| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210421010205.GH4440@xz-x1>
Date: Tue, 20 Apr 2021 21:02:05 -0400
From: Peter Xu <peterx@...hat.com>
To: Axel Rasmussen <axelrasmussen@...gle.com>
Cc: Alexander Viro <viro@...iv.linux.org.uk>,
Andrea Arcangeli <aarcange@...hat.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Hugh Dickins <hughd@...gle.com>,
Jerome Glisse <jglisse@...hat.com>,
Joe Perches <joe@...ches.com>,
Lokesh Gidra <lokeshgidra@...gle.com>,
Mike Kravetz <mike.kravetz@...cle.com>,
Mike Rapoport <rppt@...ux.vnet.ibm.com>,
Shaohua Li <shli@...com>, Shuah Khan <shuah@...nel.org>,
Stephen Rothwell <sfr@...b.auug.org.au>,
Wang Qing <wangqing@...o.com>, linux-api@...r.kernel.org,
linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-kselftest@...r.kernel.org, linux-mm@...ck.org,
Brian Geffon <bgeffon@...gle.com>,
"Dr . David Alan Gilbert" <dgilbert@...hat.com>,
Mina Almasry <almasrymina@...gle.com>,
Oliver Upton <oupton@...gle.com>
Subject: Re: [PATCH v4 09/10] userfaultfd/shmem: modify
shmem_mcopy_atomic_pte to use install_pte()
On Tue, Apr 20, 2021 at 03:08:03PM -0700, Axel Rasmussen wrote:
> In a previous commit, we added the mcopy_atomic_install_pte() helper.
> This helper does the job of setting up PTEs for an existing page, to map
> it into a given VMA. It deals with both the anon and shmem cases, as
> well as the shared and private cases.
>
> In other words, shmem_mcopy_atomic_pte() duplicates a case it already
> handles. So, expose it, and let shmem_mcopy_atomic_pte() use it
> directly, to reduce code duplication.
>
> This requires that we refactor shmem_mcopy_atomic_pte() a bit:
>
> Instead of doing accounting (shmem_recalc_inode() et al) part-way
> through the PTE setup, do it beforehand. This frees up
> mcopy_atomic_install_pte() from having to care about this accounting,
> but it does mean we need to clean it up if we get a failure afterwards
> (shmem_uncharge()).
>
> We can *almost* use shmem_charge() to do this, reducing code
> duplication. But, it does `inode->i_mapping->nrpages++`, which would
> double-count since shmem_add_to_page_cache() also does this.
Missing to mention the lru_cache_add() replacement comment as Hugh commented on
this?
>
> Signed-off-by: Axel Rasmussen <axelrasmussen@...gle.com>
> ---
> include/linux/userfaultfd_k.h | 5 ++++
> mm/shmem.c | 53 ++++++++---------------------------
> mm/userfaultfd.c | 17 ++++-------
> 3 files changed, 22 insertions(+), 53 deletions(-)
>
> diff --git a/include/linux/userfaultfd_k.h b/include/linux/userfaultfd_k.h
> index 794d1538b8ba..39c094cc6641 100644
> --- a/include/linux/userfaultfd_k.h
> +++ b/include/linux/userfaultfd_k.h
> @@ -53,6 +53,11 @@ enum mcopy_atomic_mode {
> MCOPY_ATOMIC_CONTINUE,
> };
>
> +extern int mcopy_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
> + struct vm_area_struct *dst_vma,
> + unsigned long dst_addr, struct page *page,
> + bool newly_allocated, bool wp_copy);
> +
> extern ssize_t mcopy_atomic(struct mm_struct *dst_mm, unsigned long dst_start,
> unsigned long src_start, unsigned long len,
> bool *mmap_changing, __u64 mode);
> diff --git a/mm/shmem.c b/mm/shmem.c
> index 30c0bb501dc9..9bfa80fcd414 100644
> --- a/mm/shmem.c
> +++ b/mm/shmem.c
> @@ -2378,10 +2378,8 @@ int shmem_mcopy_atomic_pte(struct mm_struct *dst_mm,
> struct address_space *mapping = inode->i_mapping;
> gfp_t gfp = mapping_gfp_mask(mapping);
> pgoff_t pgoff = linear_page_index(dst_vma, dst_addr);
> - spinlock_t *ptl;
> void *page_kaddr;
> struct page *page;
> - pte_t _dst_pte, *dst_pte;
> int ret;
> pgoff_t max_off;
>
> @@ -2391,8 +2389,10 @@ int shmem_mcopy_atomic_pte(struct mm_struct *dst_mm,
>
> if (!*pagep) {
> page = shmem_alloc_page(gfp, info, pgoff);
> - if (!page)
> - goto out_unacct_blocks;
> + if (!page) {
> + shmem_inode_unacct_blocks(inode, 1);
> + goto out;
> + }
>
> if (!zeropage) { /* COPY */
> page_kaddr = kmap_atomic(page);
> @@ -2432,59 +2432,28 @@ int shmem_mcopy_atomic_pte(struct mm_struct *dst_mm,
> if (ret)
> goto out_release;
>
> - _dst_pte = mk_pte(page, dst_vma->vm_page_prot);
> - if (dst_vma->vm_flags & VM_WRITE)
> - _dst_pte = pte_mkwrite(pte_mkdirty(_dst_pte));
> - else {
> - /*
> - * We don't set the pte dirty if the vma has no
> - * VM_WRITE permission, so mark the page dirty or it
> - * could be freed from under us. We could do it
> - * unconditionally before unlock_page(), but doing it
> - * only if VM_WRITE is not set is faster.
> - */
> - set_page_dirty(page);
> - }
> -
> - dst_pte = pte_offset_map_lock(dst_mm, dst_pmd, dst_addr, &ptl);
> -
> - ret = -EFAULT;
> - max_off = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
> - if (unlikely(pgoff >= max_off))
> - goto out_release_unlock;
> -
> - ret = -EEXIST;
> - if (!pte_none(*dst_pte))
> - goto out_release_unlock;
> -
> - lru_cache_add(page);
> -
> spin_lock_irq(&info->lock);
> info->alloced++;
> inode->i_blocks += BLOCKS_PER_PAGE;
> shmem_recalc_inode(inode);
> spin_unlock_irq(&info->lock);
>
> - inc_mm_counter(dst_mm, mm_counter_file(page));
> - page_add_file_rmap(page, false);
> - set_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte);
> + ret = mcopy_atomic_install_pte(dst_mm, dst_pmd, dst_vma, dst_addr,
> + page, true, false);
> + if (ret)
> + goto out_release_uncharge;
>
> - /* No need to invalidate - it was non-present before */
> - update_mmu_cache(dst_vma, dst_addr, dst_pte);
> - pte_unmap_unlock(dst_pte, ptl);
> + SetPageDirty(page);
> unlock_page(page);
> ret = 0;
> out:
> return ret;
> -out_release_unlock:
> - pte_unmap_unlock(dst_pte, ptl);
> - ClearPageDirty(page);
> +out_release_uncharge:
> delete_from_page_cache(page);
> + shmem_uncharge(inode, 1);
> out_release:
> unlock_page(page);
> put_page(page);
> -out_unacct_blocks:
Will all the "goto out_release" miss one call to shmem_inode_unacct_blocks()?
> - shmem_inode_unacct_blocks(inode, 1);
> goto out;
> }
> #endif /* CONFIG_USERFAULTFD */
> diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
> index 51d8c0127161..3a9ddbb2dbbd 100644
> --- a/mm/userfaultfd.c
> +++ b/mm/userfaultfd.c
> @@ -51,18 +51,13 @@ struct vm_area_struct *find_dst_vma(struct mm_struct *dst_mm,
> /*
> * Install PTEs, to map dst_addr (within dst_vma) to page.
> *
> - * This function handles MCOPY_ATOMIC_CONTINUE (which is always file-backed),
> - * whether or not dst_vma is VM_SHARED. It also handles the more general
> - * MCOPY_ATOMIC_NORMAL case, when dst_vma is *not* VM_SHARED (it may be file
> - * backed, or not).
> - *
> - * Note that MCOPY_ATOMIC_NORMAL for a VM_SHARED dst_vma is handled by
> - * shmem_mcopy_atomic_pte instead.
> + * This function handles both MCOPY_ATOMIC_NORMAL and _CONTINUE for both shmem
> + * and anon, and for both shared and private VMAs.
> */
> -static int mcopy_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
> - struct vm_area_struct *dst_vma,
> - unsigned long dst_addr, struct page *page,
> - bool newly_allocated, bool wp_copy)
> +int mcopy_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
> + struct vm_area_struct *dst_vma,
> + unsigned long dst_addr, struct page *page,
> + bool newly_allocated, bool wp_copy)
> {
> int ret;
> pte_t _dst_pte, *dst_pte;
> --
> 2.31.1.368.gbe11c130af-goog
>
--
Peter Xu
Powered by blists - more mailing lists