[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210422075501.20207-3-mohammad.athari.ismail@intel.com>
Date: Thu, 22 Apr 2021 15:55:01 +0800
From: mohammad.athari.ismail@...el.com
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Chuah@...r.kernel.org, Kim Tatt <kim.tatt.chuah@...el.com>
Cc: Ong Boon Leong <boon.leong.ong@...el.com>,
Voon Weifeng <weifeng.voon@...el.com>,
Wong Vee Khee <vee.khee.wong@...el.com>,
Tan Tee Min <tee.min.tan@...el.com>, netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
mohammad.athari.ismail@...el.com
Subject: [PATCH net-next 2/2] stmmac: intel: Enable HW descriptor prefetch by default
From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>
Enable HW descriptor prefetch by default by setting plat->dma_cfg->dche =
true in intel_mgbe_common_data(). Need to be noted that this capability
only be supported in DWMAC core version 5.20 onwards. In stmmac, there is
a checking to check the core version. If the core version is below 5.20,
this capability wouldn`t be configured.
Below is the iperf result comparison between HW descriptor prefetch
disabled(DCHE=0b) and enabled(DCHE=1b). Tested on Intel Elkhartlake
platform with DWMAC Core 5.20. Observed line rate performance
improvement with HW descriptor prefetch enabled.
DCHE = 0b
[ 5] local 169.254.1.162 port 42123 connected to 169.254.244.142 port 5201
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 96.7 MBytes 811 Mbits/sec 70050
[ 5] 1.00-2.00 sec 96.5 MBytes 809 Mbits/sec 69850
[ 5] 2.00-3.00 sec 96.3 MBytes 808 Mbits/sec 69720
[ 5] 3.00-4.00 sec 95.9 MBytes 804 Mbits/sec 69450
[ 5] 4.00-5.00 sec 96.0 MBytes 806 Mbits/sec 69530
[ 5] 5.00-6.00 sec 96.8 MBytes 812 Mbits/sec 70080
[ 5] 6.00-7.00 sec 96.9 MBytes 813 Mbits/sec 70140
[ 5] 7.00-8.00 sec 96.8 MBytes 812 Mbits/sec 70080
[ 5] 8.00-9.00 sec 97.0 MBytes 814 Mbits/sec 70230
[ 5] 9.00-10.00 sec 96.9 MBytes 813 Mbits/sec 70170
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.000 ms 0/699300 (0%) sender
[ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.011 ms 0/699265 (0%) receiver
DCHE = 1b
[ 5] local 169.254.1.162 port 49740 connected to 169.254.244.142 port 5201
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 97.9 MBytes 821 Mbits/sec 70880
[ 5] 1.00-2.00 sec 98.1 MBytes 823 Mbits/sec 71060
[ 5] 2.00-3.00 sec 98.2 MBytes 824 Mbits/sec 71140
[ 5] 3.00-4.00 sec 98.2 MBytes 824 Mbits/sec 71090
[ 5] 4.00-5.00 sec 98.1 MBytes 823 Mbits/sec 71050
[ 5] 5.00-6.00 sec 98.1 MBytes 823 Mbits/sec 71040
[ 5] 6.00-7.00 sec 98.1 MBytes 823 Mbits/sec 71050
[ 5] 7.00-8.00 sec 98.2 MBytes 824 Mbits/sec 71140
[ 5] 8.00-9.00 sec 98.2 MBytes 824 Mbits/sec 71120
[ 5] 9.00-10.00 sec 98.3 MBytes 824 Mbits/sec 71150
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.000 ms 0/710720 (0%) sender
[ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.041 ms 0/710650 (0%) receiver
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 4bd038acb1b9..80728a4c0e3f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -471,6 +471,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
plat->dma_cfg->fixed_burst = 0;
plat->dma_cfg->mixed_burst = 0;
plat->dma_cfg->aal = 0;
+ plat->dma_cfg->dche = true;
plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
GFP_KERNEL);
--
2.17.1
Powered by blists - more mailing lists