[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210420132614.150242-3-jitao.shi@mediatek.com>
Date: Tue, 20 Apr 2021 21:26:12 +0800
From: Jitao Shi <jitao.shi@...iatek.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
<dri-devel@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>
CC: <linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <yingjoe.chen@...iatek.com>,
<eddie.huang@...iatek.com>, <cawa.cheng@...iatek.com>,
<bibby.hsieh@...iatek.com>, <ck.hu@...iatek.com>,
<stonea168@....com>, <huijuan.xie@...iatek.com>,
<rex-bc.chen@...iatek.com>, Jitao Shi <jitao.shi@...iatek.com>
Subject: [PATCH 3/4] drm/mediatek: fine tune the dsi panel's power sequence
Add the drm_panel_prepare_power and drm_panel_unprepare_power control.
Turn on panel power(drm_panel_prepare_power) and control before dsi
enable. And then dsi enable, send dcs cmd in drm_panel_prepare, last
turn on backlight.
Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a1ff152ef468..455fe582c6b5 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -615,10 +615,13 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel,
dsi->lanes);
+ if (panel_bridge_prepare_power(dsi->next_bridge))
+ DRM_INFO("can't prepare power the panel\n");
+
ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
if (ret < 0) {
dev_err(dev, "Failed to set data rate: %d\n", ret);
- goto err_refcount;
+ goto err_prepare_power;
}
phy_power_on(dsi->phy);
@@ -661,7 +664,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
clk_disable_unprepare(dsi->engine_clk);
err_phy_power_off:
phy_power_off(dsi->phy);
-err_refcount:
+err_prepare_power:
+ if (panel_bridge_unprepare_power(dsi->next_bridge))
+ DRM_INFO("Can't unprepare power the panel\n");
dsi->refcount--;
return ret;
}
@@ -694,6 +699,9 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
clk_disable_unprepare(dsi->digital_clk);
phy_power_off(dsi->phy);
+
+ if (panel_bridge_unprepare_power(dsi->next_bridge))
+ DRM_INFO("Can't unprepare power the panel\n");
}
static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
--
2.25.1
Powered by blists - more mailing lists