[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210421042834.27309-1-samuel@sholland.org>
Date: Tue, 20 Apr 2021 23:28:32 -0500
From: Samuel Holland <samuel@...lland.org>
To: Maxime Ripard <mripard@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Andre Przywara <andre.przywara@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev,
Samuel Holland <samuel@...lland.org>
Subject: [PATCH 0/2] Allwinner H6 USB3 device tree updates
While implementing support for this USB controller in U-Boot, I noticed
that the reset line alsp affects they PHY. It looks like most platforms
use a separate glue node to represent this, and in fact there is already
a compatible for the H6 listed in drivers/usb/dwc3/dwc3-of-simple.c.
Since this layout matches the usual way of modeling this hardware, it
allows using the existing drivers without adding platform-specific code.
Samuel Holland (2):
dt-bindings: usb: Document the Allwinner H6 DWC3 glue
arm64: dts: allwinner: h6: Wrap DWC3 and PHY in glue layer
.../usb/allwinner,sun50i-h6-dwc3.yaml | 75 +++++++++++++++++++
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 6 +-
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 6 +-
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +--
.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 6 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 60 ++++++++-------
6 files changed, 115 insertions(+), 47 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml
--
2.26.3
Powered by blists - more mailing lists