[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAJMQK-govRgDfKhzxhe-GPBQ27EEfpmsxbbNH6X=6CTni=uqRA@mail.gmail.com>
Date: Mon, 26 Apr 2021 13:19:59 +0800
From: Hsin-Yi Wang <hsinyi@...omium.org>
To: Sean Paul <sean@...rly.run>
Cc: Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
dri-devel <dri-devel@...ts.freedesktop.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
devicetree <devicetree@...r.kernel.org>
Subject: Re: [PATCH 1/2] drm/mediatek: set panel orientation before drm_dev_register().
On Fri, Apr 23, 2021 at 9:53 PM Sean Paul <sean@...rly.run> wrote:
>
> On Fri, Apr 9, 2021 at 12:53 AM Hsin-Yi Wang <hsinyi@...omium.org> wrote:
> >
> > drm_dev_register() sets connector->registration_state to
> > DRM_CONNECTOR_REGISTERED and dev->registered to true. If
> > drm_connector_set_panel_orientation() is first called after
> > drm_dev_register(), it will fail several checks and results in following
> > warning. So set panel orientation in dsi before drm_dev_register() is
> > called.
> >
> > [ 4.480976] ------------[ cut here ]------------
> > [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
> > <snip>
> > [ 4.609772] Call trace:
> > [ 4.612208] __drm_mode_object_add+0xb4/0xbc
> > [ 4.616466] drm_mode_object_add+0x20/0x2c
> > [ 4.620552] drm_property_create+0xdc/0x174
> > [ 4.624723] drm_property_create_enum+0x34/0x98
> > [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0
> > [ 4.634716] boe_panel_get_modes+0x88/0xd8
> > [ 4.638802] drm_panel_get_modes+0x2c/0x48
> > [ 4.642887] panel_bridge_get_modes+0x1c/0x28
> > [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4
> > [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700
> > [ 4.658266] drm_mode_getconnector+0x1b4/0x45c
> > [ 4.662699] drm_ioctl_kernel+0xac/0x128
> > [ 4.666611] drm_ioctl+0x268/0x410
> > [ 4.670002] drm_compat_ioctl+0xdc/0xf0
> > [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100
> > [ 4.678436] el0_svc_common+0xf4/0x1c0
> > [ 4.682174] do_el0_svc_compat+0x28/0x3c
> > [ 4.686088] el0_svc_compat+0x10/0x1c
> > [ 4.689738] el0_sync_compat_handler+0xa8/0xcc
> > [ 4.694171] el0_sync_compat+0x178/0x180
> > [ 4.698082] ---[ end trace b4f2db9d9c88610b ]---
> > [ 4.702721] ------------[ cut here ]------------
> > [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
> > <snip>
> > [ 4.833830] Call trace:
> > [ 4.836266] drm_object_attach_property+0x48/0xb8
> > [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0
> > [ 4.846432] boe_panel_get_modes+0x88/0xd8
> > [ 4.850516] drm_panel_get_modes+0x2c/0x48
> > [ 4.854600] panel_bridge_get_modes+0x1c/0x28
> > [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4
> > [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700
> > [ 4.869978] drm_mode_getconnector+0x1b4/0x45c
> > [ 4.874410] drm_ioctl_kernel+0xac/0x128
> > [ 4.878320] drm_ioctl+0x268/0x410
> > [ 4.881711] drm_compat_ioctl+0xdc/0xf0
> > [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100
> > [ 4.890142] el0_svc_common+0xf4/0x1c0
> > [ 4.893879] do_el0_svc_compat+0x28/0x3c
> > [ 4.897791] el0_svc_compat+0x10/0x1c
> > [ 4.901441] el0_sync_compat_handler+0xa8/0xcc
> > [ 4.905873] el0_sync_compat+0x178/0x180
> > [ 4.909783] ---[ end trace b4f2db9d9c88610c ]---
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dsi.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > index ae403c67cbd9..45a702ee09f3 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > @@ -205,6 +205,7 @@ struct mtk_dsi {
> > u32 irq_data;
> > wait_queue_head_t irq_wait_queue;
> > const struct mtk_dsi_driver_data *driver_data;
> > + enum drm_panel_orientation orientation;
> > };
> >
> > static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
> > @@ -966,6 +967,8 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
> > }
> > drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
> >
> > + drm_connector_set_panel_orientation(dsi->connector, dsi->orientation);
> > +
> > return 0;
> >
> > err_cleanup_encoder:
> > @@ -1029,6 +1032,12 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> > ret = PTR_ERR(dsi->next_bridge);
> > goto err_unregister_host;
> > }
> > +
> > + ret = of_drm_get_panel_orientation(panel->dev->of_node, &dsi->orientation);
> > + if (ret) {
> > + dev_err(dev, "failed to get panel orientation %d\n", ret);
> > + return ret;
> > + }
>
> I don't think this is the right place to mine orientation since it
> duplicates the call from the panel driver.
>
> Instead, how about splitting out
> property_create_enum/attach_orientation_property from
> set_panel_orientation such that you can attach the property (with
> UNKNOWN value) in the connector init and then leave the panel to set
> it properly in get_modes (I kind of disagree with populating this in
> get_modes as well, but I don't think there's anywhere else to stick it
> right now)?
>
> AFAICT orientation is the only property which has the create/attach
> calls in the set function which seems like a perfect recipe for this
> type of failure.
>
>
> Sean
>
Thanks for the review. It is updated in v2.
> > }
> >
> > dsi->driver_data = of_device_get_match_data(dev);
> > --
> > 2.31.1.295.g9ea45b61b8-goog
> >
Powered by blists - more mailing lists