 1/4] mfd: rt4831: Adds support for Richtek RT4831
On Mon, 19 Apr 2021, ChiYuan Huang wrote:
> Hi, Linux mfd reviewers:
> It's been three weeks not to get any response from you.
> Is there something wrong about this mfd patch?
> If yes, please feel free to let me know.
Couple of things:
First, if you think a patch had fallen through the gaps, which does
happen sometimes, it is generally considered acceptable to submit a
[RESEND] ~2 weeks after the initial submission. FYI: This was such a
patch. It was not on, or had fallen off of my radar for some reason.
Secondly, we are really late in the release cycle. -rc8 has just been
released. Quite a few maintainers slow down at ~-rc6. Particularly
for new drivers.
No need to resubmit this driver this time. It is now on my to-review
list and I will tend to it shortly.
Thanks for your patience.
> cy_huang <u0084500@...il.com> 於 2021年3月28日 週日 下午11:24寫道:
> >
> > From: ChiYuan Huang <cy_huang@...htek.com>
> >
> > This adds support Richtek RT4831 core. It includes four channel WLED driver
> > and Display Bias Voltage outputs.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@...htek.com>
> > ---
> > The RT4831 regulator patches are already on main stream, and can be referred to
> > 9351ab8b0cb6 regulator: rt4831: Adds support for Richtek RT4831 DSV regulator
> > 934b05e81862 regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator
> >
> > since v6
> > - Respin the date from 2020 to 2021.
> > - Rmove the shutdown routine.
> > - Change the macro OF_MFD_CELL to MFD_CELL_OF.
> >
> >
> > since v5
> > - Rename file name from rt4831-core.c to rt4831.c
> > - Change RICHTEK_VID to RICHTEK_VENDOR_ID.
> > - Change gpio_desc nameing from 'enable' to 'enable_gpio' in probe.
> > - Change variable 'val' to the meaningful name 'chip_id'.
> > - Refine the error log when vendor id is not matched.
> > - Remove of_match_ptr.
> >
> > since v2
> > - Refine Kconfig descriptions.
> > - Add copyright.
> > - Refine error logs in probe.
> > - Refine comment lines in remove and shutdown.
> > ---
> > drivers/mfd/Kconfig | 10 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/rt4831.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 126 insertions(+)
> > create mode 100644 drivers/mfd/rt4831.c
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists