| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MWHPR02MB2623DED0785A05A9C55C20FBC2489@MWHPR02MB2623.namprd02.prod.outlook.com>
Date: Tue, 20 Apr 2021 13:36:51 +0000
From: Nava kishore Manne <navam@...inx.com>
To: Greg KH <gregkh@...uxfoundation.org>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
Michal Simek <michals@...inx.com>,
Derek Kiernan <dkiernan@...inx.com>,
Dragan Cvetic <draganc@...inx.com>,
"arnd@...db.de" <arnd@...db.de>, Rajan Vaja <RAJANV@...inx.com>,
Jolly Shah <JOLLYS@...inx.com>,
Tejas Patel <tejasp@...x.xilinx.com>,
Amit Sunil Dhamne <amitsuni@...inx.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"chinnikishore369@...il.com" <chinnikishore369@...il.com>,
git <git@...inx.com>
Subject: RE: [PATCH 2/5] misc: zynq: Add afi config driver
Hi Greg,
Please find my response inline.
> -----Original Message-----
> From: Greg KH <gregkh@...uxfoundation.org>
> Sent: Tuesday, April 20, 2021 2:17 PM
> To: Nava kishore Manne <navam@...inx.com>
> Cc: robh+dt@...nel.org; Michal Simek <michals@...inx.com>; Derek Kiernan
> <dkiernan@...inx.com>; Dragan Cvetic <draganc@...inx.com>;
> arnd@...db.de; Rajan Vaja <RAJANV@...inx.com>; Jolly Shah
> <JOLLYS@...inx.com>; Tejas Patel <tejasp@...x.xilinx.com>; Amit Sunil
> Dhamne <amitsuni@...inx.com>; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> chinnikishore369@...il.com; git <git@...inx.com>
> Subject: Re: [PATCH 2/5] misc: zynq: Add afi config driver
>
> On Tue, Apr 20, 2021 at 01:41:50PM +0530, Nava kishore Manne wrote:
> > This patch adds zynq afi config driver. This is useful for the
> > configuration of the PS-PL interface on zynq platform.
>
> What is "PS-PL"? Can you describe it better please?
>
PS-PL interface is nothing but the interface between processing system(PS) that contains arm cores and Programmable Logic(PL) i.e FPGA.
Will update the description in v2.
> >
> > Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
> > ---
> > drivers/misc/Kconfig | 11 ++++++
> > drivers/misc/Makefile | 1 +
> > drivers/misc/zynq-afi.c | 81
> > +++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 93 insertions(+)
> > create mode 100644 drivers/misc/zynq-afi.c
> >
> > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index
> > f532c59bb59b..877b43b3377d 100644
> > --- a/drivers/misc/Kconfig
> > +++ b/drivers/misc/Kconfig
> > @@ -445,6 +445,17 @@ config HISI_HIKEY_USB
> > switching between the dual-role USB-C port and the USB-A host
> ports
> > using only one USB controller.
> >
> > +config ZYNQ_AFI
> > + tristate "Xilinx ZYNQ AFI support"
> > + help
> > + Zynq AFI driver support for writing to the AFI registers
> > + for configuring PS_PL Bus-width. Xilinx Zynq SoC connect
> > + the PS to the programmable logic (PL) through the AXI port.
> > + This AXI port helps to establish the data path between the
> > + PS and PL.In-order to establish the proper communication path
> > + between PS and PL, the AXI port data path should be configured
> > + with the proper Bus-width values
> > +
> > source "drivers/misc/c2port/Kconfig"
> > source "drivers/misc/eeprom/Kconfig"
> > source "drivers/misc/cb710/Kconfig"
> > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index
> > 99b6f15a3c70..e9b03843100f 100644
> > --- a/drivers/misc/Makefile
> > +++ b/drivers/misc/Makefile
> > @@ -56,3 +56,4 @@ obj-$(CONFIG_HABANA_AI) +=
> habanalabs/
> > obj-$(CONFIG_UACCE) += uacce/
> > obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
> > obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
> > +obj-$(CONFIG_ZYNQ_AFI) += zynq-afi.o
> > diff --git a/drivers/misc/zynq-afi.c b/drivers/misc/zynq-afi.c new
> > file mode 100644 index 000000000000..04317d1bdb98
> > --- /dev/null
> > +++ b/drivers/misc/zynq-afi.c
> > @@ -0,0 +1,81 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Xilinx ZYNQ AFI driver.
> > + * Copyright (c) 2018-2021 Xilinx Inc.
> > + */
> > +
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +/* Registers and special values for doing register-based operations */
> > +#define AFI_RDCHAN_CTRL_OFFSET 0x00
> > +#define AFI_WRCHAN_CTRL_OFFSET 0x14
> > +
> > +#define AFI_BUSWIDTH_MASK 0x01
> > +
> > +/**
> > + * struct afi_fpga - AFI register description
> > + * @membase: pointer to register struct
> > + * @afi_width: AFI bus width to be written
> > + */
> > +struct zynq_afi_fpga {
> > + void __iomem *membase;
> > + u32 afi_width;
> > +};
> > +
> > +static int zynq_afi_fpga_probe(struct platform_device *pdev) {
> > + struct zynq_afi_fpga *afi_fpga;
> > + struct resource *res;
> > + u32 reg_val;
> > + u32 val;
> > +
> > + afi_fpga = devm_kzalloc(&pdev->dev, sizeof(*afi_fpga),
> GFP_KERNEL);
> > + if (!afi_fpga)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + afi_fpga->membase = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(afi_fpga->membase))
> > + return PTR_ERR(afi_fpga->membase);
> > +
> > + val = device_property_read_u32(&pdev->dev, "xlnx,afi-width",
> > + &afi_fpga->afi_width);
> > + if (val) {
> > + dev_err(&pdev->dev, "failed to get the afi bus width\n");
> > + return -EINVAL;
> > + }
> > +
> > + reg_val = readl(afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > + writel(reg_val | afi_fpga->afi_width,
> > + afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > + reg_val = readl(afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > + writel(reg_val | afi_fpga->afi_width,
> > + afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > +
> > + return 0;
> > +}
>
> I do not understand, why is this driver needed at all? Why can't you do the
> above from userspace?
>
> All this does is write some values to the hardware at probe time, who needs
> this?
This driver will be used by the overlay framework for configuring the interface after programming the FPGA and before probing the drivers that are present in the PL.
Regards,
Navakishore.
Powered by blists - more mailing lists