[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210423163437.89306-2-andriy.shevchenko@linux.intel.com>
Date: Fri, 23 Apr 2021 19:34:25 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mark Brown <broonie@...nel.org>,
Cezary Rojewski <cezary.rojewski@...el.com>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-spi@...r.kernel.org,
alsa-devel@...a-project.org
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Liam Girdwood <liam.r.girdwood@...ux.intel.com>,
Jie Yang <yang.jie@...ux.intel.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Subject: [PATCH v1 02/14] spi: pxa2xx: Utilize MMIO and physical base from struct ssp_device
We have a duplication of MMIO and physical base addresses in
the struct driver_data, get rid of it and reuse members from
struct ssp_device instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/spi/spi-pxa2xx-dma.c | 4 ++--
drivers/spi/spi-pxa2xx.c | 4 +---
drivers/spi/spi-pxa2xx.h | 14 ++++----------
3 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 37567bc7a523..3b27f356a18f 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -94,14 +94,14 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
cfg.direction = dir;
if (dir == DMA_MEM_TO_DEV) {
- cfg.dst_addr = drv_data->ssdr_physical;
+ cfg.dst_addr = drv_data->ssp->phys_base + SSDR;
cfg.dst_addr_width = width;
cfg.dst_maxburst = chip->dma_burst_size;
sgt = &xfer->tx_sg;
chan = drv_data->controller->dma_tx;
} else {
- cfg.src_addr = drv_data->ssdr_physical;
+ cfg.src_addr = drv_data->ssp->phys_base + SSDR;
cfg.src_addr_width = width;
cfg.src_maxburst = chip->dma_burst_size;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 0ef22045b006..82df028c4a71 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -325,7 +325,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
u32 value;
config = lpss_get_config(drv_data);
- drv_data->lpss_base = drv_data->ioaddr + config->offset;
+ drv_data->lpss_base = drv_data->ssp->mmio_base + config->offset;
/* Enable software chip select control */
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
@@ -1729,8 +1729,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->ssp_type = ssp->type;
- drv_data->ioaddr = ssp->mmio_base;
- drv_data->ssdr_physical = ssp->phys_base + SSDR;
if (pxa25x_ssp_comp(drv_data)) {
switch (drv_data->ssp_type) {
case QUARK_X1000_SSP:
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 1400472bc986..ad9980ebefa6 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -33,10 +33,6 @@ struct driver_data {
/* PXA hookup */
struct pxa2xx_spi_controller *controller_info;
- /* SSP register addresses */
- void __iomem *ioaddr;
- phys_addr_t ssdr_physical;
-
/* SSP masks*/
u32 dma_cr1;
u32 int_cr1;
@@ -87,16 +83,14 @@ struct chip_data {
void (*cs_control)(u32 command);
};
-static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data,
- unsigned reg)
+static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg)
{
- return __raw_readl(drv_data->ioaddr + reg);
+ return pxa_ssp_read_reg(drv_data->ssp, reg);
}
-static inline void pxa2xx_spi_write(const struct driver_data *drv_data,
- unsigned reg, u32 val)
+static inline void pxa2xx_spi_write(const struct driver_data *drv_data, u32 reg, u32 val)
{
- __raw_writel(val, drv_data->ioaddr + reg);
+ pxa_ssp_write_reg(drv_data->ssp, reg, val);
}
#define DMA_ALIGNMENT 8
--
2.30.2
Powered by blists - more mailing lists