linux-kernel - [PATCH v1 1/1] extcon-intel-mrfld: initialize mrfld

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210424174138.175889-1-ftoth@exalondelft.nl>
Date:   Sat, 24 Apr 2021 19:41:38 +0200
From:   Ferry Toth <ftoth@...londelft.nl>
To:     linux-kernel@...r.kernel.org
Cc:     MyungJoo Ham <myungjoo.ham@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Ferry Toth <ftoth@...londelft.nl>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v1 1/1] extcon-intel-mrfld: initialize mrfld_extcon status

extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.

Signed-off-by: Ferry Toth <ftoth@...londelft.nl>
Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
---
 drivers/extcon/extcon-intel-mrfld.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/extcon/extcon-intel-mrfld.c b/drivers/extcon/extcon-intel-mrfld.c
index f47016fb28a8..cd1a5f230077 100644
--- a/drivers/extcon/extcon-intel-mrfld.c
+++ b/drivers/extcon/extcon-intel-mrfld.c
@@ -197,6 +197,7 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
 	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
 	struct regmap *regmap = pmic->regmap;
 	struct mrfld_extcon_data *data;
+	unsigned int status;
 	unsigned int id;
 	int irq, ret;
 
@@ -244,6 +245,14 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
 	/* Get initial state */
 	mrfld_extcon_role_detect(data);
 
+	/*
+	 * Cached status value is used for cable detection, see comments
+	 * in mrfld_extcon_cable_detect(), we need to sync cached value
+	 * with a real state of the hardware.
+	 */
+	regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	data->status = status;
+
 	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
 	mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
 
-- 
2.27.0