| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210423153329.33457-2-erik.rosen@metormote.com>
Date: Fri, 23 Apr 2021 17:33:28 +0200
From: Erik Rosen <erik.rosen@...ormote.com>
To: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Erik Rosen <erik.rosen@...ormote.com>
Subject: [PATCH 1/2] hwmon: (pmbus/zl6100) Add support for ZLS1003, ZLS4009 and ZL8802
Add support for Renesas ZL8802 Dual Channel/Dual Phase PMBus DC/DC
Digital Controller as well as ZLS1003 and ZLS4009 custom DC/DC
controller chips.
Signed-off-by: Erik Rosen <erik.rosen@...ormote.com>
---
drivers/hwmon/pmbus/zl6100.c | 94 ++++++++++++++++++++++++++++++------
1 file changed, 80 insertions(+), 14 deletions(-)
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 69120ca7aaa8..757039bb8a62 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -18,7 +18,7 @@
#include "pmbus.h"
enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105,
- zl9101, zl9117 };
+ zl8802, zl9101, zl9117, zls1003, zls4009 };
struct zl6100_data {
int id;
@@ -34,6 +34,13 @@ struct zl6100_data {
#define ZL6100_MFR_XTEMP_ENABLE BIT(7)
+#define ZL8802_MFR_USER_GLOBAL_CONFIG 0xe9
+#define ZL8802_MFR_TMON_ENABLE BIT(12)
+#define ZL8802_MFR_USER_CONFIG 0xd1
+#define ZL8802_MFR_XTEMP_ENABLE_2 BIT(1)
+#define ZL8802_MFR_DDC_CONFIG 0xd3
+#define ZL8802_MFR_PHASES_MASK 0x0007
+
#define MFR_VMON_OV_FAULT_LIMIT 0xf5
#define MFR_VMON_UV_FAULT_LIMIT 0xf6
#define MFR_READ_VMON 0xf7
@@ -132,7 +139,7 @@ static int zl6100_read_word_data(struct i2c_client *client, int page,
struct zl6100_data *data = to_zl6100_data(info);
int ret, vreg;
- if (page > 0)
+ if (page >= info->pages)
return -ENXIO;
if (data->id == zl2005) {
@@ -191,7 +198,7 @@ static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
struct zl6100_data *data = to_zl6100_data(info);
int ret, status;
- if (page > 0)
+ if (page >= info->pages)
return -ENXIO;
zl6100_wait(data);
@@ -230,7 +237,7 @@ static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
struct zl6100_data *data = to_zl6100_data(info);
int ret, vreg;
- if (page > 0)
+ if (page >= info->pages)
return -ENXIO;
switch (reg) {
@@ -271,7 +278,7 @@ static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
struct zl6100_data *data = to_zl6100_data(info);
int ret;
- if (page > 0)
+ if (page >= info->pages)
return -ENXIO;
zl6100_wait(data);
@@ -287,6 +294,10 @@ static const struct i2c_device_id zl6100_id[] = {
{"bmr462", zl2008},
{"bmr463", zl2008},
{"bmr464", zl2008},
+ {"bmr465", zls4009},
+ {"bmr466", zls1003},
+ {"bmr467", zls4009},
+ {"bmr469", zl8802},
{"zl2004", zl2004},
{"zl2005", zl2005},
{"zl2006", zl2006},
@@ -295,15 +306,18 @@ static const struct i2c_device_id zl6100_id[] = {
{"zl2106", zl2106},
{"zl6100", zl6100},
{"zl6105", zl6105},
+ {"zl8802", zl8802},
{"zl9101", zl9101},
{"zl9117", zl9117},
+ {"zls1003", zls1003},
+ {"zls4009", zls4009},
{ }
};
MODULE_DEVICE_TABLE(i2c, zl6100_id);
static int zl6100_probe(struct i2c_client *client)
{
- int ret;
+ int ret, i;
struct zl6100_data *data;
struct pmbus_driver_info *info;
u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
@@ -367,18 +381,70 @@ static int zl6100_probe(struct i2c_client *client)
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
/*
- * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
- * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+ * ZL2004, ZL8802, ZL9101M, ZL9117M and ZLS4009 support monitoring
+ * an extra voltage (VMON for ZL2004, ZL8802 and ZLS4009,
+ * VDRV for ZL9101M and ZL9117M). Report it as vmon.
*/
- if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+ if (data->id == zl2004 || data->id == zl8802 || data->id == zl9101 ||
+ data->id == zl9117 || data->id == zls4009)
info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
- ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
- if (ret < 0)
- return ret;
+ /*
+ * ZL8802 has two outputs that can be used either independently or in
+ * a current sharing configuration. The driver uses the DDC_CONFIG
+ * register to check if the module is running with independent or
+ * shared outputs. If the module is in shared output mode, only one
+ * output voltage will be reported.
+ */
+ if (data->id == zl8802) {
+ info->pages = 2;
+ info->func[0] |= PMBUS_HAVE_IIN;
+
+ ret = i2c_smbus_read_word_data(client, ZL8802_MFR_DDC_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ if (ret & ZL8802_MFR_PHASES_MASK)
+ info->func[1] |= PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+ else
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
- if (ret & ZL6100_MFR_XTEMP_ENABLE)
- info->func[0] |= PMBUS_HAVE_TEMP2;
+ for (i = 0; i < 2; i++) {
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+ if (ret < 0)
+ return ret;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ ret = i2c_smbus_read_word_data(client, ZL8802_MFR_USER_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ZL8802_MFR_XTEMP_ENABLE_2)
+ info->func[i] |= PMBUS_HAVE_TEMP2;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
+ }
+ ret = i2c_smbus_read_word_data(client, ZL8802_MFR_USER_GLOBAL_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ZL8802_MFR_TMON_ENABLE)
+ info->func[0] |= PMBUS_HAVE_TEMP3;
+ } else {
+ ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ZL6100_MFR_XTEMP_ENABLE)
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+ }
data->access = ktime_get();
zl6100_wait(data);
--
2.20.1
Powered by blists - more mailing lists