[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210423095743.v5.11.I4c0b4a87e4dc19e5023b4d0a21bbfa6d9c09ebd8@changeid>
Date: Fri, 23 Apr 2021 09:58:57 -0700
From: Douglas Anderson <dianders@...omium.org>
To: Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Sam Ravnborg <sam@...nborg.org>, Wolfram Sang <wsa@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, robdclark@...omium.org,
Stanislav Lisovskiy <stanislav.lisovskiy@...el.com>,
Stephen Boyd <swboyd@...omium.org>,
Steev Klimaszewski <steev@...i.org>,
Linus W <linus.walleij@...aro.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
linux-i2c@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
dri-devel@...ts.freedesktop.org,
Douglas Anderson <dianders@...omium.org>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
Robert Foss <robert.foss@...aro.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH v5 11/20] drm/bridge: ti-sn65dsi86: Use pm_runtime autosuspend
Let's make the bridge use autosuspend with a 500ms delay. This is in
preparation for promoting DP AUX transfers to their own sub-driver so
that we're not constantly powering up and down the device as we
transfer all the chunks.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
(no changes since v1)
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 0bd1a1d1453e..49b76b2ffe25 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -243,7 +243,7 @@ static int status_show(struct seq_file *s, void *data)
seq_printf(s, "[0x%02x] = 0x%08x\n", reg, val);
}
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
return 0;
}
@@ -293,7 +293,7 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector)
if (!edid) {
pm_runtime_get_sync(pdata->dev);
edid = pdata->edid = drm_get_edid(connector, &pdata->aux.ddc);
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
}
if (edid && drm_edid_is_valid(edid)) {
@@ -419,7 +419,7 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
/* check if continuous dsi clock is required or not */
pm_runtime_get_sync(pdata->dev);
regmap_read(pdata->regmap, SN_DPPLL_SRC_REG, &val);
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
if (!(val & DPPLL_CLK_SRC_DSICLK))
dsi->mode_flags |= MIPI_DSI_CLOCK_NON_CONTINUOUS;
@@ -1050,7 +1050,7 @@ static int ti_sn_bridge_gpio_get(struct gpio_chip *chip, unsigned int offset)
*/
pm_runtime_get_sync(pdata->dev);
ret = regmap_read(pdata->regmap, SN_GPIO_IO_REG, &val);
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
if (ret)
return ret;
@@ -1101,7 +1101,7 @@ static int ti_sn_bridge_gpio_direction_input(struct gpio_chip *chip,
* it off and when it comes back it will have lost all state, but
* that's OK because the default is input and we're now an input.
*/
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
return 0;
}
@@ -1127,7 +1127,7 @@ static int ti_sn_bridge_gpio_direction_output(struct gpio_chip *chip,
SN_GPIO_MUX_OUTPUT << shift);
if (ret) {
clear_bit(offset, pdata->gchip_output);
- pm_runtime_put(pdata->dev);
+ pm_runtime_put_autosuspend(pdata->dev);
}
return ret;
@@ -1418,6 +1418,8 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev);
if (ret)
return ret;
+ pm_runtime_set_autosuspend_delay(pdata->dev, 500);
+ pm_runtime_use_autosuspend(pdata->dev);
ti_sn65dsi86_debugfs_init(pdata);
--
2.31.1.498.g6c1eba8ee3d-goog
Powered by blists - more mailing lists