Message-ID: <CAAOTY__JZsAmGtX-+hNu0123xKoEdP2CgGxmQK2bqa-i+3dr6Q@mail.gmail.com>
Date:   Sat, 24 Apr 2021 07:50:07 +0800
From:   Chun-Kuang Hu <chunkuang.hu@...nel.org>
To:     Jitao Shi <jitao.shi@...iatek.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...ux.ie>,
        DRI Development <dri-devel@...ts.freedesktop.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        srv_heupstream <srv_heupstream@...iatek.com>,
        huijuan.xie@...iatek.com, stonea168@....com,
        Cawa Cheng <cawa.cheng@...iatek.com>,
        Rex-BC Chen <rex-bc.chen@...iatek.com>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>, yingjoe.chen@...iatek.com,
        eddie.huang@...iatek.com,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 4/4] drm/mediatek: add dsi module reset driver

Hi, Jitao:

Jitao Shi <jitao.shi@...iatek.com> 於 2021年4月20日 週二 下午9:26寫道：
>
> Reset dsi HW to default when power on. Prevent the setting differet
> between bootloader and kernel.
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 36 +++++++++++++++++++++++++++++-
>  1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 455fe582c6b5..113438ddd4cc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -7,10 +7,12 @@
>  #include <linux/component.h>
>  #include <linux/iopoll.h>
>  #include <linux/irq.h>
> +#include <linux/mfd/syscon.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/regmap.h>
>
>  #include <video/mipi_display.h>
>  #include <video/videomode.h>
> @@ -143,6 +145,8 @@
>  #define DATA_0                         (0xff << 16)
>  #define DATA_1                         (0xff << 24)
>
> +#define MMSYS_SW_RST_DSI_B BIT(25)
> +
>  #define NS_TO_CYCLE(n, c)    ((n) / (c) + (((n) % (c)) ? 1 : 0))
>
>  #define MTK_DSI_HOST_IS_READ(type) \
> @@ -186,7 +190,8 @@ struct mtk_dsi {
>         struct drm_bridge *next_bridge;
>         struct drm_connector *connector;
>         struct phy *phy;
> -
> +       struct regmap *mmsys_sw_rst_b;
> +       u32 sw_rst_b;
>         void __iomem *regs;
>
>         struct clk *engine_clk;
> @@ -272,6 +277,16 @@ static void mtk_dsi_disable(struct mtk_dsi *dsi)
>         mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_EN, 0);
>  }
>
> +static void mtk_dsi_reset_all(struct mtk_dsi *dsi)
> +{
> +       regmap_update_bits(dsi->mmsys_sw_rst_b, dsi->sw_rst_b,
> +                          MMSYS_SW_RST_DSI_B, 0);
> +       usleep_range(1000, 1100);
> +
> +       regmap_update_bits(dsi->mmsys_sw_rst_b, dsi->sw_rst_b,
> +                          MMSYS_SW_RST_DSI_B, MMSYS_SW_RST_DSI_B);
> +}
> +
>  static void mtk_dsi_reset_engine(struct mtk_dsi *dsi)
>  {
>         mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_RESET, DSI_RESET);
> @@ -985,6 +1000,8 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>
>         ret = mtk_dsi_encoder_init(drm, dsi);
>
> +       mtk_dsi_reset_all(dsi);
> +
>         return ret;
>  }
>
> @@ -1007,6 +1024,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>         struct device *dev = &pdev->dev;
>         struct drm_panel *panel;
>         struct resource *regs;
> +       struct regmap *regmap;
>         int irq_num;
>         int ret;
>
> @@ -1022,6 +1040,22 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>                 return ret;
>         }
>
> +       regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
> +                                                "mediatek,syscon-dsi");
> +       ret = of_property_read_u32_index(dev->of_node, "mediatek,syscon-dsi", 1,
> +                                        &dsi->sw_rst_b);
> +
> +       if (IS_ERR(regmap))
> +               ret = PTR_ERR(regmap);
> +
> +       if (ret) {
> +               ret = PTR_ERR(regmap);
> +               dev_err(dev, "Failed to get mmsys registers: %d\n", ret);
> +               return ret;
> +       }
> +
> +       dsi->mmsys_sw_rst_b = regmap;
> +

It looks like that mtk-mmsys is the reset controller and mtk-dsi is
reset consumer. Please refer to [1], [2] to implement.

[1] https://www.kernel.org/doc/html/latest/driver-api/reset.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/reset/reset.txt?h=v5.12-rc8

Regards,
Chun-Kuang.

>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
>                                           &panel, &dsi->next_bridge);
>         if (ret)
> --
> 2.25.1
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists